Page 4 of 8 FirstFirst 12345678 LastLast
Results 61 to 80 of 143

Thread: The Youtube and Video Link thread

  1. #61
    Join Date
    Jul 2011
    Location
    GA
    Posts
    34

    Support BladeForums!
    Paid memberships don't see ads!
    1 inch drill bit to dagger conversion for Airman to take... over there.

    http://www.youtube.com/watch?v=PgNdNF_qq5Q
    Last edited by RLLyon; 10-29-2013 at 07:16 PM. Reason: text added

  2. #62
    Quote Originally Posted by thegeek574 View Post
    Everyone,
    This is something that was started on another forum I frequent, and I thought it was a good idea. Youtube can be such a huge resource that gathering all the cool videos into one place can't possibly be a bad idea (I know, I know, famous last words).

    Try to keep the chatter down, or if you are going to chatter, then post a cool video with every post. If this works, then we could have something really cool.

    I'll start.


    ETA: Videos, unless there is objection, can be anything forging, grinding, knifemaking tool related. However, try not to stray too far away. Eg. "450 lb powerhammer"- Awesome. "Fitting guards"- cool. "epic knife fail LOL XD"- not so much
    What kind of tempering was done on this video? i know oil, air, water and cryo. what material was this axe put into?

  3. #63
    Join Date
    Feb 2009
    Location
    So Cal
    Posts
    3,925
    Knife made from a file by Bladesmith Walter Sorrells


  4. #64
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,551
    Kevin speaking about daggers

    This video starts midway, if anyone has the beginning video I'd love to see it.


  5. #65
    Join Date
    Feb 2009
    Location
    So Cal
    Posts
    3,925
    How to Choose Steel for Knife Making



  6. #66
    Join Date
    Nov 2003
    Location
    Austin, TX
    Posts
    1,010
    "The World's Ugliest Knife"


  7. #67
    Join Date
    Oct 1998
    Location
    SW Wisconsin
    Posts
    1,394
    Sorry for sticking this in the wrong place first bladsmith No problem...it is a good video - Stacy.

    I found this very interesting-

    Construction of a celtic knife
    http://www.liveleak.com/view?i=330_1389891052
    Last edited by Stacy E. Apelt - Bladesmith; 01-17-2014 at 03:54 PM.

  8. #68
    Join Date
    May 2013
    Location
    Ithaca, New York, USA
    Posts
    308
    Guy makes 2x72 grinder from treadmill (uses part of chassis, the motor, the control board) and uses skateboard wheels as idlers.



    90,000 SFPM 2x72 KMG clone (holy crap)


  9. #69
    Join Date
    Dec 1999
    Location
    Castle Rock, Washington U.S.A.
    Posts
    9,429
    Normally I would not submit something of my own... but hopefully this can serve a purpose.

    I tried to make some changes to a finished knife but made it worse and I ended up at a point where I KNOW many makers, ESPECIALLY NEW makers, find themselves....

    ----There is something wrong with your knife. Any type of "fix" is going to look as such. The only way to really fix the problem is to grit your teeth and start over.

    It really sucks, but sometimes 'ya just gotta quit thinking about the time/work lost if you start over, and only accept your best.



    I was in that EXACT same spot before I shot this video.


  10. #70
    Join Date
    Apr 2010
    Location
    Knoxville, TN
    Posts
    22,618
    Nick's Hand Sanding 101...

    Terrio HandMade Knives subforum

    Beckerhead # 350

    Member, AKTI and KnifeRights

  11. #71
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,551
    How about giving this a try, just in time for your valentine day gift.



  12. #72
    Join Date
    Nov 2006
    Location
    Chacabuco, Argentina
    Posts
    411
    This is the making of one of mine:

    1° part:


    2° part:

  13. #73
    Join Date
    Aug 2010
    Location
    jakarta, indonesia
    Posts
    4
    Homemade variable speed belt sander. Angle grinder as drive motor

    It is guaranteed works, I have one in my garage
    Last edited by leafspring; 02-22-2014 at 10:41 AM.

  14. #74
    Join Date
    Dec 2013
    Location
    Sanger, TX
    Posts
    1,093
    Three part knife build by Walter Sorrells. Covers a lot of information. He's really built up a nice collection of videos for the would-be knifemaker.

    Bob






  15. #75
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,551

  16. #76
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,551

  17. This is a tutorial on how to make a real knife by using the stock removal method which is easier and requires fewer tools and less skill. Great for beginners. I will be using the forge to harden and temper this blade but there are alternatives.
    In this half of the tutorial I show you how to make the template, cut out the profile of the knife blade, drill the holes for the handle and file the bevels for the sharp edge of the knife.



  18. #78
    Join Date
    Oct 2011
    Location
    Rockland County, NY, USA
    Posts
    3,223
    I'm sure many of you have seen this one but it's still interesting.

    https://www.youtube.com/watch?v=VE_4zHNcieM

  19. #79
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,551
    This guy is an engineer with a passion for woodworking and building stuff on the cheap.

    He has several videos on dust collection



  20. #80
    Join Date
    Dec 2013
    Location
    Sanger, TX
    Posts
    1,093
    Kikuichi knife making in Japan. Fascinating stuff!

    Bob


Page 4 of 8 FirstFirst 12345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •