Page 5 of 8 FirstFirst 12345678 LastLast
Results 81 to 100 of 143

Thread: The Youtube and Video Link thread

  1. #81
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,553

    Support BladeForums!
    Paid memberships don't see ads!
    Kevin Potter showing rebound on different anvils


  2. #82
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,553
    He's talking about custom orders in kydex holsters, but the discussion on when to take a custom order vs when to educate the customer on his bad choices applies



  3. #83
    Join Date
    Oct 2011
    Location
    Rockland County, NY, USA
    Posts
    3,224

  4. #84
    Join Date
    Aug 2010
    Location
    Federal Way, WA
    Posts
    996
    I thought this was a neat vid that some of you may also find interesting. It shows how different rasps are forged and made by hand



    -Paul


    My Channel Lsubslimed

  5. #85
    Join Date
    Nov 2013
    Location
    Topeka, KS
    Posts
    1,171
    I love videos like that coldsteelburns, thanks

  6. #86
    Join Date
    Nov 2003
    Location
    Austin, TX
    Posts
    1,010
    Tumbler made with a 5 gallon bucket and drill:


  7. #87
    Join Date
    Jul 2013
    Location
    BC, Canada
    Posts
    2,412
    A pretty cool Damascus sword. Music is a bit much though.




    Here's a really cool sword video featuring Kevin Cashen.

    Last edited by S.Alexander; 01-11-2015 at 07:06 PM.
    Shane

    Check out my work: http://sacustomknives.wordpress.com/

    Instagram: @sa_custom_knives

  8. #88
    Join Date
    Nov 2012
    Location
    Alabama
    Posts
    358

  9. #89
    Join Date
    Dec 2013
    Location
    Sanger, TX
    Posts
    1,093
    Since I've started into titanium framelocks and linerlocks, I've been searching for good info on various subjects. Here's two videos I found very helpful.

    John Grimsmo on carbidizing lock faces.



    This guy goes by M0DiFiDEZ and he has a lot of good info on anodizing. He's definitely a little dry and slow getting to the point but, the information is gold!

    Knives with Integrity!
    ABS Apprentice Smith - Blade Show table #8P
    RangerMadeKnives.com Follow me on Facebook and Instagram

  10. #90
    Join Date
    Jul 2013
    Location
    Santa Monica Ca,
    Posts
    12,429
    This is an interview of Master Smith, Jerry Fisk on Forge welding,
    It's in a Pilot put together by Jesse James of West coast choppers that is now making some cool looking 1911's with Damascus slides. There are also some great wood working tips by a master furniture maker.

    This is not an endorsement of Jesse James, his show nor is it a discussion about his private life what you think of him or his motorcycles, prices etc

    OK?

    So if you have comments regarding the process of learning forge welding, 1911 pistols or wood working your comments are welcome.

    If you are bored and just want to trash someone or something that you can't afford, kindly refrain from posting here!

    Thank you and enjoy this informative video on Forge Welding and wood working.
    https://www.youtube.com/watch?v=Y_DTKASREEM
    Laurence

    Custom Culinary Knives & Sharpening


    www.rhinoknives.com
    www.westsidesharpening.com

    Designer and maker of Rhino Finger Skins, Thermal protection for grinding hardened steel.
    www.rhinofingerskins.com


    Go Raptors!.

  11. #91
    Join Date
    Jul 2013
    Location
    BC, Canada
    Posts
    2,412
    Plungeless sweeping grinds.

    Shane

    Check out my work: http://sacustomknives.wordpress.com/

    Instagram: @sa_custom_knives

  12. #92
    Join Date
    Oct 2013
    Location
    Central Coast California
    Posts
    3

    Cool Idea ~ I Scroll You-Tube as Frequent as Possible ~ Always learn Something ~


  13. #93
    Join Date
    Jul 2009
    Location
    Ontario, Canada
    Posts
    12,553

  14. #94
    Join Date
    Jan 2014
    Location
    Houston
    Posts
    139
    thanks for posting that! i thoroughly enjoyed the entire thing. not usually a fan of jesse but his willingness to learn and genuine love for handmade was cool to see. and jerry fisk looks like a super cool guy, that would be fun to hang out with him!

  15. #95
    This is a video I made. This was the first knife I made and MOST of the information I used came from this site. After completing the knife I intended to do a full destructive test just to see how it went. The knife held up so well I called it good and quit early. Still have the blade in my camping gear today. I'm hoping this will add to the information base

    I'm really grateful for all the info, I thought this would be an appropriate place to share back to the community. Feel free to move/delete if not appropriate.



    https://www.youtube.com/watch?v=9MMvscz9JZI

  16. #96
    Join Date
    Jan 2005
    Location
    Lunenburg, NS, Canada
    Posts
    8,922
    I forgot about this thread. Here is a short 3 part series I made discussing my experiences with developing hammer technique.



    "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." - Daniel J. Boorstin



    Rick Marchand
    ABS Apprentice Smith
    wildertools.com

    Follow me on Instagram: wildertools

  17. #97
    Join Date
    Aug 2010
    Location
    Federal Way, WA
    Posts
    996
    Love the vids Rick! I also love your post anvil. I'm looking to buy one of the 4x4x4" stake anvils from Old World Anvils and was wondering if you had any suggestions as to whether I should put it in a stump as they suggest on their site, or if I should put in in a tube filled with cement like you did. I am trying to make it as quite as possible because I live in a neighbor hood where the hourses are pretty dang close together, so just wodering if you had any thought on that?

    Also, I think I remember reading somewhere a while ago that you post anvil is quite a bit taller than 4", do you think the stake would work as well as yours if set up the same way? Also, you by any chance know where I might be able to pick up one the size you got from, if there is a good difference in performance and "noise" level as well? Sorry, maybe I should start a new thread but well see how deep this goes first Thanks man

    btw- I just bought a batch of that DHIII W2 in 7/8ths inch so I am wanting to upgrade from the setup I have. I have forged out 7 bars of wrought iron in 7/8ths before (yes I know there is a big difference between that and W2) as well as a long bolt I found along the railroad in pretty much the same diameter, which was pretty damn tough, but I was able to pull it off.. which is my point. I figured I might need to type that as a disclamer so people don't think I'm cookoo lol

    ~Paul


    My YT Channel Lsubslimed

  18. #98
    Join Date
    Jan 2014
    Location
    V^n Isle, Canada / Kansai, J^pan
    Posts
    277
    ...one of North America’s best-kept secrets in bladesmithing and the closest thing we have to a living (inter)national treasure...Louie Mills in some recently release footage from 2013:



    Serious students of the forge can watch the rhythms and patterns of the full-length process here: youtu.be/eSfurMT0TY0
    and here's a clip from his History Channel appearance: youtube.com/watch?v=G3UILh0Nk4A

  19. #99
    Join Date
    Jan 2005
    Location
    Lunenburg, NS, Canada
    Posts
    8,922
    Cool video, Dave. I took part in a traditional smelt in Michigan. Kevin Cashen's "Iron Age Challenge". Definitely not an easy skill. Louie is so smooth.

    I like the history channel clip when the host says that the "samurai swordmakers" perfected the science of combining carbon and iron... then secret became lost. Ha! I love the mystique, intrigue, controversy and drama they always seem to wiggle in there. Gotta get the ratings.
    "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." - Daniel J. Boorstin



    Rick Marchand
    ABS Apprentice Smith
    wildertools.com

    Follow me on Instagram: wildertools

  20. #100
    Join Date
    Jan 2014
    Location
    V^n Isle, Canada / Kansai, J^pan
    Posts
    277
    @rick..yeah, the fact level is low on that piece..."don't believe the hype", but i am glad more people have the opportunity to hear about Louie and his work...

Page 5 of 8 FirstFirst 12345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •