Page 1 of 5 12345 LastLast
Results 1 to 20 of 96

Thread: Cutlass build - Group WIP

  1. #1
    Join Date
    Aug 2004
    Location
    Norfolk,Va.
    Posts
    24,982

    Cutlass build - Group WIP


    Support BladeForums!
    Paid memberships don't see ads!
    A recent thread about a cutlass has made some folks consider building one. Lets have a group build project where those interested can build a cutlass and post the results here. It would be great for those with the skills to post as a WIP with pre-steel sketches, in progress photos, and final shots when done. I'll participate in doing that.

    A cutlass can be small ( hand cutlass) or really large. Most were medium size. Shapes varied a lot, too. This leaves a lot of room for artistic interpretation.

    Some basics -
    Cutlass is the French word for "knife like", or "machete like". It is a short broad slashing weapon with a hand guard ( usually cupped). The blade is usually slightly curved, but there are examples from straight blades to very severe curves. The length was kept short to be usable in close combat on ship decks. The mass was fairly high, and the force concentrated on the forward part of the blade, to give chopping and hard slicing the best advantage. It is the smaller descendant of the larger swords of medieval times, particularly the falcion. Other countries and parts of the world developed similar shapes in varying sizes. The ones from Arabia and the orient were often huge.

    So, who like this idea?
    Last edited by Stacy E. Apelt - Bladesmith; 09-28-2016 at 05:13 AM.
    Stacy E.Apelt
    It is better to die fighting evil than to live under it.

  2. #2
    Join Date
    Sep 2015
    Location
    Tennessee
    Posts
    47
    I love it, Now I hope I have time to actually participate!

  3. #3
    Join Date
    Jul 2016
    Location
    Tallahassee, Florida
    Posts
    61
    I can't wait to see them!

  4. #4
    Join Date
    Aug 2004
    Location
    Norfolk,Va.
    Posts
    24,982
    Moved to Shop Talk for more people to see.
    Stacy E.Apelt
    It is better to die fighting evil than to live under it.

  5. #5
    Join Date
    Oct 2012
    Location
    Oxford, MA
    Posts
    1,241

  6. #6
    Join Date
    Feb 2016
    Location
    North GA
    Posts
    149
    Love this idea. I have never made a sword, but always wanted to. I am very busy and not much time for fun projects, but I would love to participate. Hopefully I will be able to keep up and I know this will be a lot of fun and very educational.

  7. #7
    Join Date
    Jan 2016
    Location
    Victoria, TX
    Posts
    164
    Ok so going off your description I drew this.



    Would this qualify? I have some 52100 I can use for it. Will have to figure out how to weld the end up thicker so I can spread it out under a hammer. Bar stock is only 1.5" wide. Is 1/8" thick enough?


    Sent from my iPhone using Tapatalk

  8. #8
    Join Date
    Aug 2004
    Location
    Norfolk,Va.
    Posts
    24,982
    There are several good things about building a cutlass.
    First, it is a very loosely defined shape. Whatever you make will probably fit the genre.
    Second, it does not require a complicated sheath - plain leather or none at all are normal.
    Third, the slight curve will form naturally as you forge. If you do stock removal, just grind in the curve.
    Lastly, it is not a high fit and finish style sword. Those who like the Brut-de-Forge look will be right at home here.

    The guard can be worked from sheet metal (steel or brass), and can be very primitive and still look good. A 24" piece of 6X6 to 12X12 ( or a section of dry tree trunk from the firewood pile) with a depression ground in one end using an angle grinder makes a good swage block. A croquet ball screwed to one side of the same board makes a good working form. Use the flat sides as working surfaces for metal shaping and raising. The hot metal will scorch the wood, but that won't hurt anything.

    I have a big trailer 2-3/4" ball that I got at a yard sale for $1. I ground the 1" shaft on it square and it drops right in the 3/4" hardy hole. This works as a great round hardie tool at a fraction of the cost of a commercial one.
    Stacy E.Apelt
    It is better to die fighting evil than to live under it.

  9. #9
    Join Date
    May 2009
    Location
    Central Louisiana (Pollock)
    Posts
    2,634

  10. #10
    Join Date
    Dec 2011
    Location
    South Baldwin, AL (Across bay from Mobile, AL)
    Posts
    1,181
    I like the idea of the group build. I might not do the work, but I sure will follow the thread and plan to learn a LOTS..... who knows, might just get the time to jump in with a build myself.

    Ken H>

  11. #11
    Join Date
    Jun 2006
    Location
    Rice,Washingtion
    Posts
    5,330
    Oh man Stacy you got me. I have been itchin to do one for awhile and then got reinspired by the post and now this put me over the edge. So yeah I'm game to join the project as I was already planning out the build in my mind on the drive home from work this morning.

    We offer heat treating as well as 15n20.

  12. #12
    Join Date
    Jul 2015
    Location
    Harford County, MD
    Posts
    1,493
    Talk like a pirate day was last week Stacy.

  13. #13
    Join Date
    Aug 2004
    Location
    Norfolk,Va.
    Posts
    24,982
    Arrgh ... I missed it again!

    timos - any hand protecting guard will work. A D-guard, cup guard, basket guard, or something like Ghostmans shape - all will fit the genre.

    Ghostman - looks great. Can't wait to see it in steel.
    Stacy E.Apelt
    It is better to die fighting evil than to live under it.

  14. #14
    Join Date
    Jun 2006
    Location
    Rice,Washingtion
    Posts
    5,330
    So where do we post our pictures of our progress. I have pictures of making the giant Damascus billet.

    We offer heat treating as well as 15n20.

  15. #15
    Join Date
    Mar 2013
    Location
    FPO, AE
    Posts
    163
    This is a great idea...and way beyond my capabilities! I have a personal attachment to the cutlass. The Navy Cutlass is a (optional) part of the Chief Petty Officer's dress uniform.

  16. #16
    Join Date
    Jul 2013
    Location
    BC, Canada
    Posts
    2,414
    I like it.

    I have a big bar of 5160 that is just asking to be a sword. This is definitely outside of my comfort zone, but I will give it a try!
    Last edited by S.Alexander; 09-28-2016 at 10:41 AM.
    Shane

    Check out my work: http://sacustomknives.wordpress.com/

    Instagram: @sa_custom_knives

  17. #17
    Join Date
    Aug 2004
    Location
    Norfolk,Va.
    Posts
    24,982
    Quote Originally Posted by JTknives View Post
    So where do we post our pictures of our progress. I have pictures of making the giant Damascus billet.
    This will be the group build thread, so you can post them here. If you plan on a complete WIP as a final presentation, you can start a separate thread and ask me to put it in the WIP BBQ sticky individually. When we are done with this group build thread, I will also put it in the BBQ.

    Hopefully, this build thread will become the place where a search for "cutlass" sends people.
    Stacy E.Apelt
    It is better to die fighting evil than to live under it.

  18. #18
    Join Date
    Jul 2016
    Location
    Tallahassee, Florida
    Posts
    61
    Here's the one I just made that (I believe) was the inspiration for this WIP thread. It has flaws that Stacy and I discussed in my original build thread, but it is one of my first sword attempts.




  19. #19
    Join Date
    Nov 2013
    Location
    Topeka, KS
    Posts
    1,171
    I've been having ideas in my head about starting one. What thickness of stock do you guys planning using? I was thinking 3/16. Also, you think mild steel would do alright for a guard? I wonder if it would darken very well with an acid etch for some contrast...

  20. #20
    Join Date
    Aug 2004
    Location
    Norfolk,Va.
    Posts
    24,982
    Mild steel or brass guard, 3/16" to 1/4" stock. The thickness depends a lot on your style and if you are forging or grinding. For forging, I would suggest a bar 1" to 1.25" wide but 1/4" thick. For a stock removal blade, 3/16" would be good.
    Stacy E.Apelt
    It is better to die fighting evil than to live under it.

Page 1 of 5 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •