Page 6 of 6 FirstFirst ... 23456
Results 101 to 111 of 111

Thread: Fairly Knives Chat Thread!!!

  1. #101

    Support BladeForums!
    Paid memberships don't see ads!
    Kiridashi Folder! Yeah, buddy!

    Daniel, do you ever work in white paper #2 steel? I don't know much about these things, but I understand this steel can be taken to a whole 'nother level of sharpness. Someday I want to get a blade that will be used for nothing but taking to sick/crazy sharp, even if it takes years to perfect. What's your experience?
    Instagram: @inrangedesign

    #071 #071

  2. #102
    Join Date
    Jan 2011
    Location
    Bayfield, CO 7500 feet elevation
    Posts
    15,399
    Rolf that sounds cool!

    Tony I have a forged tall petty from Japan in white paper #1 and is gets insanely sharp, it is pretty crazy just how sharp it gets. I use a 6000 grit waterstone to finish the edge. It will easily cut a piece of lightly draped phone book paper at the opposite end from where I hold it which is the ultimate test of edge sharpness in my opinion. That sort of edge will cut the letters off of newsprint without cutting through the paper.

    52100 and AEB-L will also get crazy sharp along with Aldo's 1084 and most W2. Each one of those steels is known for having a very fine grain structure with little alloying.

    I lean to the finer grained steels as I'd rather have an edge that is not prone to chipping like something with more carbide structure... but on the other hand have had tremendous results with D2 and other steels that set up with large carbide formations. Heat treat is key...


    I finally took a day off, my first day off since Christmas! We have been getting hammered by the snow back here and I spent the last few evenings shoveling... got my 4runner stuck in the driveway for 2 days but finally dug it out! It's pretty crazy snow load wise, I'm starting to worry about the snow on one side of the shop knocking it over and am going to dig it out next. We drove to Durango, lol no snow in town!

    Everyone have a great evening!
    @danielfairly Instagram!
    www.fairlyknives.com
    DFK Bladeforums Forum
    Craftsmanship Without Compromise DFK ------ Daniel Fairly Knives Connoisseur Grade Cutlery ----------------------- These go to eleven!

  3. #103
    Hi Gang!
    Daniel- Days off are good. But yes, move that snow away from the shop.
    After days of frigid temps, we'll be close to 50 come tomorrow!!
    Have a nice night, ya all!!
    rolf

  4. #104
    Join Date
    Mar 2012
    Location
    Stockton, Ca
    Posts
    6,287
    DFK Ti snow shovel ?

  5. #105
    Thanks D!
    I just spent the last hour putting a very nice edge on hollow-ground AEB-L blade at 15 degrees per side. Now, I will freely admit that I suck at sharpening (but want to get better) and this is easily the sharpest I've ever been able to get. I just took it to the ultra-fine rods on a spyderco sharpmaker, and it literally wipes the hairs of the back of my hand. Fine curly shavings of paper, no problem. Somehow I am now intrigued about "chasing sharp".
    Instagram: @inrangedesign

    #071 #071

  6. #106
    Join Date
    Oct 2010
    Location
    Stockton, CA - We are not responsible for lost or stolen items.
    Posts
    8,676
    Evening guys!

    Don't forget that CTS XHP is another crazy sharp steel. The Stinger Daniel made for me is 52100 and keeps that "sticky sharp" edge very nicely, made it through my duties breaking down a large mule deer this year without a sharpening.

    Sad day, I think I need to sell a knife or two, my short bus has been out of commission since Monday, plus the wife's car was the lucky recipient of a falling bullet from NYE right to the windshield. Fortunately with her dad recovering from his open heart surgery she has been driving his car. So, both cars going in this weekend. I'm 99% sure it's the fuel pump on my truck, PITA job I just don't want to do myself as I don't have access to it from the top and dropping a 30g tank is no fun.

    Hope y'all are making it great!

    -X

  7. #107
    Hey all!
    I'd like to take a moment of silence for this past week, may it rest in peace.... now let's celebrate by having a great weekend!! Now go play in the street.
    Instagram: @inrangedesign

    #071 #071

  8. #108
    Join Date
    Jan 2011
    Location
    Bayfield, CO 7500 feet elevation
    Posts
    15,399
    ^ exactly!

    Yes CTS-XHP too, I have been using it recently and like it a lot. AEB-L is my current favorite all around steel and they both perform similarly.

    What's up guys!
    @danielfairly Instagram!
    www.fairlyknives.com
    DFK Bladeforums Forum
    Craftsmanship Without Compromise DFK ------ Daniel Fairly Knives Connoisseur Grade Cutlery ----------------------- These go to eleven!

  9. #109
    Hi Gang!
    We have some snow coming. No prob!
    Daniel- Did you get the snow away from your shop?
    Have a great weekend!

  10. #110
    Join Date
    Mar 2012
    Location
    Stockton, Ca
    Posts
    6,287
    X, that is a bummer about the cars. I hope you make it through without having to get rid of any DFK's. I stilllllll need to try CTS-XHP.
    TR, watch out for that slippery slope known as Japanese water stones.
    Rolf, sup dawg.

  11. #111
    Hi Kevin! DF and I are working on a Friky/kiridashi folder. Two models. Get in the book, buddy.
    Daniel will do most of the work. He's so nice.
    rolf

Page 6 of 6 FirstFirst ... 23456

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •