Results 1 to 4 of 4

Thread: Sebenza 21 Large - thickness behind the cutting edge?

  1. #1

    Sebenza 21 Large - thickness behind the cutting edge?


    Support BladeForums!
    Paid memberships don't see ads!
    Hello,

    I'm just wondering how thick behind the edge Sebenza 21 should be.
    I have two 21 Large - both were made at early 2016. One is 0,024" (about 0,60mm), and the second one is 0,025" (about 0,64mm) behind the cutting edge.
    But... I've found some discussions about Sebenza's technical specs and most were about 0,020" behind the cutting edge.

    So, is it a badluck to get two 21s that are so thick, or is it just normal in the "newer" sebenza (I mean 2016+ made)?

    For comparison - I measured Paramilitary-2. It's 0,024" behind the cutting edge.

  2. #2
    You have to remember that the knives are hand sharpened and the thickness behind the edge will vary from knife to knife. I'd call that pretty damn good. If you want it a little less, you can always do a little profile and get it to where you want it.
    Last edited by Ajack60; 03-19-2017 at 11:09 AM.
    Arguing with an idiot is like playing chess with a pigeon.
    No matter how good you are, the bird is going to crap on the board and strut around like it won anyway

  3. #3
    Join Date
    Sep 2008
    Location
    USA
    Posts
    5,530
    Really.....??

  4. #4
    Join Date
    Feb 2008
    Location
    The Swamp of Loxahatchee, FL
    Posts
    1,836
    What Ajack60 said-though it never dawned on me to even measure such.
    Last edited by Peter Hartwig; 03-19-2017 at 07:44 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •