Page 1 of 3 123 LastLast
Results 1 to 20 of 46

Thread: MTech knives

  1. #1
    Join Date
    May 2003
    Location
    Bellevue, NE
    Posts
    2,947

    MTech knives


    ADVERTISEMENT
    Anyone have any experience with these knives? Do they make anything other than butterfly knives? Thanks.

  2. #2
    Join Date
    Jan 2005
    Location
    Pirate's Cove / Upstate NY
    Posts
    1,225
    Yes and yes, cheap low quality knives, both butterflies and other knives. The butterflies are a OK start if you don't want to spend $150-$250 on a BM. A better choice would be a Jaguar Butterfly for starting out.

  3. #3
    Join Date
    May 2003
    Location
    Brooklyn
    Posts
    5,949
    How is Vtech, then?

  4. #4
    Join Date
    Jan 2001
    Location
    Joe-Jah, USA
    Posts
    3,281
    Vtech's quality is comparable to CRKT and the like, but what turned me off was some of their knockoff models.

    For instance, their TitanX mimics the overall shape of the Classic Sebenza:

    Pics from moteng.com

    Their Venom looks like a Benchmade/Osborne wannabe:

    pics from moteng.com

    As far a MTech knives are concerned, I believe those are Master Cutlery's animals, ergo, they are rubbish in my opinion. Remember the drama involving them and Mike Turber? They supposedly got a hold of all the BOSS knife designs he was planning to release from the Chinese factory that was making them and began selling them with the MTech name. Then there was the incident with Joy Enterprises, but that's a whole other story.

  5. #5
    Join Date
    May 2003
    Location
    Bellevue, NE
    Posts
    2,947
    M-Tech are BOSS leftovers. I see. I had a Cheetah and that was by far the worst knife I've ever owned. Well thanks a lot people. Now I know what to avoid when it comes to "cheap" butterfly knives. I think I'll just stick to my BM and maybe a MT Dragonfly.

  6. #6
    Join Date
    Oct 2004
    Location
    Ye olde Europe
    Posts
    1,542
    You get what you pay for with M-Tech. $5 will buy you $5 worth of knife. If they could be bothered to use better materials and less clumsy production methods they might actually be worth the money. Get Opinel for $5-10 instead,same price ut inspires more confidence.

    For a more detailed description of non-bali M-Tech check out tests forum,i posted there about M-Tech cheapie i got me just for kicks. After flipping it for quite some time (you know,"inertial opening") it developed a tiny amount of vertical blade play (less than 1 milimeter at the tip). Lock still wouldn't fail which kinda irritates me (my guess was that it was the first thing to fail).

  7. #7
    M-Tech is junk. I bought one of their folders for testing about a year ago. The piece locked up fine, but that's about it. The quality is better than the majority of Chinese knives, but they are still crap.

  8. #8
    Join Date
    Oct 1998
    Location
    Rancho Cucamonga, CA Honolulu & Kona Hawaii
    Posts
    5,456
    The real scumbag behind the whole MTech mess is Victor and Henry Lee.

    If you would like to express your opinion directly with Master Cutlery send a nasty gram to victor@mastercultery.com

  9. #9
    Join Date
    Feb 2005
    Location
    SpydieVille
    Posts
    288
    MTech also has a CRK Mnandi knockoff.

    Kinda tough to reconcile multiple blatant ripoffs.

  10. #10
    Join Date
    Nov 1999
    Location
    Harrow. Ont Canada Eh!
    Posts
    6,651
    Hey Guys..

    They also make a Brian Tighe "Tighe Stick" knockoff...

    All the M-Tech stuff I've seen is garbage...

    Mike..

    Good to see you still on the forums.
    Hope all is well..

    ttyle

    Eric...

  11. #11
    Join Date
    Feb 2005
    Location
    Mason Dixon line off I-83 Tusker User Group #13
    Posts
    18,496
    I have bought several Mtechs at a gas station in MD, one was a total POS, the other is fine for opening quarts of oil etc, cleaning battery posts and what not that I do not want to mess up the blade on my good knives. A step above the Jaguars etc, but on an even keel with the Frost brand from SMKW. Junk basically, but if that's all people can afford, gotta work with what ya got

  12. #12
    The most honest response would be to say that they are similar to many Red Chinese made knives. In my experience they are actually better than most of them. Comparing them to Frost is reasonable comparison, I think.

    I think they are better then Jaguar knives also and Jaguars are made in Taiwan.

    What confuses me sometimes is that I read glowing remarks about some Red Chinese made knives on this forum and this particular brand gets completely panned. It is as though there were political opinions about various importers because the differences in quality don't justify the rhetoric. So take all of this with a grain of salt. Red Chinese knives are currenly a cut above Pakistani knives and the best of them are almost on a par with the Taiwanese made knives. I think they will surpass Taiwan in short order.

    Personally, I hate that the manufacturers have gone to Red China which I consider to be a competitor of the U.S. at best and an enemy at worst. But I understand that Americans have "voted" and want Chinese products. So I guess we might as well hope that the quality, which has improved noticeably, continues to improve.

  13. #13
    Join Date
    Feb 2005
    Location
    Western North Carolina
    Posts
    2,643
    Quote Originally Posted by Cosmic Superchunk
    As far a MTech knives are concerned, I believe those are Master Cutlery's animals, ergo, they are rubbish in my opinion.
    ha. I picked up a Master Cutlery knives a few years ago just to see how bad it really was. It was supposedly designed by Tom Anderson. I tested it out a little. The blade is stamped 440 and would not take an edge. I finally ground an edge onto it with my Dremmell that could shave, but I cut some cardboard and, alas, the edge was no more. So I threw it into a box of junk knives that I've picked up (some literally picked up off the street) and forgot about it.

    Until a few days ago. I'm in the process of moving (in a few months anyway) so I'm going through some crap that has accumulated and getting rid of what I don't need. I came across the box of junk knives and the Master Cutlery was on top. I got it out and flipped it open. It would be a nice design if it had quality materials; and actually, the handle isn't bad, the scales seem to be 410 or something along those lines. And the 440 blade, albeit impossible to sharpen, has a nice shape. The liners are a little thin, but workable. But I decided that I really had no use for the knife, so I started taking it apart for the inner workings (screws, washers, etc). Once I had anything of possible vaule off the knife I sat with the blade in my hand. "hmmm," I thought, "i wonder..." So I did a bare hand flex test. Yes, I was easily able to bend the blade with my hands... so much for heat treating.

    Where this knife really failed, apart from the lacking heat treat, was the fit and finish department. But since I bought the knife just to see how bad it was, I can't really complain there. Out of the box it was dull as a baby's ass and had so much blade play I was suprised it held together. Despite the blade play, it locked up pretty tight; but I was able to bend the liner lock with some backwards pressure on the blade with the handle locked in a vice.

    On its behalf, I will say that it was an extremely enjoyable knife to destroy.

  14. #14
    Join Date
    Sep 2004
    Location
    heart/mind ..Molokai---body..... Redmond,Oregon
    Posts
    275
    i have their tactical fixed blade with mini knife in micarta handle kydex sheath as for as cheap knives go this one takes an edge holds it and i'm running it thru the paces as a go to survival blade
    tyrant

  15. #15
    mtech blows. i used to get them in a gas station in suitcase city-the hood of all hoods, in tampa. not a smart place to sell slash 'n' dash knives, but thats just my $.02 their butterflies aren't even that great. get a jaguar if you're looking for something similar. all the mtech knives were good for, besides providing murder weapons to the peewee gangbangers, is to cannibalize for parts such as thumbstuds and whatnot.

  16. #16
    Join Date
    Jul 2005
    Location
    Walking the razor's edge
    Posts
    2,027
    For the price of an MTech that rips other people off and has unrealible quality, you can by a knife like a Byrd.

  17. #17
    Join Date
    Feb 2006
    Location
    Phoenix
    Posts
    679
    The blades that I have handled and used of theirs were not worth purchasing. I would rather have a $7 Mora or a $20 SAK anyday.

  18. #18
    Join Date
    Jan 2005
    Location
    Peoples Republik of California
    Posts
    6,768
    What I find most unusual though is how Mtech consistantly seems to have knives "designed" by American makers.
    I have seen several of these ads , for instance in the Dec 06 Blade there is an ad for a "Strike 3 and Red Eye" designed by "Wally Hayes , Master Bladesmith of the American Bladesmith Society".

    Admitidly the Strike 3 has an intersting blade shape , the Red Eye though with the addition of a red LED is pure frickin cheese, what might one ask is the purpose of a red LED on the top of the scales ?

    I will say they have some interesting designs , too bad many of them are not thier own.

    A while back I bought a Mtech karambit out of curiosity and , well.. other than the cheapass steel it is not too awful bad of a knife. Lockup is solid and it feels good in the hand.

    Now here is the kicker that has me damn curious. I have several kit knives and they all use the same indentical pivot screw as the Mtech I have , I have also seen this pivot on other knives in Blade and on various sites , which makes me wonder who gets what from where ? I know the kits I buy are made in China even though they do not go out of thier way to provide that info , I'm wondering if the same factory that produces Mtech , produces these kit knives....

    There is a lot of knocking on Chinese knives here (and perhaps rightly so) but whats the point overall ? Nearly everything in every PC we use , from the moniter you are viewing this page on , to the keyboard I am typing on , is made in China. Your cell phone , your toaster , your TV , many of the parts in your "American made" car/truck the list is long and heavy.

    I recall when I was young that my folks and elders rule of thumb was never buy anything made in Japan because it was junk (hence the term rice burner i.e.) and many of us know now that Japan produces some of the finest knives on the planet and has for centuries.
    See my anology ?

    Long story short , all of us are better served buying quality items , China is now producing quality knives such as the Byrd line by Spyderco , the other day I got my Marbles slipjoint in the mail , made in China , can ya believe it !!?? But I tell ya what , that is one Hell of a fine slipjoint , the blades are all razor sharp out the box , the bone stag is actually beautiful and the F&F is outstanding , a fantastic bargain for $20.and of course I polished off the "China" from the blade at least that way I can pretend.

  19. #19
    Join Date
    Jul 2005
    Location
    Pasadena, California
    Posts
    311
    after looking at this thread i decided to take a look at some of thier current offerings. (havent done so in ages)

    heres the fun i had:

    they are actually ripping off dork ops !
    Strat

    and a multitude of kershaw onions including:
    boa
    bump


    but this one takes the cake! i was actually speechless
    brace yourself
    sng

  20. #20
    Join Date
    Dec 2004
    Location
    Harrisonburg Va.
    Posts
    1,387
    Hey, for 16.00 you can get a 440c Strider! It is amazing, the "nads" on this Co. I'm always shocked at the rip-offs they put out. Depressed is the real feeling I get.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •