Page 1 of 2 12 LastLast
Results 1 to 20 of 38

Thread: The best belt sanders for knife making.

  1. #1
    Join Date
    Mar 2000
    Location
    Québec,Canada
    Posts
    18

    Question The best belt sanders for knife making.


    ADVERTISEMENT
    Hy guys. I,m looking to by my self a chrismas present. I would like to know what kind of belt sander i should by and what are your opinions on bader grinders,Burking or if any other.I,ve bein using`a regular 4" belt sander whith flat disc on the side and i think ther's to much restriction. Not enough space to work my blades. Can someone give me advice according to there experience.
    I would like to get the right machine to do the job.

  2. #2
    Join Date
    May 2006
    Location
    Elizabethtown, kentucky
    Posts
    587
    hey man there are all kinds of good info here you just gotta find it :> try going to the search function go to the advanced search function then search for belt grinders in the thread titles this will return about 1 billion post to search through but when you are done you will have just about every ones opinion on belt grinders , belts , platens and the like. hope this helps
    doc silas

  3. #3
    Join Date
    Mar 2000
    Location
    Québec,Canada
    Posts
    18
    Thanks for the quick responce all try looking.New on this site.

  4. #4
    Are you looking for total versatility? Do you do either flat or hollow grinding or both? Do you have budget constraints?

    Some of the American manufacturers may not ship to Canada. That will be something that may narrow your search.

    Bader III, KMG (Beaumont Metalworks), Burrking, Hardcore are top end grinders. It thus becomes a question of how you wish to option them, such as accessories and motor choice. My personal choice would be KMG, followed by Bader. This is not speaking negatively about the other two at all. It is a matter of "drive configuration" preference and ease of changeover of different tooling.

    If you search well, you will find a post here in Shoptalk that shows a grinder being produced in BC. It is new and not one familiar to this forum.

    More information about your intent will help us to offer better advice.
    Last edited by fitzo; 12-12-2006 at 12:27 PM.

  5. #5
    Join Date
    Dec 2005
    Location
    Montreal
    Posts
    57

    Louis

    I have been working on getting my grinder together for the past 2-3 months. I am a Montrealer as well and it is not as easy for us as it is for the guys over the border, will PM you my cell, give me a call if you'd like and I'd be happy to pass on what I have learned. It could probably save you some time and trouble.

    Henrik

  6. #6
    Hello, Henrik! Did you get anywhere in your search for wheels?

  7. #7
    Join Date
    Dec 2005
    Location
    Montreal
    Posts
    57

    Hi Mike

    Yes I did.

    I spoke to Norm Coote who was very helpful. I asked him if he could make me the wheels I need and he said no problem (he actually offered me to order the wheels for me from Beaumont and ship them to Canada. I find this amazing since he himself is in the bussiness of making grinders). I ordered the wheels from him as well as a 10" contact wheel and the shafts.

    It all should arrive in a week or two.

    Henrik

  8. #8
    I am happy to hear that for you, Henrik! Perhaps you can save Louis some of the frustration you have experienced. Please let us know how your project works out!

    Regards...

  9. #9
    Jantz , is now selling tracking wheels, rubber bound wheels , etc, for building your own grinder. a new catalog also, George

  10. #10
    Join Date
    Aug 2005
    Location
    St. Petersburg, FL
    Posts
    20,845
    KMG variable speed, baby!!!!!

  11. #11
    Join Date
    Mar 2000
    Location
    Québec,Canada
    Posts
    18
    Hello what i here and i see is the machine that i whant is the KMG and its the one i will try to get. I have contacted the company and like you say the will not deliver to canada. So i'm looking for other options.If i knew someone in the states who could get it and then send it by fedex or somthing like that it would be esyer for me . I can use my visa to purchas it.I saw the BIII that looks alote like the KMG but dont know much about it.

  12. #12
    Join Date
    Mar 2006
    Location
    Newbury Park, CA
    Posts
    2,205
    I have and like the BIII. One advantage is that it's main mounting (for a table) is the mount on the motor. The machine itself mounts to the motor's C-face flange. I find it eloquent--plus I don't like belts and pulleys which this eliminates.

    Here is a picture of my set up as it sits today. The grinder is mounted on an 'angle plate' which means the whole thing can tilt 90-degrees to the left.

    This is good because it allows you to run your belt horizontally. You can set up tool arms for convenient small-wheel profile Grinding as shown, or do other neat things, etc.
    This means I don't need a separate machine for those operations.

    You'll have a harder time tilting a KMG, as nice as that machine is.
    Attached Images Attached Images

  13. #13
    The Bader III is a very nice machine, Louis. It is quite popular. The company has been well established for many years and enjoys a very good reputation amongst the knifemaking community as well as the industrial world. The people at Bader have been very easy to deal with for many years. I would give them a call and talk to them, also. If Dan Johnson is still running the place, you won't find a nicer man.

    Here is the website:

    http://www.stephenbader.com/

  14. #14
    Join Date
    Mar 2006
    Location
    Newbury Park, CA
    Posts
    2,205
    Quote Originally Posted by fitzo View Post
    The Bader III is a very nice machine, Louis. It is quite popular. The company has been well established for many years and enjoys a very good reputation amongst the knifemaking community as well as the industrial world. The people at Bader have been very easy to deal with for many years. I would give them a call and talk to them, also. If Dan Johnson is still running the place, you won't find a nicer man.

    Here is the website:

    http://www.stephenbader.com/
    I have to agree, Dan has always been a good guy to me. He's helpful and will offer good advice.
    I make my own grinders now (have a few different 2x72 machines). They're all based (read:copied) from the Bader design and I buy their wheels/idlers, etc. for those projects.

  15. #15
    Join Date
    Jan 2004
    Location
    North Bay, Ont
    Posts
    108
    Louis:

    As a Candian maker, you really need to look at Bee grinders - they are out of London, Ont- I have had one for 5 years and am entirely happy with mine. They can be had in variable speed, for a few dollars more - if your allowance allows, I would strongly recommend.
    Check with Jeff Diotte at Downie Knife supply (his links are on the CKG website).

    Mike

  16. #16
    Join Date
    Mar 2006
    Location
    Newbury Park, CA
    Posts
    2,205
    ....Just for fun,
    Here is one of my Bader copies making up part of a 36-inch 2x72 'surface grinder. (Until now there have been only about 3 people that have even seen this thing.)
    The bottom half of the machine is an old Hanchett grinder. The entire top half, including third stage, was built here. There are two 8x18 inch magnetic chucks on a giant tilting-sine apparatus. It's designed for 'cleaning up' sword-length forgings with forged-in distal tapers.
    The mag-chuck platform tilts so you could do edge-bevels, but I have a better set up for that.
    This unit is now all-hydraulic-automatic drive with fresh electronics, etc.
    ....Something different....kind of chunky, but it works.
    Attached Images Attached Images

  17. #17
    Impressive piece of machine building, Joe! Thanks for sharing.

  18. #18
    Join Date
    Jul 2000
    Location
    The foothills east of Yuma, AZ
    Posts
    1,494
    Quote Originally Posted by fitzo View Post
    ...
    If you search well, you will find a post here in Shoptalk that shows a grinder being produced in BC. It is new and not one familiar to this forum.

    ...
    http://www.suremak.com/grinder.html

  19. #19
    Join Date
    Feb 2000
    Location
    Cremona, Alberta, Canada
    Posts
    1,865
    I agree that you should be looking at the Bee grinder. Jeff Diotte sells them in Ontario and we sell them in Alberta. Taxes vs shipping. It is a very nice grinder available in a wide variety of configurations. It has been available for many years - it is not made in someones gargage - and it is supplied complete and reliable.

    Rob!

  20. #20
    Join Date
    Mar 2000
    Location
    Québec,Canada
    Posts
    18
    I saw that suremak grinder i think it looks a bit weak.I will try to get more info on the BIII and i think janz suplie holds that machine. I have ordered stuff from them and ther is no problem regarding the export. Thanks again guys.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •