Page 1 of 23 1234511 ... LastLast
Results 1 to 20 of 455

Thread: some projects

  1. #1
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846

    some projects


    Support BladeForums!
    Paid memberships don't see ads!
    Here's some of my projects in progress (not all of them)



    On top is the new pattern necker. I'll have completed photos up once the sheath tweaking is done. This one is an order. It has a great full round handle that's super comfortable. Clocks in at 7 inches overall with a 3 inch scandi ground blade. This is the one I was talking about before being the "whittler" to go with a larger leuku pattern as a bushcraft set. Of course, it's a fine bird and trout, as well. It's pretty much done except for a bit more stropping.

    Second is an argentine lignum vitae handled bushcrafter, and below that is one in ipe, both are also orders. Both also need about a half hour of final work on the handles. they are rough sanded at 400 grit right now. I need to remove a few lingering scratches and give them a solid unidirectional final snading. Then bluing and oiling and they are done. Koyote girl has them in the sheath pile for initial water forming.







    Some other stuff- top of the first photo is a through tang leuku pattern bushcrafter that's sitting around because of orders. I'll get that one finished up here are soon as I get the ordered through tang traditional leukus ready. Just do a 2 day set of getting a half dozen through tangs set up.

    A third spanish dirk, done forging and rough grinding, I have to finalize the tang and drill holes, take the whole thing down to 320 grit and heat treat. I leave my tipe blunt like that and then work the final shape after heat treating. That one is a 12 inch blade.

    There's a nicholson file single edged dagger, it's on 400 grit and may be a while before it is done, i'm trying to mirror it out and match it up with a guard and butt of 316 stainless from some 1/4 plate stock I have.

    A little bird and trout is in there, it's all done except I need to redo the rear pin hole, which is fine since I want to take it out to 3/16 for a thin lanyard hole as well. it's not visible but has some nice spine filing and is a scandi grind finished out to 600. I'll buff that out some or maybe just push on to 800 and 1000.

    There's also a big rough forged kindjal style blade in 5160. It's got a few more forge trips to go. 18 inch blade, and I'm going to work it out as a full tang style.

  2. #2
    Join Date
    Aug 2008
    Location
    Rockies
    Posts
    3,176
    Lookin' good Christof!

    Hmmm...bird and trout...

  3. #3
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    I love bird and trout knives! At one time I wanted to make the pocket nessie into my "art knife", now it's one of the artistic variations on the bird and trout. There's so much that can be done within the basic idea- the bird and trout is one of those real classic American knives- with the bowie, drop point hunter, green river, and stockman slipjoint.

    It's a great canvas to work with, and probably, honestly, when you get right down to it, the single most useful small knife you can own. A puukko makes a fine B&T, as do the small nessies, if your style goes that way.

    To me it's the Gentleman's EDC, along with the finer (in profile) Wharnies. I have tons of work to do, and need to keep the orders coming in, but I seem to always have a little B&T project on my desk for hand rubbing while I'm messing around at the computer or filing receipts.

    I do a fair number of them in scandi but I still think a really thin convex is the best.

  4. #4
    Join Date
    Aug 2008
    Location
    Rockies
    Posts
    3,176
    Quote Originally Posted by koyote View Post

    honestly, when you get right down to it, the single most useful small knife you can own.

    Too true. It's funny, I have several smaller knives, and one that is called a Bird & Trout, but
    I don't know that I've got a really good B&T. Need to rectify that since I like to angle for the
    finned beasties. I like the fine point you've got on that one. I think a B&T needs a bit of point.
    Of course, I'm also thinking about a nice Wharnie too....
    Last edited by Rotte; 01-04-2009 at 12:32 AM.

  5. #5
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    A real good B&T is hard to spec out. I, for example, and more into catfish and rabbit - so a bit heavier and broader blade than is ideal for dove and small fly fish type of knife. I'd also angle more towards a bit of clip or drop/spear on the catfish and bunny blade, while the fly man might tend towards a straight spine or trailing point, even. A dedicated bunny/squirrel/coon hunter would end up better off with the pocket nessie, IMO- and the extrem drop point two finger neckers I make have been used to rapidly take care of field dressing and packing out all the way up to whitetail deer size!

    Incidentally, the wharnie is coming along. I've got a good forged rough and am messing with handle layouts.
    Last edited by koyote; 01-04-2009 at 12:41 AM.

  6. #6
    Join Date
    Aug 2008
    Location
    Rockies
    Posts
    3,176
    No rush; I think I've got something with an edge around here.

    The more I look at that Bird and Trout the better I like it. What's the blade width? I think narrow is good here. Gives it some elegance.

  7. #7
    Join Date
    Feb 2007
    Location
    Ontario, Canada
    Posts
    9,693
    Looking good Christof!

  8. #8
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    hair under 3/4. rounding the butt a bit for comfort and she's got ipe drying on her now

  9. #9
    Join Date
    Mar 2006
    Location
    Santa Cruz mtns. CA.
    Posts
    10,024
    great looking stuff christof... i really like the looks of that necker...

  10. #10
    Join Date
    Nov 2005
    Location
    land of the lost
    Posts
    11,126
    Those look great. I too like the bird and trout pattern. I am loving your Spanish Dirk too. Your blades look very classy Christof, and have a flavor all their own. The leatherwork is fantastic too.

  11. #11
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    Quote Originally Posted by j williams View Post
    Those look great. I too like the bird and trout pattern. I am loving your Spanish Dirk too. Your blades look very classy Christof, and have a flavor all their own. The leatherwork is fantastic too.
    Well, I hope you like the bird and trout

  12. #12
    Join Date
    Jan 2008
    Location
    Cincinnati
    Posts
    3,346
    the necker on top looks great, as do the others.

  13. #13
    Join Date
    Nov 2005
    Location
    land of the lost
    Posts
    11,126
    Quote Originally Posted by koyote View Post
    Well, I hope you like the bird and trout


    It is a fantastic looking knife, and I cant wait to put some work in with one.

  14. #14
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    WORST PHOTOS EVER.

    The knife has a tip, I promise. it was raining hard and I'm an outdoor photographer, so.... Anyway, it's 1000 times better in person. Forged 1084, .23 to .16ish distal taper, flat grind, convex final. Flax cord underwrap with 550 over. This is the evolution of my shop knife. It's a fine piece to hold.




  15. #15
    Join Date
    Nov 2005
    Location
    land of the lost
    Posts
    11,126
    Wow!! I really like that one Christof! Good stuff!!

  16. #16
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    Hey, Jake:

    (scratches in first pic are grease streaks. it's 800 grit and buffed finish.)









    Tiny, 3 inch blade, VERY FINE EDGE. this is a bird and trout only kind of knife. no batoning. NO BATONING. it's like a 6 degree scandi on each side with a light convex final stropped in. my fingers say it's dangerous sharp.

  17. #17
    Join Date
    Nov 2005
    Location
    land of the lost
    Posts
    11,126
    Man what a great quail, and fish knife that will make. I am sure it will see alot of field use on the birds and fish. He will love it. I love it. Very very good work, I cant wait to get some time with it. I am going Quail hunting next week, you think it will be here in time for a review on a hunt?

    J

  18. #18
    Join Date
    Mar 2007
    Location
    North of Harmon Junction, Nevada
    Posts
    5,846
    PM me your address and we can make it happen

  19. #19
    Join Date
    Nov 2005
    Location
    land of the lost
    Posts
    11,126
    Sweeeeeet, PM sent brotha!

  20. #20
    Join Date
    Oct 2005
    Location
    MN
    Posts
    7,442
    Very very nice.
    Someday is today. Make your life count; don't just count the days.
    Proud Supporter of JK knives #2

Page 1 of 23 1234511 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •