Start see here - http://www.bladeforums.com/forums/sh...665-Model-Name
Unfortunately this topic has uninformative title, so I created a new topic.
My modest collection of pattern #5818:
Small Lockback ( #2 )
Cartridge Buddy Single Blade Lockback ( #C1 )
Celluloid Abalone Single Blade Lockback ( #CL5812 )
Carbon Gents Lockback ( #61 )
Yello-Jaket Single Blade Lockback ( #715Y )
Camillus Duralens Gambler Lockback ( #110-? )
Western Duralens Gambler Lockback ( #WD111 )
Post your Small Lockbacks pictures here
I have a couple of Sears/Craftsman small lockbacks. The smaller is a three inch model number 95414 (with box) and the other is a 3 1/2 inch model number 95114. The 95224 is marked 60th Anniversary. Not sure if either belong in this thread, not even sure if they are Camillus made.
The upper knife is very similar to #2
Question for Phil, and other experts:
Shown above Gambler "Ten of hearts" have tang is marked by etching - this is a real Camillus worked or remarked?
Last edited by Vit_213; 01-16-2012 at 12:18 AM.
During the last years that Camillus was open, it was common practice to etch the brand on the tangs. This was frequently done on blades that had another customer's brand ground off. For example-After Schrade closed in 2004 any blades remaining at the Camillus factory had the "SCHRADE" tang stamp removed and the "CamilluS" name etched in its place. Nothing was thrown away at Camillus.
Thank you, Tom!
I have left to find another 3 pieces for a Royal Flush
Nice deck of cards, I have two unopened decks.
SilverSword Marshall #864 (marked 42)
Was purchased for $ 7, his shipping was worth more
This pattern #5761?
Very nice almost 40 year old knife. Do you have many Westerns knives to go with your cards?
You have an early Silver Sword knife. This model was introduced as the model #42 then when more knives were added to the Silver Sword line the number was changed to #864. The model #42 was packaged in a silver box with a black molded platform. Each knife came with a small black cloth pouch bearing the Silver Sword crossed swords logo. During the 1980's the model #42/864 was advertised in PLAYBOY Magazine.
Thank you, Tom!
Your answers will give us a lot of knowledge.
Unfortunately, the knife came to me without pouch and box.
Probably I expressed it incorrectly. Maybe should write "I have left to buy" (sorry for my english ).
Now I have two Gambler knives. Both came with a deck of cards, but without the box.
My collection is supplemented by two small knife
Camillus Rimfire Classic 22LR-5
Nice lot of drop points Vit... I really like the pattern.
I carry one all the time, though not from the Camillus family.
H A L
It's a Rough Rider 1021 ...
H A L
Yes both of the knives the number 95114 and the 95224 where made at Camillus. I worked at Camillus for 38 years.
Thomas, thank you for the information on my knives. I have heard that if the knife has 5 numbers it is Camillus made.
There are currently 1 users browsing this thread. (0 members and 1 guests)