SHSH, Boss jack, AK47,GW,HS,NukeEDC,Boss street,NMSFNO

[fbusmc]

Sales thread closed and condensed into the following thread
http://www.bladeforums.com/forums/sh...9#post10440829

[JDieseljoe69]

I will take this one
SCrap YARD DOG Father Tanker gray $300
Thanks

[sar5]

Wrong post sorry

[onlooker96]

How thick are your FFBM knives?

[fbusmc]

ok, I was just informed that the FFBMs are actually about .320 thick

[bm11]

Im' thinking all FFBMs are about .27-.29, although I dont' have a mic to measure.

I'm certainly no expert, but I have been researching the FBM's a ton, and I'm pretty sure the CGFBM's are .25 or so, the FBM LE's/etc in a saber grind are .27, and the FFBM's are .310.

[Maverick888]

PM sent on the Mutt.

[fbusmc]

Sus Scrofa is SPF to mwmccormick

[sinjans]

ok again requesting the blade thickness on the BS.

[fbusmc]

I'm thinking it is .187 on the Boss street, but it could be .20 I don't have a micrometer if any of my HOG buddies want to chime in here it would be appreciated

[ifuleu]

I will take 0.32" FFBM w/ hand smoothed tiger hide on Sage $590.
Looks like it has perpetrator tip from the photo?

[Major Kong]

If the second from the top or the bottom FFBM ever go on sale please give me a 5 minute head start

[oohhaann]

is the sar-4 .187 or .22? unsharpened? thank you

[fbusmc]

the Sar 3 is .22 a very nice feel

[shaving sharp]

PM sent on DC ASH 1

[wolfdad]

I will take the 5 1/2 inch Hogue. pm inbound.

[Mgurwicz]

seconds on the 4th down FFBM

[fbusmc]

FFBM tigerhide and serrations SPF to Lin, Sus Scrofa SPF, Hogue 7" SPF, FFBM orange/black sold,

[fbusmc]

As far as the SAR 4 goes, All busse blades are sharpened from the factory. the knife is new and is unused. I'm pretty sure it is .22 thick

[44magnumb]

email sent regarding Saber Grind SFNO Satin blade with "storm" G10 grips