Passaround - ZT 0121 and ZT 0100 Fixed blades

[Morrow]

Thomas (Director of Sales and Marketing for Kai USA ) sent me these knives for a passaround. Please thank him for his continued support of this site by providing these great knives for us to test drive.



ZT 0121

Specs:

This fixed-blade military knife was designed in cooperation with the military knife experts at Strider. For exceptional strength and wear resistance, the laser-machined blade is S30V stainless steel with Tungsten DLC high-performance coating. The full-tang blade is even sturdy enough for prying and punching tasks. The Ranger Green G-10 handles are 3-D machined for a superior grip in all weather conditions. Plus, the aggressive arc at the front of the handle and notched thump ramp provide an even more secure grip. A cord cutter is built into the choil of the blade and the handle is drilled to accept a lanyard. Includes Kydex® sheath with MOLLE compatible, multi-carry configuration.

SPECIFICATIONS:

Made in the USA
Steel: S30V stainless-steel with Tungsten DLC coating
Handle: 3D machined G-10, matte black
Blade Length: 4.25 in. (10.8 cm)
Closed Length: Fixed blade
Overall Length: 8 in. (20.3 cm)
Weight: 9.2 oz.

ZT 0100

This fixed-blade military knife features an innovative recurve blade designed for multi-tasking versatility, minimal mass, and maximum performance. This blade design provides ideal leverage in tough cutting situations and a precisely centered point to handle piercing tasks with ease. The blade is built of CPM3V tool steel with black Tungsten DLC (Diamond Like Carbon) non-reflective coating. CPM3V tool steel provides maximum resistance to breaking and chipping and is highly wear resistant. It’s built for impact toughness and to perform under the harshest field conditions.

SPECIFICATIONS:

Made in the USA
Steel: CPM3V tool-steel with Tungsten DLC coating
Handle: 3D machined G-10, matte black
Blade Length: 5.75 in. (13.6 cm), .190 in. thick
Closed Length: Fixed blade
Overall Length: 10.5 in. (26.7 cm)
Weight: 11.4 oz.


Standard Rules apply:

Special Note: You must be a member for at least 6 months AND be some level of paying membership.

If you lose the knife, or it gets lost going from you to the next person, you'll need to come up with $450 to cover the replacement cost.

By signing up or by participating in any way with this passaround you agree to meet and abide by all of the following rules, terms and conditions:

You must be an adult over 18 years of age and reside in the U.S.A. to sign up or participate in this passaround.

It is your responsibility to ensure that the passaround knife is used, carried and/or possessed in a safe and lawful manner from the time that it is delivered to you or your address until you mail it to the next participant.
You must agree to and abide by all of the Bladeforums.com passaround rules.

See detailed rules here:

http://www.bladeforums.com/forums/sh...or-Passarounds

Also read and understand the following:

This comprises the "Shrink Wrap Warranty" for the passaround knife that is described elsewhere in this message. By participating in the passaround you agree and warrant that:

- US Addresses only! No PO Boxes!

- You are 18 or over and considered an adult under your jurisdiction.

- You can legally posses, carry, ship and receive the passaround knife.

- You take full responsibility for this knife and its use while in your possession.

- That you are participating in research and your comments and conversations about the passaround knife are limited to BladeForums.

Keep the passaround up to 1 week and PERSONALLY* send it to the next person by U.S.P.S. Priority Mail, delivery conformation, insured.

This is your responsibility, please do not rely on anyone else to mail it for you. No excuses.

Priority mail with delivery confirmation and $450 of insurance is SOP. You may also choose to ship via UPS or FedEx, as long as the above insurance amount is met.

When you receive the passaround please post in this thread as soon as possible so that we can keep track of it, also note the condition of the knife as it is received. Please report any discrepancies as to the description of the previous participant. In such case, please call or e-mail me, and I will determine if the knife should be sent back Please post when you send it on to the next person.

After the knife passes hands, each person needs to verify all contents were received and their condition.

And, please, post a review , in this Thread.

First 10 people:

--------------------
To SIGNUP send me:

Forum name
Email
Real Name
Address
Phone

----------------------

The List:


1. mebladesharp
2. BogSig
3. SpyderPhreak
4. Planterz
5. adamrockcrawler
6. Dewberry
7. chivilryman2
8. ShooterMike66
9. jwolf90
10.

[mebladesharp]

Im in! Pm sent.

[Morrow]

Im in! Pm sent.

I got your info. You are good to go.

[BobSig]

Im in! Just got a paying membership for the pass around. Sending info now.

[Morrow]

Im in! Just got a paying membership for the pass around. Sending info now.

I got your info. Please update your user group by following this link.

http://www.bladeforums.com/forums/pr...editusergroups

[SpyderPhreak]

I'm in!!! You should have my info.

[BobSig]

Updated. Thanks for providing the link.

[Morrow]

Let's go...these knives are brand new and looking for some action.

[BobSig]

I am getting impatient, I want to play with the knives!

[Rapt_up]

I would but I'm not a member for 6 months... I'm considering buying 0100... I want to try the 3v...

*sigh.... waiting impatiently...

[Morrow]

I would but I'm not a member for 6 months... I'm considering buying 0100... I want to try the 3v...

*sigh.... waiting impatiently...

Sadly, you being in Canada would also be a problem.

[Rapt_up]

Sadly, you being in Canada would also be a problem.

Bummer...

[BobSig]

I thought there would be more takers on this

[Planterz]

I'll play. You've got my info, Morrow.

[adamrockcrawler]

Ah heck why? I am on some other the passarounds you are doing Morrow but if I can sign onto this one as well that would be cool. You may have my info but I will send it at any right.

I've been intrigued by 3v but never had a chance to try it out.

[sticktodrum]

I'd love to jump in on this, as I've been gearing to do blade reviews and featurettes for my YT channel, but alas, I just got here. Perhaps next time... *tear*

[Dewberry]

im in,
i know im not a paid member but im going to go buy one right after I enter this message and after i buy it ill send my info to morrow

ok i updated my membership

[SpyderPhreak]

By my count, that means we just need one more to get this one going!

[Dewberry]

By my count, that means we just need one more to get this one going!

sounds good to me, this is my first pass around so im pretty excited about these knives

[BobSig]

By my count, that means we just need one more to get this one going!

Sadly I think we need 3 more. 2 of the above posters were not able to join the passaround.

Dewberry - this is also my first passaround and I also got a paid membership to join. I am looking forward to it