Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Has anyone grinded down their obnoxious JYD pocket clip?

  1. #1
    Join Date
    Oct 2011
    Location
    New Jersey
    Posts
    904

    Has anyone grinded down their obnoxious JYD pocket clip?


    ADVERTISEMENT
    The title pretty much says it all, but let me sum it up for ya.

    I recently bought a stainless steel JYD from the forum knife exchange. Seeing that this is the smaller than the JYD 2, I think that if I acquire a new pocket clip I might EDC it.
    I contacted STR about a new titanium clip, and he recommended that I grind down the clip to a shape that I would like more before buying a new clip.

    Has anyone ever grinded away at the pocket clip before? If so, could you please post pics?

    I realize that I will need to grind around the holes in the clip, so I think it will still be a rather wide clip, but I think it will be better then the stock clip. But I am curious to see if anyone has done this before.


    Thanks in advance,
    -orangish ducktape

  2. #2
    Join Date
    Feb 2012
    Location
    Oregon
    Posts
    336
    I've seen some people do it to round it out a bit. I think there was even a thread on it awhile back.

  3. #3
    Ya I just got one from Kershawguy about 3 hours ago and this has to be about the ugliest mall ninja flea market junk I've seen on a otherwise killer knife.
    I will order a generic one and tap for a tip up carry but till then here is what I did.



    I just used a angle grinder with a 3in wheel and some bumper black I had laying around. I may have trimmed to much from the end when the paint has dried a little more I'll try it in my pocket

  4. #4
    Join Date
    Dec 2007
    Location
    michigan
    Posts
    1,664
    I drilled and tapped the other end of mine and put a benchmade clip on it for tip up carry. It would have been better with a carbide drill bit and a drillpress but I made it work, so much better now.

  5. #5
    Join Date
    Oct 2011
    Location
    New Jersey
    Posts
    904
    Quote Originally Posted by mc556 View Post
    Ya I just got one from Kershawguy about 3 hours ago and this has to be about the ugliest mall ninja flea market junk I've seen on a otherwise killer knife.
    I will order a generic one and tap for a tip up carry but till then here is what I did.



    I just used a angle grinder with a 3in wheel and some bumper black I had laying around. I may have trimmed to much from the end when the paint has dried a little more I'll try it in my pocket
    This looks to be almost exactly what I want to do.

    Quote Originally Posted by thebrain View Post
    I drilled and tapped the other end of mine and put a benchmade clip on it for tip up carry. It would have been better with a carbide drill bit and a drillpress but I made it work, so much better now.
    I hope to drill and tap my own holes one day, but since the handle is solid stainless steel, I won't be able to get a nice clean holes without a drill press.

    -orangish ducktape

  6. #6
    Join Date
    Dec 2011
    Location
    Cascadia
    Posts
    1,254
    I've always thought they looked goofy on the JYD. MC556 that is exactly how I wanted to have mine ground! I've always thought the clip was the only part of the JYD that wasn't great. The SG2 with an STR clip is one of my favorites. The gothic style clip actually looks really nice on some of the Galyean Pros though but doesn't seem to translate well to a boring G10 handle and not a lot better on the rivet style handle.

    Here is a pro model where the clip really fits and looks incredible.

  7. #7
    Join Date
    Oct 2011
    Location
    New Jersey
    Posts
    904
    Quote Originally Posted by oregonknifenerd View Post
    I've always thought they looked goofy on the JYD. MC556 that is exactly how I wanted to have mine ground! I've always thought the clip was the only part of the JYD that wasn't great. The SG2 with an STR clip is one of my favorites. The gothic style clip actually looks really nice on some of the Galyean Pros though but doesn't seem to translate well to a boring G10 handle and not a lot better on the rivet style handle.

    Here is a pro model where the clip really fits and looks incredible.
    I completely agree....that clip looks very nice on Mr. Galyean's pro model.

    -orangish ducktape

  8. #8
    I think the pocket clip Tim used on the Pro Series JYD is much more appealing.


  9. #9
    His customs are art but these Kershaws are working knives IMO and I would much rather have the clip on the Pro Series above. I will enjoy this knife though it's about to get a workout starting tomorrow.

  10. #10
    One more open. The bumper paint has a little texture and looks better in person the flash on my camera phone makes it stand out more.

  11. #11
    I have one I ground down with a belt grinder. Focus on the horns and once you get those worked down to where they suit you... you can focus on reshaping the rest if you choose. For me just rounding off the horns made it work-able. It isn't hard, just make sure that when you get done with the grinder that you take some sand paper and work the sharp edges down to smooth and rounded again, otherwise, you will tear up your pocket and possibly end up with some scratches on your hand.

  12. #12
    Join Date
    Sep 2004
    Location
    Dana Point, Ca.
    Posts
    265
    That looks good. Much better than the Klingon pocket clip.

  13. #13
    Here is my clip, I just used a bench grinder, Took about 2 minutes.

  14. #14
    Join Date
    Feb 2008
    Location
    Bay Area, CA
    Posts
    223

  15. #15
    Join Date
    Jul 2011
    Location
    LI, NY
    Posts
    4,571
    I got a titanium one that I bent into shape, with which I replaced the original.


  16. #16
    Join Date
    Oct 2011
    Location
    New Jersey
    Posts
    904
    Quote Originally Posted by gooeytek View Post
    I got a titanium one that I bent into shape, with which I replaced the original.

    Where did you get the titanium clip?

  17. #17
    Join Date
    Jan 2009
    Location
    in a river going upstream
    Posts
    2,461
    I've done 3 so far. One on my ti Tyrade(I have a spare), my ti JYD( I have a spare), and my grey g-10 JYD.

    I Hate the Big Ugly Clip! I get better every time I do 1. I take off the horns completely and grind down the part below the horns as much as I can. I don't see any modded

    clips with the end as short as mine.

    Tim must have been trying to win the Grand Prize for the Uglyist Clip of the Year when he designed the 1 for the JYD. He Must have won the prize.!!!!!

  18. #18
    Join Date
    Aug 2010
    Location
    Austin Tx
    Posts
    4,441
    Quote Originally Posted by oregonknifenerd View Post
    I've always thought they looked goofy on the JYD. MC556 that is exactly how I wanted to have mine ground! I've always thought the clip was the only part of the JYD that wasn't great. The SG2 with an STR clip is one of my favorites. The gothic style clip actually looks really nice on some of the Galyean Pros though but doesn't seem to translate well to a boring G10 handle and not a lot better on the rivet style handle.

    Here is a pro model where the clip really fits and looks incredible.
    You bastard!

    I have never seen that thing before, and now i have to have one! I was DONE, i was out of the addiction!... i had all my grails ordered and i was never going to buy another knife... you just couldn't let me get away could you

    Le Sigh...

    (please read with humor)

  19. #19
    Join Date
    Jul 2011
    Location
    LI, NY
    Posts
    4,571
    Quote Originally Posted by orangish ducktape View Post
    Where did you get the titanium clip?
    I think I got them from USAKnifemaker, I bought a bunch of different ones a while back.

  20. #20
    Join Date
    Sep 2011
    Location
    SK, Canada
    Posts
    471
    I like Kershaws Skyline clip the best.

    The goofy lines of the JYD's kind of make me feel as if it's a toy for a kid.


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •