$1500 Of Folders

[docbp87]

I'd get an XM-18 3.5, a Large Sebenza, and put the rest towards an SNG.

[Zookie]

Lochsa, and a Shirogorov Mod 95 HATI

[10mm Glock]

I'd get a Fherman Final Judgment, and a few Benchmade knives.

[masterj]

A hindered bowie and a pistol and I'm set.

[MRaymond]

A couple of Sebenza's(large and small), 2 or 3 Spydercos, and a custom slip joint(or 2 or 3 factory slip joints).

I could see doing this exact thing. Or what powernoodle said.

[10mm Glock]

I don't really like frame lock knives which has saved me a lot of money on mid tech and custom knives. I would buy some Sprint run/ limited edition/ gold class knives with locks I like and high end steel.

I agree. I like the axis lock much more than frame locks, and I was a Reeve dealer.
The only frame/liner lock I have is a HEST 2.0 and I've had to reset the Lockbar twice, I do like it though and I EDC it a lot.

[rexromic]

Small Sebenza,Demko AD-10 and XM-18 3.5.

[gooeytek]

Gareth Bull Warlock
Peter R Integral
Brad Southard Downing

Asap.

[drbobguy]

From my perspective if you're interested in knives you'd actually want to use, then $100-$300 is really the sweet spot. Anything above that and you're just paying for custom work or the name basically. There certainly is a difference between $50 and $200 though in terms of feel and usability.

If it were me I'd probably splurge and get some Spyderco sprints, benchmade gold class and the like. Maybe a sebenza since I've never had one (I'd get a small, nothing fancy like damascus, and i'd actually use it). I wouldn't buy anything like a Hinderer though, which are great if you can get one at MSRP but the inflated prices you see online are just not worth it, considering you could just get a ZT 0560 for under $300 and have something comparable.

[MEJ]

2 sebs and the rest spyderco for me

[BladeChick777]

Hinderer XM 18 3.5 Flipper
Large Sebenza
Spyderco Tuff
Spyderco Southard Flipper
And if I have enough a Spyderco Leafstorm

[Thrustus]

I would buy a small busse (4" blade) then pay one of my favorite custom makers to make it into a titanium framelock flipper

Good idea. Don't know what Jerry would think.

[Curtain Call]

Rockstead Knives... but considering I have only $1500 then I should probably just say "knife"

[red mag]

A custom folder, maybe a Terzuola.
If, there is some money left, I'd take some Spydies (Enduras)
red mag

[imbryan715]

3 mid techs. large regular sebenza, strider sng with 3v and a hinderer 3.5 xm-18 with 20cv

[tp1l]

If limited to folders, it would be a Mnandi, Sebenza, a few inexpensive models from Kershaw, Spyderco and Benchmade that I've had my eye on, and spend the rest on a box of SRM and Enlan just to tinker with.

If fixed blades were allowed, I'd remove all of the detritus and pick up a Murray Carter neck knife.

[C@llector]

I WOULD BE LOSING MY MIND if i had 1500 dollars to spend on knives

[Ramil839]

Busse TGLB,another massive khukuri (HI,anything full tang and in the 20+ long and 1/2 thick) and a couple edc blades,not sure which ones yet but a custom karambit for sure.

[rpdknife]

These:
ESEE 3-MIL, Small Insingo, Large Sebenza, and a Shirogorov Hati 95:

[Hadji Flip Me Over]

I'd buy a nice .308 AR. $1500 is ridiculous for a knife or a bunch of knives.