- Joined
- Jul 23, 2015
- Messages
- 16,269
Sheet is 23.5" x 11.6", .100" AEB-L. All of these will be heat treated by Jarod Todd for world class performance. The sheet is in transit to HAI waterjets in Trenton, Ontario, and the CAD file contains the following designs:
Two Boomerang 2s
Seven Bittyrangs
More about those two models here:
www.bladeforums.com
Two of each model of the seven models in my new Mustelid Scout series:
www.bladeforums.com
One November 2022 CQI Prevail, per the changes described at the end of this post:
www.bladeforums.com
Two Bird in Trouble knives which I based on a bird and trout design sent to me by a customer:
www.bladeforums.com
One Edge-C (Every day gent's carry) variant for a good friend (it is the 7th vertically oriented knife from the left)
And two santokus not designed by me, but a design requested by a customer. One for him, and one for me.
I was not sure I would announce this run and open it up to reservations, thinking I might sell these locally, but I have decided that the Bladeforums community has been too good to me not to allow our fine members to reserve some of these. And whatever doesn't get reserved by BFs members, those ones I can sell locally. No deposits will be required; reservations will be on a ROFR basis, and payment will be due only upon completion, via itemized PayPal invoice which I will send to your email address at that time (I also e-transfer from Canadian members). As usual please send messages in PM or email to make reservations, or inquire about pricing and options. Please allow me some time to reply, as I am about to become extremely busy when my order of 40+ MagnaCut blades arrives back from heat treatment, and then the big 8670 blades thereafter, but I will update this thread as is my custom with updated pictures indicating which models are reserved.
To that end, let's start that now, shall we? Blanks in red below are already spoken for.
Two Boomerang 2s
Seven Bittyrangs
More about those two models here:
Boomerang, Midirang, and Bittyrang
How many knife models would a knife maker model if a knife maker could model knife models? A knife maker would model all the knife models he could model if he stayed up late modeling knife models instead of sleeping or playing endless online chess. Behold the Boomerang 2 and Bittyrang: Just...
www.bladeforums.com
Two of each model of the seven models in my new Mustelid Scout series:
Mustelid Scout Series - EDC/Large Neckers
A few of you have tried blades I cut by hand like these ones, and have said that you liked them. I am going to be making more like these, in .100" AEB-L first (just over 3/32"), and possibly other steels and thicknesses down the road. If they are successful in the first run, MagnaCut is a...
www.bladeforums.com
One November 2022 CQI Prevail, per the changes described at the end of this post:
Knife Models by David Mary
The thought of compiling this list had been intimidating me at first, because of the fairly wide variety of designs I've made now. Including them all would be a pretty difficult, perhaps impossible challenge. When I started a few years ago, it never occurred to me to document my design...
www.bladeforums.com
Two Bird in Trouble knives which I based on a bird and trout design sent to me by a customer:
Knife Models by David Mary
I have this model you dubbed the speed gladius. Makes a good trail clearing pack blade for fishing.
www.bladeforums.com
One Edge-C (Every day gent's carry) variant for a good friend (it is the 7th vertically oriented knife from the left)
And two santokus not designed by me, but a design requested by a customer. One for him, and one for me.
I was not sure I would announce this run and open it up to reservations, thinking I might sell these locally, but I have decided that the Bladeforums community has been too good to me not to allow our fine members to reserve some of these. And whatever doesn't get reserved by BFs members, those ones I can sell locally. No deposits will be required; reservations will be on a ROFR basis, and payment will be due only upon completion, via itemized PayPal invoice which I will send to your email address at that time (I also e-transfer from Canadian members). As usual please send messages in PM or email to make reservations, or inquire about pricing and options. Please allow me some time to reply, as I am about to become extremely busy when my order of 40+ MagnaCut blades arrives back from heat treatment, and then the big 8670 blades thereafter, but I will update this thread as is my custom with updated pictures indicating which models are reserved.
To that end, let's start that now, shall we? Blanks in red below are already spoken for.
