An old picture

[scott475]

From American Handgunner, March/April 1998. Came across it in a pile of magazines. Really, I DO read them for the articles.

-Scott

------------------
Usual Suspect, Junior Grade

[This message has been edited by scott475 (edited 03-01-2001).]

 

[HC Leo]

I have that same article. One of the few magazines I brought with me when I relocated.
There is also an awesome CQC6 that has the 50/50 serrations. Plus a spread on Ernie's work.

Great pics of CQC5..CQC6...ES1-M plus one with the Spyderco hole. And a coupla fixed blades....I love the Rogue Warrior!

 

[BluErf]

Might I ask what is ESM 1-M?

I have a Commander with an ESM 1-M stainless clip...

[This message has been edited by BluErf (edited 03-02-2001).]

 

[John Hollister]

BluErf

Might I suggest you check out the Emerson Gallery. You'll find pictures of just about every Emerson Custom model known to exist there.

Including the ES1-M:

You'll find that the ES1-M is pretty close to a Commander, except they are hand made customs, are about 20% larger overall and are Chisel ground.

You'll also find a section on clips on the Gallery as well.

Hope that helps

John

 

[Izrafil]

Speaking of old pictures of Emersons do you guys remember that issue of some gun magazine that featured Les Baer's Monolith .45 with a CQC-8?

It was a few years ago, but THAT was what tipped me off to my CQC-8 craving. Les Baer's guns were just decorative in the picture as far as I'm concerned

. My first Emerson designed knife was a chisel ground benchmade. It has seen quite a bit of use ...