navman
Knifemaker / Craftsman / Service Provider
- Joined
- Mar 4, 2013
- Messages
- 2,779
Combining a few for sale threads into one. All prices are set at $250 (each) shipped in the US (to include HI and AK). If interested in one, post here or send me a DM with the reference letter (A, B or C). Further details as follows:
A. Bird and trout or EDC knife. 3.2 inch blade of high hollow ground S90V at .138 thick, heat treated by Peters' to 61.5 RC. Blade is hand satin finished to 500 grit and has a rounded spine with 30 lpi thumb serrations. The tang is tapered and wears sculpted black paper micarta scales with red and black G10 liners, secured with copper Corby and lanyard tube and has a carbon fiber a stainless steel "Tree of Life" pin. OAL is 7.25 inches. Rides in a hand sewn black leather belt sheath with red stitching to compliment the handle.
B. EDC Clip point with a swedge. The 3 inch blade is hollow ground from S90V heat treated by Peters' to 61.5 RC. OAL is 7 Inches. The tang is tapered and wears white linen micarta scales with black and white G10 liners. The handle is secured with System 3 epoxy, stainless Corby and a stainless and black micarta "bullseye" lanyard tube. The front of the handle has a rounded finger index section serrated at 30 LPI. Rides in a cross draw, hand sewn leather sheath with white stitching.
C. Hidden tang skinning knife. The blade is 2.9-inch flat ground .140 thick CPM S110V, heat treated by Peters' to 63 RC, with a handle of green linen micarta, orange and green G10 liners, a stainless-steel guard, Corby and lanyard tube surrounded by a Westinghouse micarta tube. Very thin behind the edge and razor sharp. 7 inches OAL. Hand sewn leather sheath with orange thread, I made the welt thick to better fit the guard, and it fits like a glove!
A. Bird and trout or EDC knife. 3.2 inch blade of high hollow ground S90V at .138 thick, heat treated by Peters' to 61.5 RC. Blade is hand satin finished to 500 grit and has a rounded spine with 30 lpi thumb serrations. The tang is tapered and wears sculpted black paper micarta scales with red and black G10 liners, secured with copper Corby and lanyard tube and has a carbon fiber a stainless steel "Tree of Life" pin. OAL is 7.25 inches. Rides in a hand sewn black leather belt sheath with red stitching to compliment the handle.
B. EDC Clip point with a swedge. The 3 inch blade is hollow ground from S90V heat treated by Peters' to 61.5 RC. OAL is 7 Inches. The tang is tapered and wears white linen micarta scales with black and white G10 liners. The handle is secured with System 3 epoxy, stainless Corby and a stainless and black micarta "bullseye" lanyard tube. The front of the handle has a rounded finger index section serrated at 30 LPI. Rides in a cross draw, hand sewn leather sheath with white stitching.
C. Hidden tang skinning knife. The blade is 2.9-inch flat ground .140 thick CPM S110V, heat treated by Peters' to 63 RC, with a handle of green linen micarta, orange and green G10 liners, a stainless-steel guard, Corby and lanyard tube surrounded by a Westinghouse micarta tube. Very thin behind the edge and razor sharp. 7 inches OAL. Hand sewn leather sheath with orange thread, I made the welt thick to better fit the guard, and it fits like a glove!
Last edited:
