Bailey Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 18, 2004
- Messages
- 3,690
Here is my Model 2.2. I decided to make a thinline framelock with it. The blade is S35VN, heat treated by Peters' to 60rc. I hand polished the blade to 800 grit. It runs on bearings and snaps open very nicely. The detent is solid and the lockup is early and strong.
The handles are the titanium I use for linerlocks. I tend to go a little heavy on liners, so this measures about .075 thick. It is strong and does not allow the handle to flex, but it is also very thin. The knife just seems to disappear in the pocket. The clip is also titanium, and all the hardware is stainless.
Dimensions
Blade - 3" Tip to handle
OAL - 7 1/8"
Closed - 4 1/8"
Price - $sold shipped to US. I will also ship internationally for an additional fee.
I have this posted elsewhere, so the first timestamp saying "I'll take it!" gets it.
The handles are the titanium I use for linerlocks. I tend to go a little heavy on liners, so this measures about .075 thick. It is strong and does not allow the handle to flex, but it is also very thin. The knife just seems to disappear in the pocket. The clip is also titanium, and all the hardware is stainless.
Dimensions
Blade - 3" Tip to handle
OAL - 7 1/8"
Closed - 4 1/8"
Price - $sold shipped to US. I will also ship internationally for an additional fee.
I have this posted elsewhere, so the first timestamp saying "I'll take it!" gets it.
Last edited:
