Nickel Silver Material for Guards

Help! I've been thrown a curve as most suppliers are out of nickel silver 3/8" bar stock. I prefer the nickel silver as it's easier to work than stainless.

Does anyone know of a supplier that has this? Does anyone have a need to get rid of some of their stock? I usually use 3/8" x 3/4" barstock, but 3/8" plate would be great as well.

Thanks,

Dan
Hannon Bearclaw Knives
http://home.nfolink.com/~dhannon/index.htm
 
Mike Hull

Mike Hull

Joined
Nov 25, 2000
Messages
5,548
Dan,i've got some NS already cut, w/ slots cut in it for single guards.If you can use any,let me know.

------------------
MIKE
 
dont know if youve checked with Sheffield supply in Fla....but they have nice n/s with very little discoloring over time.
 
Had'nt looked at this stuff in a long time,turns out to be 5/16",not 3/8".Slots are 3/16".Sorry for the bad info.

------------------
MIKE
 
Many thanks. I'll try both of these (as soon as they open in the morning). Sure will help the soldering....

Dan
 
You must log in or register to reply here.
Back
Top