Uncovsky knives (Fenrir - new photos)

Nice day everyone,
I would like to show you the last finished knife that we have for the bladeshow. Sometimes work goes smooth and is done in a few days and sometimes the project takes several months. This was the first case. I had the idea of putting a distinctive text on the knife. I chose Dies Irae (Day of Wrath). It has several meanings for me personally, but I keep it for myself. I hope the owner will have his own story connected with him and the knife.
This is the PUPO model with a minor change. There is an extended guard for better finger protection. Because a lot of you want a fixed clip, Iam trying to make it part of every knife and incorporate it into design.

I wish you a nice day and I will be happy for any feedback
1f642.png

Matěj


21077635_867232256768320_866887576211853735_n.jpg

21105444_867232253434987_585094402007555753_n.jpg

21077297_867232260101653_4086067730968999829_n.jpg

20993873_867232560101623_3287409961845590095_n.jpg

20993856_867232563434956_5075266967871928246_n.jpg

21106334_867232566768289_2389823611872757918_n.jpg
 
Hello everybody,
We are slowly finishing the knives that we have been working on before the bladeshow. This week is ending of the two-month preparation and some other knives are done and only have to be photoshooted. First we would like to show you the final shape of our flipper. As a rest of the knives, this one will be seen at the exhibition in Příbram. This time we also enclose a video to see the knife in action. Size is the same as our other knives - 182mm (7,16inch) in open state. It runs on stainless steel bearings and body is as always from titanium. As we promised, the clip will always be part of knife. As a knife design, we wanted a more natural motive this time. We hope you will like it!
Matěj and Anicka

21150134_868205110004368_5079087478774692757_n.jpg

21034391_868205120004367_7651847570849905449_n.jpg

21078378_868205106671035_6165448862640344296_n.jpg

21034646_868205416671004_872506349203858489_n.jpg

21105760_868205436671002_4962989600250744160_n.jpg

21077743_868205393337673_1532982056323055224_n.jpg


 
Hi everybody!
Our nervousness slowly rises with the number of days to Příbram, which are falling rapidly. But a little bit of another story for today. On the photos are one of our last finished knives.

The project lasted a little longer and took a lot of work. On each side there are several layers and each has different properties and they are overlapping each other. The theme of the knife was created ondiscussions with the customer. Eventually, the ideas did not match, but it was a eager to create the design.

And what about the knife? The opposition of sides is obvious. At first is the Virgin Marie with a cross in the background. On the background of the knife is the Latin prayer Angelus Domini (Angel of the Lord). The letters are in white, contrast to the second side. On the other side, there is a goat head in the pentagram on the rotated cross (you can see it at the wings, the symbol of the fallen angel). A part of the Codex gigas (https://en.wikipedia.org/wiki/Codex_Gigas) is in the background. Drawn in black.

For the great photo is responsible Anna as usual.
1f642.png

Matej

21414598_873073386184207_2984776945016444422_o.jpg

21316457_873073379517541_5376701374138357968_o.jpg

21415050_873073369517542_7229086050265224804_o.jpg

21318993_873073462850866_8161481906161774932_o.jpg

21316209_873073549517524_4125517484577903574_o.jpg

21316228_873073562850856_7658683296655818994_o.jpg
 
Hi everyone!
Last finished knife. :)

On the scales is drawing Sea Storm burnt by laser (0,2mm depth). Its inspired by Norse mythology. On first scale is Odin (https://en.wikipedia.org/wiki/Odin) and on the other side is Thor (https://en.wikipedia.org/wiki/Thor).
On the knife is grinded titanium clip and knive have anodized backspacer.

Knife specification:
Length in closed position: 4.134 in / 105 mm
Length in the open state: 7.283 in / 185 mm
Blade length: 3.189 in / 81 mm

Blade Specification:
Steel: RWL 34 (hardness: 61- 62 hrc, vacuum, cryo)
Blade Thickness: 0.126 in / 3,2 mm
Grind: Flat to V

Knife rides on stainless bearings. Handles are from titanium gr. 5.

Have a nice day,
Anna and Matej

21765192_882108811947331_7331755336457735694_n.jpg

21765356_882108875280658_8961123626003915560_n.jpg

22007956_882108851947327_3298354567285797078_n.jpg

21768147_882109018613977_7921733899686865439_n.jpg

21768371_882109061947306_4171141405857574514_n.jpg

21766692_882109068613972_1540249299743320054_n.jpg

21766371_882109165280629_2411224347274587350_n.jpg

22007733_882109178613961_2422167626314993519_n.jpg

22008425_882109201947292_71938925459388854_n.jpg

22046514_882109241947288_95006209327867049_n.jpg

22007653_882109271947285_9176962298749747267_n.jpg
 
Hi, we've started working on the custom orders, so we'd like to show you the last one. :)
Thanks for watching!
Anna

22529007_893013324190213_4371894495663580895_o.jpg

22528859_893013504190195_7313135670135049582_o.jpg

22538662_893013334190212_2637412338366209364_o.jpg

22496062_893013337523545_3146737057555139701_o.jpg

22519884_893013507523528_8005338100129393072_o.jpg

22528667_893013534190192_241199762542443271_o.jpg
 
Hey everyone!
We have a little riddle for you.

What we will do, to make our knives looking better? Photo is your hint.
I will post result here in a few hours.
1f642.png

Anna
22555376_895985040559708_3428575966058750992_o.jpg
 
Belt sanding?
Sand Blasted finish?


Your knives are very impressive. The engraving detail and artwork is most excellent.

Do you hand drawn all your own designs?
 
Belt sanding?
Sand Blasted finish?


Your knives are very impressive. The engraving detail and artwork is most excellent.

Do you hand drawn all your own designs?

Hello, at our new model will be now some parts sanded and polished. And because of coplexity of shape it have to be done by hand.

About the designs. Iam are searching at the internet for interesting drawings from various people. If I like it Ill buy them and convert to the shape of handle. have to make some cuts and editing because drawing are in some common format (A4). Then I will edit the final desing, add contures and lines that are necessary. Also the layers have to be done. And than it is converted to the laser and few hours of engraving. Anfter that the polishing is done to show contures and lines and layers :)
Matej

22791544_896068167218062_8755568225361172506_o.jpg

22555372_896065640551648_2612703992651100116_o.jpg

22555741_896065637218315_5489475488532084384_o.jpg
 
Hello my friends,
we're working hard on Christmas custom orders. A new, third-generation knife in its naked form before engraving.
Thank you for your favor and patience :)
Matej and Anna

Knife specification:
Length in closed position: 4 3/8 in / 111 mm
Length in the open state: 8 5/64 in / 205 mm
Blade length: 3 5/8 in / 92 mm

Blade Specification:
Steel: RWL 34 (hardness: 61- 62 hrc, vacuum, cryo)
Blade Thickness: 1 17/64 in / 3,2 mm
Grind: Flat to V

Knife rides on stainless bearings. Handles are from titanium gr. 5.

22904802_900007886824090_6719860769075527527_o.jpg

22860150_900007900157422_4224911933914337799_o.jpg
 
Hello my friends,
we finally finished our first-ever third generation knife. We moved him a little further again and tuned all the little things. We are finishing all the orders, but we had to do this one first. Knife comes to my father, he is big fan and enthusiasts for smoking, grilling and drying meat.
Matej

PS: We are already looking at homemade smoked meat :)

Specifications:RWL34, all parts from titanium and its larger (205mm). Bearings, ceramic detent and smooth opening as always.

23213267_902914023200143_1915420917448912124_o.jpg

23215541_902914036533475_984117356717686541_o.jpg

23270120_902913966533482_4326497825156604067_o.jpg

23405687_902914119866800_1519976094956712309_o.jpg

23244506_902914226533456_4097789323927975547_n.jpg

23167538_902914246533454_7643905596747740401_n.jpg
 
A nice pre-Christmas evening for everyone,

I would like to show you one long-term project. Ronin. Our classic model with a few adjustments on customers request. On the backspacer is now engraving. The blade is lasered to black, I call it laserwash. I do not know if anyone ever used it, so maybe it's world premiere :). I had lot of trouble with it. Clip and backspacer are anodized by heat. On the clip is kanji for ronin. Try to guess Kanji on the blade :)



Nice holidays,

Matěj

171219001.jpg 171219002.jpg 171219003.jpg 171219004.jpg 171219005.jpg 171219006.jpg
 
Thank you for posting your work, your knives are fantastic!
 
Nice New Year's Day,

I wish all the smallest headache from yesterday's night. And those who do not need to sober like me, I wish nice free day.



I would like to tell you a little about the plans for the next year. The end of the year was quite challenging, but I hope everyone is happy with their knife. Unfortunately, it looks like the planned moving to new place does not happen, so I can focus into knife production. Linnerlock is already tuned in his third generation to my perfection. That is why I want to move forward how Iam creating knives. Iam going to improve technical parts and final finish of the knives. I have one model of knife in my head almost the beginning of the making knives. I hope it can be finished this year. I want to show you the new model as soon as possible.



Well, I must not forget the last Christmas knife :). The drawing was one of the most difficult things I did. I tried to capture the theme of the tatoo of the gifted. It's the first knife with a blade in the shape of a dagger. Photos by my wife, the oil is from Greece and of course is olive :)



Matěj

171121001.jpg 171121002.jpg 171121003.jpg 171121004.jpg 171121005.jpg
 
Beautiful beautiful work! I am not a folder guy but these pieces of art, I think anyone should be able to appreciate them.
 
Good day sir,
we are signed at this year's Pribram exhibition of knives. We'd be glad to meet some of you and talk a few words. Because of exhibition my knives will not be for sale for some time. Therefore, at least I attach photos of the last one I completed.
Matej

180620001.jpg 180620002.jpg 180620003.jpg
 
Back
Top