110/112 pivots

[pholder]

good evening,
i'm trying to find out if buck uses a bushing of sorts in the pivot of their 110/112. or do they use a brass rod. i'm thinking a brass rod would not hold up to hard use. any info will be greatly appreciated. i couldn't find anything on their site. thanks all, troy

 

[David Martin]

troy,Welcome.Buck uses both a 5/32 brass rod with a 2/32 copper bushing pressed in the blade at pivot like a donut.Hope this helps.DM

 

[chickentrax]

troy,Welcome.Buck uses both a 5/32 brass rod with a 2/32 copper bushing pressed in the blade at pivot like a donut.Hope this helps.DM

It's possible some 110's & 112's use a 1/8" brass pin for the blade pivot...which passes through the brass donut...mine do...

 

[pholder]

thanks all for the reply, greatly appreciated

 

[David Martin]

Trax,Thats totally possible.Kind of depends on the year. As there were lots of changes in those models.DM