154CM EDC

[Buzzbait]

I just have to say that after a week or two of use....... I love this knife!!!! I've had a few short-lived knife fascinations lately, but it looks like the 154CM EDC is here in my pocket for a while. Darrel and Camillus did a sensational job on this one. No matter how much I try, I can’t seem to find anything about this EDC that bothers me. I’m suddenly not in such a hurry to get that small Sebenza.

I liked the 420HC version a lot at first, thinking it was a pretty good value, but the 154CM version is a HUGE value. If you ask me, Camillus should make 154CM the standard for the EDC. I’d buy the 154CM version at twice the price and be a happy camper. This is a knife that all other manufacturers would have to seriously contend with in their production runs. It’s a crime that the stock of 154CMs will run out sooner or later, depriving newcomers of a simply amazing knife.

Batman and Robin were my childhood heroes. Now that I’m older, my new heroes are Darrel and Will.

 

[knifenerd]

I agree 100%. When I received mine, I ordered 2 more.

It's a great value.

Dick

 

[Darrel Ralph]

I should have one today .
HURRY SPARK!!!!!!!!!!!!!


------------------
Web Site At www.darrelralph.com
MADD MAXX !

 

[Mike G]

I"ve been carrying mine now for a week, and absolutely love it!!! The knife is much slimmer than the BM 720 I was carrying, and the non serrated blade is more 'sheeple' friendly.

Great design, Darrell, and thank you for allowing Camillus to produce this knife. I like your designs a lot, and I'm very seriously considering one of your customs in the near future.

Mike



------------------

DISCLAIMER:

The opinions expressed here are my own, and in no way reflect the opinion of any other person, living or dead. Of course, your opinion may vary, in which case the prevailing laws of your jurisdiction shall apply.

 

[Darrel Ralph]

Got Mine today!

Man the things they keep from the designer!
The blade looks just right with this finish for the handle! The blade is in the middle, sharp out of the box, fit and finish is good.

I love it!
:]

The Camillus EDC and a 7 inch MADD MAXX, 4 inch EDC and I have a knife for every occasion! WOHAAAAAAAAA!

Good Job Camillus!



------------------
Web Site At www.darrelralph.com
MADD MAXX !

 

[Jazzman]

I just ordered mine today. I can't wait. I hope that it holds off the Sebenza bug until the summer. I am getting anxious!
Matt

 

[shootist16]

<font face="Verdana, Arial" size="2">Originally posted by Darrel Ralph:
The Camillus EDC and a 7 inch MADD MAXX, 4 inch EDC and I have a knife for every occasion! WOHAAAAAAAAA!

Good Job Camillus!

</font>

Now if we can just talk Camillus into making a 4" version.

------------------
Dennis Bible

....Almost here, The Leading Edge....
http://www.theleadingedgeonline.com

 

[The Magician]

Well, after all the good I hear, I guess I need to get one too....

------------------
Brian
The first knife was probably used to cut stuff.

 

[The Magician]

Well, after all the good I hear, I guess I need to get one too....

------------------
Brian
The first knife was probably used to cut stuff.

 

[Sharp Tools]

Great design by one of the top makers/designers out there. Very well made by one the knife industry's best companies and made with very good materials.

All this for 65.00 bucks, you must be kidding!

I have had mine for a week and it has been opened/closed a few hundred times (my wife seems to keep count, it drives her crazy) and the "flick" continues to be great.

Kevin

 

[bigbore.45]

Now if we can just talk Camillus into making a 4" version.

[/B][/QUOTE]


Yes that would be my wish this year!

The EDC is a fabulous knife but with 4" it would be ********* !!!!!!!!!!!!!!!


------------------
*so is life : hard but unfair*
~*~*~*~*~*~*~*~*~*~*~
~bigbore`s knives~

 

[speedrck]

Ditto on the 4" blade EDC.

------------------
Ray Carr

 

[Mike Turber]

Hopefully Will Fennell will not read this

Will and I talked about a 4 inch version. A prototype has been made and it is under evaluation at this time. We first need to see some solid numbers on the EDC before a MEDC (Mega, Monster, Mutha, insert M word here

) 4 inches may be a bit too big but a 3.50 - 4.00 may be a better fit for the line. Stay Tuned as Will has the only one in existance and hopefully it will become a reality but you guys need to buy all the small versions first

------------------
Best Regards,
Mike Turber
BladeForums Site Owner and Administrator
Do it! Do it right! Do it right NOW!
Show Your Support -Visit Our Sponsors - Click On The Banners!
Visit www.onestopknifeshop.com
Sales from 1 Stop Knife Shop help support this site!

 

[knifenerd]

I already own 3 of the EDCs and would love to see a 3.5" version. Come on Mike, I doing my part.

Dick

 

[Buzzbait]

Woohoo!!! A just under 4" version EDC would be absolutely perfect. I'm really happy with the 154CM so far. I hope they go the same route with the larger model.

I've picked up two of the 154CMs so far, doing my part to make a larger version happen!!!

I don't suppose Will is looking to adopt a slightly older than usual son?

 

[Jason Burns]

I am waiting on the Brown Truck to bring my two EDCs. HOPEFULLY today!! From what I have heard, I'd get two big brothers in a heartbeat to keep these company! I hope Will DOES read this post!
I guess for now the "M" will have to stand for "MAYBE"!

 

[Alberta Ed]

A larger EDC sounds nice... how about a special run with a carbon steel blade? Say, the 50100c (or whatever) like they are using in the Becker line?

 

[Buzzbait]

A carbon steel version? How about a carbonless steel version?!?!?! A TEDC!!!!!