2 firebrick forge for beginner

[cangcimen416]

so i found this video series,quite cool and i wonder where he get that big chunk of firebrick!
part 1

https://www.youtube.com/watch?v=aRJAhearK_U

part 2

https://www.youtube.com/watch?v=wdKk4CuSnYc

part 3

https://www.youtube.com/watch?v=cqhAuMx-oLg

 

[Stacy E. Apelt - Bladesmith]

In the stickys there is a section on forges with instructions for making a two brick forge.

I don't suggest one because the heat control is very poor. They are barely suitable for forging, and terrible for HT.

You would be far better off to build a small regular forge. Plans and info for a regular forge are also in the stickys.

Also, Atlas Forge sells a nice small forge for an affordable price.

 

[cangcimen416]

In the stickys there is a section on forges with instructions for making a two brick forge.

I don't suggest one because the heat control is very poor. They are barely suitable for forging, and terrible for HT.

You would be far better off to build a small regular forge. Plans and info for a regular forge are also in the stickys.

Also, Atlas Forge sells a nice small forge for an affordable price.

ooh im so sorry sir i rarely read the sticky,well if this useless thread go on delete it

 

[Stacy E. Apelt - Bladesmith]

No, it isn't a useless thread. I was just letting you know where you can find some of the information you want, and offering an opinion of the usability of a 2BF.

Fill out your profile so people know a bit about you and where you are. That helps with better answers, and a nearby maker may offer you direct help or supplies.

 

[cangcimen416]

No, it isn't a useless thread. I was just letting you know where you can find some of the information you want, and offering an opinion of the usability of a 2BF.

Fill out your profile so people know a bit about you and where you are. That helps with better answers, and a nearby maker may offer you direct help or supplies.

oh will do sir!

 

[Stacy E. Apelt - Bladesmith]

I figured you may be overseas. Knowing that makes my suggestion of an Atlas forge of no use for you.

However, there is a great thread by the builder of that forge on how he makes a forge from 2 fire bricks.
http://www.bladeforums.com/forums/showthread.php/920120-Virtual-BBQ-2-Brick-Forge-WIP

There are also many threads on making burners and forges in the"Good Info" sticky.
http://www.bladeforums.com/forums/showthread.php/782574-PID-CONTROL-FORGE-Salt-Pots-and-more

The whole sticky is full of good info you should read:
http://www.bladeforums.com/forums/s...reads-All-The-Good-Info-You-Want-In-One-Place