2009 annual representative works
This is the 2009
Of this year's phase representative works.
[August finished]. [Legal no blade]
开始.
This work will be produced.
Also happens to have a friend who bought a "3v" of steel.
Said that they wish to commission me to create some of the knife.
Then there is a steel to me freely.
So I tried a lot of production ideas and new applications.
Introduction.
This is the steel is "3v" forging heat treatment and then sent to factories.
I can see the care hand made three-dimensional look.
Have also done a different metal combinations.
Changxin.
This is the knife I did a total of five flowers.
Tomi 2 bud. Squirts on a flowering [inlaid amethyst].
Hand two results. [The middle of inlaid amethyst].
Unlike the past, almost all the way to three-dimensional rendering.
Also has its own handmade hand-carved pattern sheath.
Act according to circumstances.
Was originally intended to handle is the garnet color with beige wood production.
Later, after the sheath began making.
Found that the two groups just do not ride with them.
Finally simply all dyed the same color.
Collection.
Produced after
The knife and sheath that alone can not satisfy my desire to have a.
So hand-produced collection boxes. [Full Red Wooden]
So that the whole have visual satisfaction.
Works description:
Of steel. "3v" Forged + Heat Treatment + vacuum cryogenic treatment HRC59
Bright surface treatment. Stippled handle.
Hand .303 stainless steel. Copper [Results]. Inlaid amethyst. [Detachable grip]
Nursing metal ring .303 stainless steel. Copper [carved] .303 stainless steel.
Handle material. Boxwood garnet [dyeing processing]. 303 Stainless Steel
Sheath material. Copper-nickel alloy. 303 stainless steel. Tiger maple [dyeing processing]. Mosaic Amethyst
Total length of about .37 cm. Blade length of about .19 cm.
Collection boxes. Redwood. Copper. Stainless steel screws.
2009年度代表作品
這是2009年
這個年度的階段性代表作品.
[8月份製作完成的].[合法未開刃]
開始.
會製作這個作品.
也是剛好有朋友買了"3v"的鋼材.
說要委託我製作一些刀子.
然後有一把的鋼材給我自由發揮.
於是我就嘗試了很多的製作想法及新的應用方式.
介紹.
這把鋼材是用"3v"鍛造然後送工廠熱處理的.
可以看到護手我做成立體的樣子.
也做了不同金屬的組合.
嘗新.
這把刀子我總共做了5朵花.
頭尾2個含苞待放.鞘上1個開花[鑲嵌紫水晶].
護手兩個結果.[中間鑲嵌紫水晶].
有別於以往這次幾乎都以立體方式呈現.
還有自己親手製作的手工鞘刻花樣.
隨機應變.
本來柄是打算用米黃色木榴原色製作的.
後來鞘開始製作後.
發現兩組配起來就是不搭.
最後索性全部染成同色系.
收藏.
製作完成後
覺得光是刀子與鞘已經滿足不了我的慾望了.
於是手工製作了收藏盒.[全紅木製]
這樣整個才有視覺上的滿足.
作品說明：
鋼材."3v"鍛造+真空熱處理＋深冷處理　HRC59　
亮面處理.點刻處理.
護手.303不銹鋼.銅[結果].鑲嵌紫水晶.[可拆式握柄]
護鐶.303不銹鋼.銅[刻花].303不銹鋼.
柄材.黃楊木榴[染色處理]．303不銹鋼
鞘材.白銅．303不銹鋼.虎斑楓木[染色處理]．鑲嵌紫水晶　
全長約.37公分.刃長約.19公分.
收藏盒.紅木.銅.不銹鋼螺絲.
好了.
欣賞圖了.
This is the 2009
Of this year's phase representative works.
[August finished]. [Legal no blade]
开始.
This work will be produced.
Also happens to have a friend who bought a "3v" of steel.
Said that they wish to commission me to create some of the knife.
Then there is a steel to me freely.
So I tried a lot of production ideas and new applications.
Introduction.
This is the steel is "3v" forging heat treatment and then sent to factories.
I can see the care hand made three-dimensional look.
Have also done a different metal combinations.
Changxin.
This is the knife I did a total of five flowers.
Tomi 2 bud. Squirts on a flowering [inlaid amethyst].
Hand two results. [The middle of inlaid amethyst].
Unlike the past, almost all the way to three-dimensional rendering.
Also has its own handmade hand-carved pattern sheath.
Act according to circumstances.
Was originally intended to handle is the garnet color with beige wood production.
Later, after the sheath began making.
Found that the two groups just do not ride with them.
Finally simply all dyed the same color.
Collection.
Produced after
The knife and sheath that alone can not satisfy my desire to have a.
So hand-produced collection boxes. [Full Red Wooden]
So that the whole have visual satisfaction.
Works description:
Of steel. "3v" Forged + Heat Treatment + vacuum cryogenic treatment HRC59
Bright surface treatment. Stippled handle.
Hand .303 stainless steel. Copper [Results]. Inlaid amethyst. [Detachable grip]
Nursing metal ring .303 stainless steel. Copper [carved] .303 stainless steel.
Handle material. Boxwood garnet [dyeing processing]. 303 Stainless Steel
Sheath material. Copper-nickel alloy. 303 stainless steel. Tiger maple [dyeing processing]. Mosaic Amethyst
Total length of about .37 cm. Blade length of about .19 cm.
Collection boxes. Redwood. Copper. Stainless steel screws.
2009年度代表作品
這是2009年
這個年度的階段性代表作品.
[8月份製作完成的].[合法未開刃]
開始.
會製作這個作品.
也是剛好有朋友買了"3v"的鋼材.
說要委託我製作一些刀子.
然後有一把的鋼材給我自由發揮.
於是我就嘗試了很多的製作想法及新的應用方式.
介紹.
這把鋼材是用"3v"鍛造然後送工廠熱處理的.
可以看到護手我做成立體的樣子.
也做了不同金屬的組合.
嘗新.
這把刀子我總共做了5朵花.
頭尾2個含苞待放.鞘上1個開花[鑲嵌紫水晶].
護手兩個結果.[中間鑲嵌紫水晶].
有別於以往這次幾乎都以立體方式呈現.
還有自己親手製作的手工鞘刻花樣.
隨機應變.
本來柄是打算用米黃色木榴原色製作的.
後來鞘開始製作後.
發現兩組配起來就是不搭.
最後索性全部染成同色系.
收藏.
製作完成後
覺得光是刀子與鞘已經滿足不了我的慾望了.
於是手工製作了收藏盒.[全紅木製]
這樣整個才有視覺上的滿足.
作品說明：
鋼材."3v"鍛造+真空熱處理＋深冷處理　HRC59　
亮面處理.點刻處理.
護手.303不銹鋼.銅[結果].鑲嵌紫水晶.[可拆式握柄]
護鐶.303不銹鋼.銅[刻花].303不銹鋼.
柄材.黃楊木榴[染色處理]．303不銹鋼
鞘材.白銅．303不銹鋼.虎斑楓木[染色處理]．鑲嵌紫水晶　
全長約.37公分.刃長約.19公分.
收藏盒.紅木.銅.不銹鋼螺絲.
好了.
欣賞圖了.
