- Joined
- Jul 16, 2012
- Messages
- 4,177
Unfortunately I never heard back from the winner of the Moby Dick "newknifeguy" so I drew a new winner. That winner is #33. Congrats "slg98"!
****************************************************************************************************************************
The winner of the Moby Dick is post #68... "newknifeguy"
The winner of the EDC Kit is post #185... "John Johnson"
Send me an email or PM with your shipping information.
*******************************************************************************************************************************************
Well fellow Bladeforums members, I have reached another milestone on this wonderful niche of the interwebs. 3000 posts. Hopefully some of them have been of some use to people, or at the very least I hope I have been an enabler.
Anyway, I would like to give back with a giveaway.
Rules: You must be 18, and I apologize to my international brothers but I have to keep this GAW relegated to the US. I would like to keep this GAW to contributing members so you must have at least 50 posts. Just post "I'm in". To pick the two winners I will do a random drawing based on your post number via random.org in one week on Feb 10th. One entry per person. If you won't accept either prize then don't enter at all. No "I'm in for the chopper"...
Here are the two prizes.
#1 - TK Steingass Moby Dick Chopper - I used this a couple times and it eats wood like an angry beaver, it has good heft and come with a left hand cross draw sheath. This is a very well made chopper from a well respected knife maker. Check out some of his other work!
.250" W-2 stock
HT to Rc 60-61
1 lb 7.4 oz weight
16 3/4" OAL
11 1/4" Blade - 2" Wide - Vivid hamon
Hollow ground blade with Moran edge
Premium stabilized English Walnut scales
Tapered tang with red liners
416 Stainless furniture
Squared/rounded spine
Pinned/Soldered double guard
#2 - EDC Kit
Here are the specs on the little fixed blade:
1/8. inch thick ATS-34 steel heat treated to about 60 Rc.
Handle is gutted black paracord wrapped over black lizard skin on the knifes full tang and all epoxy set.
Blade length 2.9 inches long with dark gray flats and steel bevels and with file worked spine.
Overall all knife length is 6.1 inches
Moby Dick
EDC Kit
****************************************************************************************************************************
The winner of the Moby Dick is post #68... "newknifeguy"
The winner of the EDC Kit is post #185... "John Johnson"
Send me an email or PM with your shipping information.
*******************************************************************************************************************************************
Well fellow Bladeforums members, I have reached another milestone on this wonderful niche of the interwebs. 3000 posts. Hopefully some of them have been of some use to people, or at the very least I hope I have been an enabler.
Anyway, I would like to give back with a giveaway.Rules: You must be 18, and I apologize to my international brothers but I have to keep this GAW relegated to the US. I would like to keep this GAW to contributing members so you must have at least 50 posts. Just post "I'm in". To pick the two winners I will do a random drawing based on your post number via random.org in one week on Feb 10th. One entry per person. If you won't accept either prize then don't enter at all. No "I'm in for the chopper"...
Here are the two prizes.
#1 - TK Steingass Moby Dick Chopper - I used this a couple times and it eats wood like an angry beaver, it has good heft and come with a left hand cross draw sheath. This is a very well made chopper from a well respected knife maker. Check out some of his other work!
.250" W-2 stock
HT to Rc 60-61
1 lb 7.4 oz weight
16 3/4" OAL
11 1/4" Blade - 2" Wide - Vivid hamon
Hollow ground blade with Moran edge
Premium stabilized English Walnut scales
Tapered tang with red liners
416 Stainless furniture
Squared/rounded spine
Pinned/Soldered double guard
#2 - EDC Kit
- Squall Spear Point Fixed Blade from Hard Edged Knives with Kydex Sheath
- Leatherman Style CS
- Countycomm Peanut Lighter
- CRKT Eat-n-Tool
- Paracord Bracelet with Whistle
- Countycomm Mini Prybar with Paracord Wrap
Here are the specs on the little fixed blade:
1/8. inch thick ATS-34 steel heat treated to about 60 Rc.
Handle is gutted black paracord wrapped over black lizard skin on the knifes full tang and all epoxy set.
Blade length 2.9 inches long with dark gray flats and steel bevels and with file worked spine.
Overall all knife length is 6.1 inches
Moby Dick
EDC Kit
Last edited:
