4" Ti-Lite questions

[KenHash]

Does anyone know for the 4" blade Ti-Lite.

- What size screws holds the scales together? T-6?

- What type and size washers are used for the pivot? (pivot size). I'm guessing nylon and can get them from knifekits.

I'm also assuming the same info for aove holds for all 4" Ti-Lites both post 2008 Taiwan ones and the older Japan ones.

 

[AF]

Yes, T-6 for the body screws.
It uses nylon washers but I don't know the size.

 

[KenHash]

thank you

 

[KenHash]

OK looking like the 4" Ti-Lite has a 3/16 Pivot. But don't know diameter or thickness. I'll just have to try several sizes.

 

[Hermit_Knight]

While we are talking about the ti lite does anyone know the torx size for the pivot screw that makes the blade tighten and loosen, mine is quite stiff even with oiling and constant flicking, thanks. It is the 6 inch model aus 8a.

 

[AF]

The 4" uses a T10 for the pivot. Not sure about 6".

 

[KenHash]

Can offer only the same reply as above. Because I only have the 4".