I really hope you guys appreciate this... 
I've noticed that there's been a fair amount of interest in EDC fixed blades lately. I really like the category and already had a short list on my computer, so I figured I might as well make it a bit more thorough and post it here. Hopefully this'll help a few people decide on their next purchase, show them a manufacturer they've never heard about before, e.t.c. I know that everyone's definitions of edc-able are different; I tend to lean towards smaller knives. Most knives on this list are below 7" OAL, which was my unofficial size limit.
If I missed anything, just say so and I'll edit the OP to add it.
The way the blades are shown, are:
Company names bolded and listed alphabetically
-Name of knife- Steel(s) the knife come(s) in, Blade Length x Overall Length
If I could only find the blade length, only blade length will be shown. If I could only find the OAL length, the OAL measure will be given, with the acronym OAL behind it to signify that it's the overall, (not blade,) length.
A.G. Russell
-Bird & Trout- D2/AUS 8/ATS 34, 3" x 6 3/4"
-ShopMade Caper- 154 CM, 3 1/16" x 6"
-Ceramic Neck Knife- Zirconium Dioxide(Ceramic), 2 1/2" x 5 1/4"
-Hunter Scalpel- AUS 10, 2 1/2" x 4 3/4"
-Woodswalker- AUS 8, 2 3/8" x 6"
Alan Folts
-Baby Bear- ATS 34/154 CM, 1 1/2"
-Minimalist- CPM 154, 2"
-SPEW- ATS 34, 2 3/4"
Arno Bernard
-Dassie- N690, 2 3/8" x 5"
-Gecko- N690, 2 1/2" x 5 1/2"
-Jackal- N690, 2 3/4" x 6 5/8"
-Meerkat- N690, 2 1/8" x 5"
-Porcupine- N690, 2 3/4" x 5 7/8"
-Raven- N690, 2 3/4" x 6 3/8"
-Squirrel- N690, 2 1/2" x 5 7/8"
ARS
-Shanghai Shank- 440C, 2" x 5"
Bark River(Many of these knives have been produced in multiple steels, even if they may not be listed as such.)
-Bravo Necker- 12C27/3V, 2.5" x 6.25"
-City Knife- CPM 154, 2.6" x 6.125"
-EPK- CPM 154, 2" x 4"
-Essential- M4, 2.7" x 6.2"
-Huntsman- A2, 3.25" x 7"
-Lil' Canadian- 3V, 3.25" x 7"
-Little Caper- A2, 2.75 x 5.75"
-Little Carver- 3V, 2.72" x 5.74"
-Little Creek- A2, 2.65" x 5.5"
-Mikro Canadian- 12C27/154 CM, 1.75" x 5.5"
-Mini Canadian- A2/3V, 2.2" x 6"
-Mini Fox River- A2/3V, 2.9" x 6.65"
-Pocket Bravo- 154 CM, 1.38" x 4.9"
-Pro Scalpel- 52100/3V, 2.25" x 5"
-PSK- 154 CM/12C27, 2.18" x 5.15"
-Woodland Special- A2, 3.2" x 6.87"
Bastinelli
-Cal Persane- 12C27
-Le Cal- D2
-Moon's Kiss- 12C27
-Rancunier- 12C27
Benchmade/HD/HK/Lone Wolf
-Benchmade Snody Activator- D2
-Bone Collector Fixed Skinner- D2
-Harley Davidson Tether Knife- 440C
-H&K Instigator- AUS 8
-Lone Wolf Caper- N680
-Lone Wolf Hard Way- N680
Benchmark
-3” Ceramic Parer- Zirconia Ceramic
-Backpacker- Stainless Steel
-Rucksack- Stainless Steel
Black Bear
-ACE- S30V
Blackhawk
-Kallista II- AUS 8, OAL 7.3"
Blackjack
-155 Neck Knife- 154 CM, 2.75" x 6.38"
-Model 12- A2, 3.75" x 7"
Blind Horse
-Bird & Trout Classic- 440C
-Brookie- O1
-Brumby Lite- O1
-Bushbaby- O1
-Drover- O1
-Frontier First- O1
-Frontier Trapper- O1
-Frontier Valley- O1
-Lil’ MUK- O1
-Maverick Colt- O1
-Nessy Necker- O1
-Small Workhorse- D2
-Tiger Knapp/Snap Knapp- O1
-Woodsman- O1
Boker (Collabs first, in-house designs at the end.)
-Andy Fitz Neck Knife- 440C
-Bud Nealy Illumination- 440C
-CLB EDIT- 440C
-CLB Microcom- 440C
-CLB Rescom- AUS 8
-CLB RNR- 440C
-CLB SubCom Fixed Blade- 440C, 2 3/8" x 5 1/2"
-Doug Hartsook Featherweight- Carbon Fiber
-Doug Hartsook Nub- 440C
-Dozier Arkansas Traveler- AUS 8
-Jared Price Toucan- 440C
-Jimmy Burke Tunnel Rat- 440C
-Jim Burke SOB- 12c27
-Mickey Yurco Yurco- 440C
-Miltner Adams MA-2- 440C
-Neil Blackwood Minx- S35VN
-Newton Martin K-BIT- 440C
-Peter Farkas Magyar- 440C
-Raimund Lhotak Rambler- 440C
-Steffen Bender Bender- 440C
-Todd Begg Kiridashi- 440C
-Tom Krein Grasshopper- 440C
-Tom Krein Pocket Bowie- 440C
-Tom Krein PSK Outdoor Knife- 440C
-Vox Gnome- 12c27
-Vox Mega Mini- 440C
-Vox Nippon Necker- 440C
-Vox Pry Mate- N690BO
-Vox Pry Mini- N690BO
-Vox Rhino- 12c27
-Vox Rhino Calf- 440C
-Vox SanYouGo Utility Knife- 12c27
-Wilson Tactical Cop Tool- 440C
-Boker Amico- N690BO
-Boker Beauty- N690BO
-Boker Arbolito Caper- 440A
-Boker Plus Cera-Neck- Ceramic
-Boker Plus Gent’s Scalpel- 440C
-Boker Magnum Escape Knife- 420
-Boker Magnum Mate Knife- 440
-Boker Magnum Neck Flash- 440
Branton Mid-Techs
-Multi Mission Neck Knife- CPM 154, 3" x 6"
-Red Neck Knives #1 and #3- CPM 154, 3" x 5.5"
-Red Neck Knives #2 and #4- CPM 154, 2.5" x 5"
Brous Blades
-Silent Soldier- D2
-SS Ranger- D2
Browning
-Deterrent- 154CM
-Extreme Mountain Hunter- 12c27
-Hunter, For Her- 12c27
-Lil' Bit Small Hunter- 12c27
-Tracer Neck Dagger- 440 Stainless/154 CM
Buck
-ErgoHunter Waterfowler/Small Game- 420HC/12c27/S30V
-Hartsook Ultralite- S30V
-Maya Kaala- S30V
-Mini Alpha Hunter- 420HC
-PakLite Caper- 420HC
-PakLite Skinner- 420HC
-Smidgen- 420HC
Burt Foster
-Dark Side- Damascus/Laminate, 2.5" x 6" / 3" x 7"
Bush Monkey
-Glacier EDC- O1, 3" x 7"
-Javelina- O1, 2.25" x 6"
-Mandrill- O1, 3" x 7"
Case
-Deer Hunter- Stainless, 2.25" x 7"
-3 1/8" Finn- Tru-Sharp, 3.125" x 6.5"
-Pheasant- Stainless, 3.25" x 7"
Charles May
-Bench Barlow- D2
-Bob White- D2
-Cow Killer- D2
-Fire Ant- D2
-Neck Knife- S30V
-Tallahatchie- D2
-Trace- D2
Chris Reeve
-Professional Soldier- S35VN, 3.38" x 7.5"
CJS
-Ironclad- O1, 3" x 6.5"
cKc
-1.0- O1(?), 3.2" x 7.26"
-Necker- O1, 1.99" x 3.95"
-Pen Knife- AEB-L, 2.75" x 6.23" / 3.02" x 6.48"
Cold Steel
-Bird & Trout Knife- AUS 8A
-Mini Tac- AUS 8A
-Pendleton Mini Hunter- VG-1
-Pro Guard- AUS 8A
-Secret Edge- AUS 8A
-Super Edge- AUS 8A
Condor
-BBT- 1075, 1 3/4" x 6"
-Bushbuddy- 1075, 3 3/16" x 6 3/4"
-Elegan- 1075, 2 3/32" x 5 3/16"
-Falco- 1075, 1 11/16" x 4"
-Fidelis- 1075, 2 3/16" x 5"
-Game Surgeon- 1075, 3 1/4" x 7 7/32"
-Tangara- 1075, 2 1/2" x 5 3/16"
-Windfang- 1075, 2 1/8" x 5 5/16"
-LEK- 1075, 3 1/8" x 7 1/8"
-Sub Tavian- 1075, 3 1/8" x 6 5/8"
-Bushcraft Basic (small)- 1075, 2" x 5 3/4"
-Mini Bushlore- 1075, 3" x 6 1/2"
Core Knife Co.
-Stubby- 1095, 1 7/8" x 4 1/2"
Coye
-Ridgeback- 154 CM, 3.25" x 6.5"
CRKT
-Alan Folts Minimalist- 5Cr15MoV, 2" x 5" / 2.13" x 5.13"
-Alan Folts S.P.E.W.- 5Cr15MoV, 3" x 6.25"
-Flavio Ikoma Keydashi- 1.4116, 2" x 3.75"
-Jon Graham Stubby Pocket Razel- 9Cr18MoV, 2.15" x 5.88"
-Raleigh Tabor Sparetool- 5Cr18MoV, 2" x 6.25"
-Russ Kommer Bear Claw- AUS 4, 2.38" x 5.75"
-Tom Krein Dogfish- 3Cr13, 2.25" x 5.25"
-Terry Renner Neckolas- 8Cr13MoV, 2" x 5.38"
Dirk Pinkerton
-Claw- 154 CM/S30V/customer's choice, 2.75" x 5.75"
-Wharning- S30V/customer's choice, 3.25" x 6.5"
Bob Dozier
-K-6 Companion- D2, 3" x 7"
-K-7 Slim Outdoorsman- D2, 3 3/8" x 7 1/2"
-K-9 Personal Utility- D2, 2 7/8" x 6 7/8"
-K-12 Small Game Skinner- D2, 2 3/8" x 6 7/16"
-K-13 Whittler- D2, 3" x 7"
-K-15 Neck Knife- D2, 2 11/16 x 6 3/16"
-K-20 Canoe- D2, 2 7/8" x 6 7/8"
-K-28 Dozier Personal- D2, 2 1/2" x 6 1/2"
-K-31 Arkansas Traveler- D2, 2 7/8" x 6 7/8"
-K-32 Personal Wharncliffe- D2, 3 1/8 x 7 1/8"
-K-33 Bird & Trout- D2, 2 7/8" x 6 3/4"
-K-35 Gentleman's Knife- D2, 3 1/8 x 7 1/8"
Emerson
-La Griffe- 154 CM, 1.75" x 4.9"
Entrek
-Lynx- 440C, 3" x 6.5"
ESEE
-Candiru- 1095, 2" x 5.13"
-Izula- 1095, 2 3/4" x 6.25"
-Izula II- 1095, 2 3/4" x 6.75"
Fehrman
-Short Stop- 3V, 2 1/4" x 4 3/8"
-Thru Hiker- 3V, 3" x 7.5"
Fiddleback Forge
-Bow Legged Joe- O1, 2.5" x 5.1"
-Bushboot- O1, 3.5" x 7" / 3.5" x 7 3/8"
-EDC- O1, 3.25" x 7"
-Hiking Buddy- O1, 3.125" x 7.5"
-Karda- O1, 3.5" x 6.5"
-Runt- O1, 2.25" x 5.5"
Gene Ingram (Too many to list. Majority are D2.)
http://www.geneingramknives.com/
Grayman
-Mini Dinka- 1095, 3" x 6.25"
Great Eastern Cutlery/Northfield/Tidioute
See this page.
Greco
-Dangler- 52100/Stainless Steel (type not specified), 3" x 7"
Helle
-Besseggen- Laminated Stainless
-Fire- Triple Laminated Stainless
-Ny Fjording- Laminated Stainless
-Nying- Laminated Stainless
-Speiderkniven- Stainless
Hess Knife Works
-Caper- 1095, 2 7/8" x 6 1/2"
-Muley- 1095, 3 5/8" x 7 1/2"
-Whitetail- 1095, 3 3/8" x 7 1/4"
J. Woytaz
-EDC- O1/Customer's Choice, 2 3/4" x 6" / 3" x 6.5"
Jantz Supply (These are actually blade blanks, meant to have full handles installed on them by a knifemaker. Paracord wraps work too, though.)
-Blackbuck- Ladder/Random/Twist Damascus
-Brown Bear- Ladder/Random/Twist Damascus
-Comanche Skinner- not listed
-Dolphin- 440C
-Fillet- not listed
-IRT Clip Point- not listed
-IRT Spear Point- stainless steel
-IRT Mini Skinner- proprietary carbon steel
-Kiowa Hunter- not listed
-Kodiak- not listed
-Monarch- high carbon stainless
-Patch- not listed
-Pattern 33- D2/440C/154CM
-Pattern 34- D2/440C/S30V
-Pattern 37- 1095/Damascus/D2/S30V/440C
-Pattern 38- 1095/D2/S30V
-Pattern 39- D2/440C
-Pattern 44- D2/440C
-Pecos- 8A
-Razorback- stainless steel
-Silver Hawk- not listed
-Wolf- stainless steel
Ka-Bar/Becker
-Becker BK11 Necker- 1095CV, 3 1/4" x 6 7/8"
-Becker BK13 Remora- 440A, 2 1/4" x 5 1/4"
-Becker BK14 EsKabar- 1095CV, 3 1/4" x 7"
-Ka Bar BESH Boga- 3Cr13, 2 3/16" x 5 1/2"
-Ka Bar/Johnson Adventure Piggyback- 5Cr13, 2 5/8" x 6"
-Ka Bar Little Fin- DIN 1.4116, 3 5/8" x 7"
-Ka Bar TDI- AUS 8A, 2 5/16" x 5 5/8"
Katz
-Kitty Caper- XT-80, 2 3/8" x 7"
Kellam
-Boy’s Tommi
-Cleavage
-French Small
-KnifeKuksa
-Leatherman Patch Small
-Mini French
-Pocket Knife
-Viking
-Viking Spiral
http://www.kellamknives.com/index.php?main_page=index&cPath=1_33_83_90
Kanetsune
-Hane- White Steel, 1.97" x 4.33"
-Hayashi- White Steel, 2.56" x 6.69"
-Hi- White Steel, 2.95" x 7.09"
-Kaze- White Steel, 2.56" x 6.5"
-Yama- White Steel, 3.15" x 7.28"
-Yume- Blue Steel(Damascus), 2.56" x 5.91"
Kershaw
-Field Knife- 14C28N, 3.25" x 7.25"
-Mini Skinner- 14C28N, 3.25" x 7.375"
-Skyline Fixed Blade- 14C28N, 2" x 4 3/4"
Kevin Wilkins
-Mini Thorn Classic- 14c28n, 2.95" x 5.9"
-Mini Thorn Tactical- 14c28n, 2.95" x 5.9"
-Mytuko Mini- 1.4116, 2.87" x 6.3"
Kizlyar Supreme
-Amigo- D2/AUS 8, 2.7" x 5.24"
Koster
-K6 Karda- 3V, 3.5" x 7"
-Scout- 3V, 2 1/2" x 5 1/2"
Les Voorhies
-Mini X3- CPM 154, 1.25" x 3.15"
Medford
-Ghost- D2, 1.7" x 6"
-Karambit- D2, 3" x 7"
-Micro Tanto- D2, 2.3" x 4.9"
-Raptor- D2, 1.9" x 4.4"
-Talon- D2, 1.5" x 4"
-Tanpup- D2, 2.75" x 6.5"
Meyerco
-2pc Charles Sauer Caping Knife Set
-Charles Sauer All-Purpose Knife
-Charles Sauer Diker
-Charles Sauer Little 5 Hunter
-Dirk Pinkerton BESH Wedge
-Dirk Pinkerton Dew Claw
-Dirk Pinkerton Focus
-Dirk Pinkerton Paramecium
-Dirk Pinkerton Thumb Drive
-Dirk Pinkerton Thumb Dive II
-Dirk Pinkerton Variable Broadhead
-Dirk Pinkerton Variable Claw
-Double edge
-Guppy
-Karambit
-Neck Knife
-Randall King Tsavo
Moki
-Banff- VG-10, 2.25" x 6.125" / 3.125" x 7" / 3.5" x 7.5"
-Trout & Bird- AUS 8, 7 1/4" OAL
Mora
-#2/0- high carbon, 3" x 6 1/2"
-#120- laminated carbon, 2 1/4"
-#122- laminated carbon, 2 3/8" x 6 5/8"
-#920- laminated carbon, 2 1/4"
-Installer- stainless, 1 3/4" x 6 1/4"
-Punch Knife- stainless, 2 5/8" x 7 1/4"
Muela
-Bison- 440, 3 1/2" x 7"
-Cobra 8- Moly-Vanadium, 3 1/2" x 7"
-Colibri- Moly-Vanadium, 3 1/2" x 7 1/8"
-Gazapo 8A- Moly-Vanadium, 3" x 6 1/4"
-Ibex- Moly-Vanadium, 6.75" OAL
-Mouse- Moly-Vanadium, 2 1/4" x 5 1/4"
-Mouse 7A- Moly-Vanadium, 3" x 6"
-Piranha- Moly-Vanadium, 3" x 7"
-SH 7- Moly-Vanadium, 2 3/4" x 7 1/4"
-SH 8- Moly-Vanadium, 2 3/4" x 7 1/4"
Nemesis
-2 Zero- CPM 154, 2" x 4 15/16"
-Afterburner- 9Cr13, 2 1/4" x 5 1/4"
-Arch Ally- S30V, 2 5/8" x 6"
-Hellion- VG-10, 1 5/8" x 4 1/8"
Northwoods
-Mini Caper- D2, 2 3/4" x 6 1/8"
-Scagel Bird and Trout- 1095, 3.5"
Ontario
-Little Bird- 1095, 1.75" x 4.15"
-Old Hickory Paring Knife- 1095, 3 1/4" x 6 7/8"
-Ranger Neck Knife- 440 Stainless, 2.75" x 7"
-Ranger Silver Skeleton Knife- 440 Stainless, 2.7" x 6"
Perceval
-Sgian Dubh- 12C27, 3.9" x 7.6"
-Skeleton- 12C27, 3" x 7.5"
-Trapper- 12C27, 2.5" x 6.7"
Phil Rose
-Last Ditch- 6AL4V Ti
-PSK-5- S30V
-Scrapper- S30V
-Thorn- S30V
Pro Tool
-Hunt Utility Knife- carbon steel, 3" x 7"
-Praesidio Compact- 1095, 2 1/2" x 6"
Queen
-Light Hunter Canoe Knife- D2, 3.875" x 7.5"
-Light Hunter Trout Knife- 420HC, 3" x 6.375"
ROSarms(Rosorujie)
-Beaver- 110x18, 2 1/4" x 4 3/4"
Roselli
-Bear Claw- UHC, 2.25" x 6.75"
-Grandfather Knife- Carbon steel (hand forged), 2.75" x 7"
-Grandmother Knife- Carbon steel (hand forged), 2 1/4" x 6"
Rough Rider
-Blue Shark Dive Knife- Stainless, 7" OAL
-Hunter's Buddy Series- Stainless, 6", 6.25", and 7" OAL
-Little Mustang Hunter- 440A, 4.25" OAL
-Mini Neck Knife- 440, 4" OAL
-Small Hunter series- Stainless, 6.5", 7", and 7.75" OAL
-Small Skinner- Stainless, 3.25" x 6.25"
-Ulu Skinner- Stainless, 4" x 6.75"
-Wolverine- 440A, 7.125" OAL
-
SCAR Blades
-Apache- 1095, 3" x 7"
-Grizzly- 1095, 3" x 7 1/8"
-Lil Hornet- 1095, 2 1/2" x 7"
-PAK-IT- not listed
-Shark Bite- 1095, 2.48" x 6.625"
-Talon- not listed
Schrade
-Extreme Survival Neck Knife- 1095, 3.1" x 6.6"
-Littlefinger- Stainless Steel, 2 3/4" x 6 5/8"
-Tactical Neck Knife- 9Cr18MoV, 3.1" x 7"
Scrapyard
-Scrapivore- SR101, 2 3/4" x 6 1/2"
Sean Kendrick
-Minion- 154CM/S30V, 2 3/4" x 6 7/8"
Shadow Tech
-Backup- 1095, 3" x 6"
-Carbon Fiber Neck Knife- 6" OAL
-Hiker- 1095, 3" x 6"
SOG
-Jason Brous Snarl- 9Cr18MoV, 2.3" x 4.3"
Spartan Blades
-Enyo- S35VN, 2.9" x 6.25"
-Phobos- S35VN, 2.75 x 6.5"
Spyderco
-Enuff- VG 10, 2.75" x 6.75"
Strider
-DB- S30V, 3.125" x 7.25"
-ED- S30V, 2.75" x 6.88"
-SA- S30V, 3" x 7.25"
-SLCC- S30V, 3.5" x 7"
Svord
-EDC Hiker- L6, 3" x 6 1/8"
Timberline
-+B Design Neck Angel- 440, 2 7/8" x 5 7/8"
-Lightfoot Mini PIT BULL- AUS 6, 3" x 6.6"
TOPS(Too many to list them all. The vast majority are in 1095, with some 5160, 154CM, and a few other steels thrown in for good measure.)
http://www.topsknives.com/index.php?cPath=1&osCsid=4f4ojd3t0mvsco7gcpsdoinrv0
Tracker Dan
-Bloodshark- 154 CM, 3.25" x 6.75"
TT PockeTTools
-Pocket Edge- S30V, 1 7/8" x 3 5/8"
Viper
-Skinner- 1.4116, 2 1/2" x 5 1/4"
Watanabe Blade
http://watanabeblade.com/english/special/index.htm
White River
-Backpacker- S30V, 3.5" x 6.75"
-Caper- S30V, 3.5" x 6.75"
-Knucklehead- S30V, 2.875" x 6"
-Scout- S30V, 3.5" x 6.75"
Wilson Tactical
-Model 13- D2, 3.5" x 7.375"
5.11
-Tactical Sidekick- AUS 8, OAL 5.5"
I've noticed that there's been a fair amount of interest in EDC fixed blades lately. I really like the category and already had a short list on my computer, so I figured I might as well make it a bit more thorough and post it here. Hopefully this'll help a few people decide on their next purchase, show them a manufacturer they've never heard about before, e.t.c. I know that everyone's definitions of edc-able are different; I tend to lean towards smaller knives. Most knives on this list are below 7" OAL, which was my unofficial size limit.
If I missed anything, just say so and I'll edit the OP to add it.
The way the blades are shown, are:
Company names bolded and listed alphabetically
-Name of knife- Steel(s) the knife come(s) in, Blade Length x Overall Length
If I could only find the blade length, only blade length will be shown. If I could only find the OAL length, the OAL measure will be given, with the acronym OAL behind it to signify that it's the overall, (not blade,) length.
A.G. Russell
-Bird & Trout- D2/AUS 8/ATS 34, 3" x 6 3/4"
-ShopMade Caper- 154 CM, 3 1/16" x 6"
-Ceramic Neck Knife- Zirconium Dioxide(Ceramic), 2 1/2" x 5 1/4"
-Hunter Scalpel- AUS 10, 2 1/2" x 4 3/4"
-Woodswalker- AUS 8, 2 3/8" x 6"
Alan Folts
-Baby Bear- ATS 34/154 CM, 1 1/2"
-Minimalist- CPM 154, 2"
-SPEW- ATS 34, 2 3/4"
Arno Bernard
-Dassie- N690, 2 3/8" x 5"
-Gecko- N690, 2 1/2" x 5 1/2"
-Jackal- N690, 2 3/4" x 6 5/8"
-Meerkat- N690, 2 1/8" x 5"
-Porcupine- N690, 2 3/4" x 5 7/8"
-Raven- N690, 2 3/4" x 6 3/8"
-Squirrel- N690, 2 1/2" x 5 7/8"
ARS
-Shanghai Shank- 440C, 2" x 5"
Bark River(Many of these knives have been produced in multiple steels, even if they may not be listed as such.)
-Bravo Necker- 12C27/3V, 2.5" x 6.25"
-City Knife- CPM 154, 2.6" x 6.125"
-EPK- CPM 154, 2" x 4"
-Essential- M4, 2.7" x 6.2"
-Huntsman- A2, 3.25" x 7"
-Lil' Canadian- 3V, 3.25" x 7"
-Little Caper- A2, 2.75 x 5.75"
-Little Carver- 3V, 2.72" x 5.74"
-Little Creek- A2, 2.65" x 5.5"
-Mikro Canadian- 12C27/154 CM, 1.75" x 5.5"
-Mini Canadian- A2/3V, 2.2" x 6"
-Mini Fox River- A2/3V, 2.9" x 6.65"
-Pocket Bravo- 154 CM, 1.38" x 4.9"
-Pro Scalpel- 52100/3V, 2.25" x 5"
-PSK- 154 CM/12C27, 2.18" x 5.15"
-Woodland Special- A2, 3.2" x 6.87"
Bastinelli
-Cal Persane- 12C27
-Le Cal- D2
-Moon's Kiss- 12C27
-Rancunier- 12C27
Benchmade/HD/HK/Lone Wolf
-Benchmade Snody Activator- D2
-Bone Collector Fixed Skinner- D2
-Harley Davidson Tether Knife- 440C
-H&K Instigator- AUS 8
-Lone Wolf Caper- N680
-Lone Wolf Hard Way- N680
Benchmark
-3” Ceramic Parer- Zirconia Ceramic
-Backpacker- Stainless Steel
-Rucksack- Stainless Steel
Black Bear
-ACE- S30V
Blackhawk
-Kallista II- AUS 8, OAL 7.3"
Blackjack
-155 Neck Knife- 154 CM, 2.75" x 6.38"
-Model 12- A2, 3.75" x 7"
Blind Horse
-Bird & Trout Classic- 440C
-Brookie- O1
-Brumby Lite- O1
-Bushbaby- O1
-Drover- O1
-Frontier First- O1
-Frontier Trapper- O1
-Frontier Valley- O1
-Lil’ MUK- O1
-Maverick Colt- O1
-Nessy Necker- O1
-Small Workhorse- D2
-Tiger Knapp/Snap Knapp- O1
-Woodsman- O1
Boker (Collabs first, in-house designs at the end.)
-Andy Fitz Neck Knife- 440C
-Bud Nealy Illumination- 440C
-CLB EDIT- 440C
-CLB Microcom- 440C
-CLB Rescom- AUS 8
-CLB RNR- 440C
-CLB SubCom Fixed Blade- 440C, 2 3/8" x 5 1/2"
-Doug Hartsook Featherweight- Carbon Fiber
-Doug Hartsook Nub- 440C
-Dozier Arkansas Traveler- AUS 8
-Jared Price Toucan- 440C
-Jimmy Burke Tunnel Rat- 440C
-Jim Burke SOB- 12c27
-Mickey Yurco Yurco- 440C
-Miltner Adams MA-2- 440C
-Neil Blackwood Minx- S35VN
-Newton Martin K-BIT- 440C
-Peter Farkas Magyar- 440C
-Raimund Lhotak Rambler- 440C
-Steffen Bender Bender- 440C
-Todd Begg Kiridashi- 440C
-Tom Krein Grasshopper- 440C
-Tom Krein Pocket Bowie- 440C
-Tom Krein PSK Outdoor Knife- 440C
-Vox Gnome- 12c27
-Vox Mega Mini- 440C
-Vox Nippon Necker- 440C
-Vox Pry Mate- N690BO
-Vox Pry Mini- N690BO
-Vox Rhino- 12c27
-Vox Rhino Calf- 440C
-Vox SanYouGo Utility Knife- 12c27
-Wilson Tactical Cop Tool- 440C
-Boker Amico- N690BO
-Boker Beauty- N690BO
-Boker Arbolito Caper- 440A
-Boker Plus Cera-Neck- Ceramic
-Boker Plus Gent’s Scalpel- 440C
-Boker Magnum Escape Knife- 420
-Boker Magnum Mate Knife- 440
-Boker Magnum Neck Flash- 440
Branton Mid-Techs
-Multi Mission Neck Knife- CPM 154, 3" x 6"
-Red Neck Knives #1 and #3- CPM 154, 3" x 5.5"
-Red Neck Knives #2 and #4- CPM 154, 2.5" x 5"
Brous Blades
-Silent Soldier- D2
-SS Ranger- D2
Browning
-Deterrent- 154CM
-Extreme Mountain Hunter- 12c27
-Hunter, For Her- 12c27
-Lil' Bit Small Hunter- 12c27
-Tracer Neck Dagger- 440 Stainless/154 CM
Buck
-ErgoHunter Waterfowler/Small Game- 420HC/12c27/S30V
-Hartsook Ultralite- S30V
-Maya Kaala- S30V
-Mini Alpha Hunter- 420HC
-PakLite Caper- 420HC
-PakLite Skinner- 420HC
-Smidgen- 420HC
Burt Foster
-Dark Side- Damascus/Laminate, 2.5" x 6" / 3" x 7"
Bush Monkey
-Glacier EDC- O1, 3" x 7"
-Javelina- O1, 2.25" x 6"
-Mandrill- O1, 3" x 7"
Case
-Deer Hunter- Stainless, 2.25" x 7"
-3 1/8" Finn- Tru-Sharp, 3.125" x 6.5"
-Pheasant- Stainless, 3.25" x 7"
Charles May
-Bench Barlow- D2
-Bob White- D2
-Cow Killer- D2
-Fire Ant- D2
-Neck Knife- S30V
-Tallahatchie- D2
-Trace- D2
Chris Reeve
-Professional Soldier- S35VN, 3.38" x 7.5"
CJS
-Ironclad- O1, 3" x 6.5"
cKc
-1.0- O1(?), 3.2" x 7.26"
-Necker- O1, 1.99" x 3.95"
-Pen Knife- AEB-L, 2.75" x 6.23" / 3.02" x 6.48"
Cold Steel
-Bird & Trout Knife- AUS 8A
-Mini Tac- AUS 8A
-Pendleton Mini Hunter- VG-1
-Pro Guard- AUS 8A
-Secret Edge- AUS 8A
-Super Edge- AUS 8A
Condor
-BBT- 1075, 1 3/4" x 6"
-Bushbuddy- 1075, 3 3/16" x 6 3/4"
-Elegan- 1075, 2 3/32" x 5 3/16"
-Falco- 1075, 1 11/16" x 4"
-Fidelis- 1075, 2 3/16" x 5"
-Game Surgeon- 1075, 3 1/4" x 7 7/32"
-Tangara- 1075, 2 1/2" x 5 3/16"
-Windfang- 1075, 2 1/8" x 5 5/16"
-LEK- 1075, 3 1/8" x 7 1/8"
-Sub Tavian- 1075, 3 1/8" x 6 5/8"
-Bushcraft Basic (small)- 1075, 2" x 5 3/4"
-Mini Bushlore- 1075, 3" x 6 1/2"
Core Knife Co.
-Stubby- 1095, 1 7/8" x 4 1/2"
Coye
-Ridgeback- 154 CM, 3.25" x 6.5"
CRKT
-Alan Folts Minimalist- 5Cr15MoV, 2" x 5" / 2.13" x 5.13"
-Alan Folts S.P.E.W.- 5Cr15MoV, 3" x 6.25"
-Flavio Ikoma Keydashi- 1.4116, 2" x 3.75"
-Jon Graham Stubby Pocket Razel- 9Cr18MoV, 2.15" x 5.88"
-Raleigh Tabor Sparetool- 5Cr18MoV, 2" x 6.25"
-Russ Kommer Bear Claw- AUS 4, 2.38" x 5.75"
-Tom Krein Dogfish- 3Cr13, 2.25" x 5.25"
-Terry Renner Neckolas- 8Cr13MoV, 2" x 5.38"
Dirk Pinkerton
-Claw- 154 CM/S30V/customer's choice, 2.75" x 5.75"
-Wharning- S30V/customer's choice, 3.25" x 6.5"
Bob Dozier
-K-6 Companion- D2, 3" x 7"
-K-7 Slim Outdoorsman- D2, 3 3/8" x 7 1/2"
-K-9 Personal Utility- D2, 2 7/8" x 6 7/8"
-K-12 Small Game Skinner- D2, 2 3/8" x 6 7/16"
-K-13 Whittler- D2, 3" x 7"
-K-15 Neck Knife- D2, 2 11/16 x 6 3/16"
-K-20 Canoe- D2, 2 7/8" x 6 7/8"
-K-28 Dozier Personal- D2, 2 1/2" x 6 1/2"
-K-31 Arkansas Traveler- D2, 2 7/8" x 6 7/8"
-K-32 Personal Wharncliffe- D2, 3 1/8 x 7 1/8"
-K-33 Bird & Trout- D2, 2 7/8" x 6 3/4"
-K-35 Gentleman's Knife- D2, 3 1/8 x 7 1/8"
Emerson
-La Griffe- 154 CM, 1.75" x 4.9"
Entrek
-Lynx- 440C, 3" x 6.5"
ESEE
-Candiru- 1095, 2" x 5.13"
-Izula- 1095, 2 3/4" x 6.25"
-Izula II- 1095, 2 3/4" x 6.75"
Fehrman
-Short Stop- 3V, 2 1/4" x 4 3/8"
-Thru Hiker- 3V, 3" x 7.5"
Fiddleback Forge
-Bow Legged Joe- O1, 2.5" x 5.1"
-Bushboot- O1, 3.5" x 7" / 3.5" x 7 3/8"
-EDC- O1, 3.25" x 7"
-Hiking Buddy- O1, 3.125" x 7.5"
-Karda- O1, 3.5" x 6.5"
-Runt- O1, 2.25" x 5.5"
Gene Ingram (Too many to list. Majority are D2.)
http://www.geneingramknives.com/
Grayman
-Mini Dinka- 1095, 3" x 6.25"
Great Eastern Cutlery/Northfield/Tidioute
See this page.
Greco
-Dangler- 52100/Stainless Steel (type not specified), 3" x 7"
Helle
-Besseggen- Laminated Stainless
-Fire- Triple Laminated Stainless
-Ny Fjording- Laminated Stainless
-Nying- Laminated Stainless
-Speiderkniven- Stainless
Hess Knife Works
-Caper- 1095, 2 7/8" x 6 1/2"
-Muley- 1095, 3 5/8" x 7 1/2"
-Whitetail- 1095, 3 3/8" x 7 1/4"
J. Woytaz
-EDC- O1/Customer's Choice, 2 3/4" x 6" / 3" x 6.5"
Jantz Supply (These are actually blade blanks, meant to have full handles installed on them by a knifemaker. Paracord wraps work too, though.)
-Blackbuck- Ladder/Random/Twist Damascus
-Brown Bear- Ladder/Random/Twist Damascus
-Comanche Skinner- not listed
-Dolphin- 440C
-Fillet- not listed
-IRT Clip Point- not listed
-IRT Spear Point- stainless steel
-IRT Mini Skinner- proprietary carbon steel
-Kiowa Hunter- not listed
-Kodiak- not listed
-Monarch- high carbon stainless
-Patch- not listed
-Pattern 33- D2/440C/154CM
-Pattern 34- D2/440C/S30V
-Pattern 37- 1095/Damascus/D2/S30V/440C
-Pattern 38- 1095/D2/S30V
-Pattern 39- D2/440C
-Pattern 44- D2/440C
-Pecos- 8A
-Razorback- stainless steel
-Silver Hawk- not listed
-Wolf- stainless steel
Ka-Bar/Becker
-Becker BK11 Necker- 1095CV, 3 1/4" x 6 7/8"
-Becker BK13 Remora- 440A, 2 1/4" x 5 1/4"
-Becker BK14 EsKabar- 1095CV, 3 1/4" x 7"
-Ka Bar BESH Boga- 3Cr13, 2 3/16" x 5 1/2"
-Ka Bar/Johnson Adventure Piggyback- 5Cr13, 2 5/8" x 6"
-Ka Bar Little Fin- DIN 1.4116, 3 5/8" x 7"
-Ka Bar TDI- AUS 8A, 2 5/16" x 5 5/8"
Katz
-Kitty Caper- XT-80, 2 3/8" x 7"
Kellam
-Boy’s Tommi
-Cleavage
-French Small
-KnifeKuksa
-Leatherman Patch Small
-Mini French
-Pocket Knife
-Viking
-Viking Spiral
http://www.kellamknives.com/index.php?main_page=index&cPath=1_33_83_90
Kanetsune
-Hane- White Steel, 1.97" x 4.33"
-Hayashi- White Steel, 2.56" x 6.69"
-Hi- White Steel, 2.95" x 7.09"
-Kaze- White Steel, 2.56" x 6.5"
-Yama- White Steel, 3.15" x 7.28"
-Yume- Blue Steel(Damascus), 2.56" x 5.91"
Kershaw
-Field Knife- 14C28N, 3.25" x 7.25"
-Mini Skinner- 14C28N, 3.25" x 7.375"
-Skyline Fixed Blade- 14C28N, 2" x 4 3/4"
Kevin Wilkins
-Mini Thorn Classic- 14c28n, 2.95" x 5.9"
-Mini Thorn Tactical- 14c28n, 2.95" x 5.9"
-Mytuko Mini- 1.4116, 2.87" x 6.3"
Kizlyar Supreme
-Amigo- D2/AUS 8, 2.7" x 5.24"
Koster
-K6 Karda- 3V, 3.5" x 7"
-Scout- 3V, 2 1/2" x 5 1/2"
Les Voorhies
-Mini X3- CPM 154, 1.25" x 3.15"
Medford
-Ghost- D2, 1.7" x 6"
-Karambit- D2, 3" x 7"
-Micro Tanto- D2, 2.3" x 4.9"
-Raptor- D2, 1.9" x 4.4"
-Talon- D2, 1.5" x 4"
-Tanpup- D2, 2.75" x 6.5"
Meyerco
-2pc Charles Sauer Caping Knife Set
-Charles Sauer All-Purpose Knife
-Charles Sauer Diker
-Charles Sauer Little 5 Hunter
-Dirk Pinkerton BESH Wedge
-Dirk Pinkerton Dew Claw
-Dirk Pinkerton Focus
-Dirk Pinkerton Paramecium
-Dirk Pinkerton Thumb Drive
-Dirk Pinkerton Thumb Dive II
-Dirk Pinkerton Variable Broadhead
-Dirk Pinkerton Variable Claw
-Double edge
-Guppy
-Karambit
-Neck Knife
-Randall King Tsavo
Moki
-Banff- VG-10, 2.25" x 6.125" / 3.125" x 7" / 3.5" x 7.5"
-Trout & Bird- AUS 8, 7 1/4" OAL
Mora
-#2/0- high carbon, 3" x 6 1/2"
-#120- laminated carbon, 2 1/4"
-#122- laminated carbon, 2 3/8" x 6 5/8"
-#920- laminated carbon, 2 1/4"
-Installer- stainless, 1 3/4" x 6 1/4"
-Punch Knife- stainless, 2 5/8" x 7 1/4"
Muela
-Bison- 440, 3 1/2" x 7"
-Cobra 8- Moly-Vanadium, 3 1/2" x 7"
-Colibri- Moly-Vanadium, 3 1/2" x 7 1/8"
-Gazapo 8A- Moly-Vanadium, 3" x 6 1/4"
-Ibex- Moly-Vanadium, 6.75" OAL
-Mouse- Moly-Vanadium, 2 1/4" x 5 1/4"
-Mouse 7A- Moly-Vanadium, 3" x 6"
-Piranha- Moly-Vanadium, 3" x 7"
-SH 7- Moly-Vanadium, 2 3/4" x 7 1/4"
-SH 8- Moly-Vanadium, 2 3/4" x 7 1/4"
Nemesis
-2 Zero- CPM 154, 2" x 4 15/16"
-Afterburner- 9Cr13, 2 1/4" x 5 1/4"
-Arch Ally- S30V, 2 5/8" x 6"
-Hellion- VG-10, 1 5/8" x 4 1/8"
Northwoods
-Mini Caper- D2, 2 3/4" x 6 1/8"
-Scagel Bird and Trout- 1095, 3.5"
Ontario
-Little Bird- 1095, 1.75" x 4.15"
-Old Hickory Paring Knife- 1095, 3 1/4" x 6 7/8"
-Ranger Neck Knife- 440 Stainless, 2.75" x 7"
-Ranger Silver Skeleton Knife- 440 Stainless, 2.7" x 6"
Perceval
-Sgian Dubh- 12C27, 3.9" x 7.6"
-Skeleton- 12C27, 3" x 7.5"
-Trapper- 12C27, 2.5" x 6.7"
Phil Rose
-Last Ditch- 6AL4V Ti
-PSK-5- S30V
-Scrapper- S30V
-Thorn- S30V
Pro Tool
-Hunt Utility Knife- carbon steel, 3" x 7"
-Praesidio Compact- 1095, 2 1/2" x 6"
Queen
-Light Hunter Canoe Knife- D2, 3.875" x 7.5"
-Light Hunter Trout Knife- 420HC, 3" x 6.375"
ROSarms(Rosorujie)
-Beaver- 110x18, 2 1/4" x 4 3/4"
Roselli
-Bear Claw- UHC, 2.25" x 6.75"
-Grandfather Knife- Carbon steel (hand forged), 2.75" x 7"
-Grandmother Knife- Carbon steel (hand forged), 2 1/4" x 6"
Rough Rider
-Blue Shark Dive Knife- Stainless, 7" OAL
-Hunter's Buddy Series- Stainless, 6", 6.25", and 7" OAL
-Little Mustang Hunter- 440A, 4.25" OAL
-Mini Neck Knife- 440, 4" OAL
-Small Hunter series- Stainless, 6.5", 7", and 7.75" OAL
-Small Skinner- Stainless, 3.25" x 6.25"
-Ulu Skinner- Stainless, 4" x 6.75"
-Wolverine- 440A, 7.125" OAL
-
SCAR Blades
-Apache- 1095, 3" x 7"
-Grizzly- 1095, 3" x 7 1/8"
-Lil Hornet- 1095, 2 1/2" x 7"
-PAK-IT- not listed
-Shark Bite- 1095, 2.48" x 6.625"
-Talon- not listed
Schrade
-Extreme Survival Neck Knife- 1095, 3.1" x 6.6"
-Littlefinger- Stainless Steel, 2 3/4" x 6 5/8"
-Tactical Neck Knife- 9Cr18MoV, 3.1" x 7"
Scrapyard
-Scrapivore- SR101, 2 3/4" x 6 1/2"
Sean Kendrick
-Minion- 154CM/S30V, 2 3/4" x 6 7/8"
Shadow Tech
-Backup- 1095, 3" x 6"
-Carbon Fiber Neck Knife- 6" OAL
-Hiker- 1095, 3" x 6"
SOG
-Jason Brous Snarl- 9Cr18MoV, 2.3" x 4.3"
Spartan Blades
-Enyo- S35VN, 2.9" x 6.25"
-Phobos- S35VN, 2.75 x 6.5"
Spyderco
-Enuff- VG 10, 2.75" x 6.75"
Strider
-DB- S30V, 3.125" x 7.25"
-ED- S30V, 2.75" x 6.88"
-SA- S30V, 3" x 7.25"
-SLCC- S30V, 3.5" x 7"
Svord
-EDC Hiker- L6, 3" x 6 1/8"
Timberline
-+B Design Neck Angel- 440, 2 7/8" x 5 7/8"
-Lightfoot Mini PIT BULL- AUS 6, 3" x 6.6"
TOPS(Too many to list them all. The vast majority are in 1095, with some 5160, 154CM, and a few other steels thrown in for good measure.)
http://www.topsknives.com/index.php?cPath=1&osCsid=4f4ojd3t0mvsco7gcpsdoinrv0
Tracker Dan
-Bloodshark- 154 CM, 3.25" x 6.75"
TT PockeTTools
-Pocket Edge- S30V, 1 7/8" x 3 5/8"
Viper
-Skinner- 1.4116, 2 1/2" x 5 1/4"
Watanabe Blade
http://watanabeblade.com/english/special/index.htm
White River
-Backpacker- S30V, 3.5" x 6.75"
-Caper- S30V, 3.5" x 6.75"
-Knucklehead- S30V, 2.875" x 6"
-Scout- S30V, 3.5" x 6.75"
Wilson Tactical
-Model 13- D2, 3.5" x 7.375"
5.11
-Tactical Sidekick- AUS 8, OAL 5.5"
Last edited:
