- Joined
- May 9, 2010
- Messages
- 69
Well this started as a neck knife but turned into Something a little brighter. I'll show you the original design and then what it has turned into. The lightsaber is just a prototype at the moment. The idea was that the knife could be removed from the sheath easily from both lefty and righty. The tritium can be viewed from front or back in the sheath and should make for cutting in the dark a little easier. The knife is pretty small but can still be held by the handle or choked up on. The slot for the tritium isn't the most perfect but No mill to play with here. Also the sheath on the cord wrapped one was just a prototype and needs to be remade. I'll let the pictures speak
64/al TI
Carbidized anodized
Titanium pins and tubes.
G10
White tritium bar glued in with Norland 61
By apphoto at 2010-05-16
By apphoto at 2010-05-16
By apphoto at 2010-05-21
By apphoto at 2010-05-21
By apphoto at 2010-05-21
By apphoto at 2010-05-21
64/al TI
Carbidized anodized
Titanium pins and tubes.
G10
White tritium bar glued in with Norland 61
By apphoto at 2010-05-16
By apphoto at 2010-05-16
By apphoto at 2010-05-21
By apphoto at 2010-05-21
By apphoto at 2010-05-21
By apphoto at 2010-05-21
