Anorexic BOSS Street Shipping UPDATE!!!. . . .

Jerry Busse

Jerry Busse

Moderator
Joined
Aug 20, 1999
Messages
12,080
Well, we shipped quite a few of the Anorexic BOSS Streets out and then got hit with a calamity of monumental proportions!!!!!!:eek:

Here's what happened. . . . We have separate chillers on our Laser engravers. This makes each of them a stand alone unit. That was done to prevent us from ever having an issue with both of them being down at the same time. . . . Well, as luck would have it, we had an electric outage during some high winds last week. No big deal, so we thought. Wrong! This outage sent some sort of an electrical surge through the laser room that blew out the protective fuses in the control panels of both chillers. We didn't even know that there were protective fuses in the control panels of the chillers!!! :eek: :confused:

Here's where it got confusing. . . This little fuse did not stop the chillers from operating. . . it only stopped the compressors inside from operating!. . . So, we were still circulating water through the lasers but it was not being cooled. A few cycles later and the water was getting super heated and blowing laser bulbs like they were free!!!! :eek:

An HVAC guy, two different electricians, and 5 days later we discovered that 2 tiny little fuses were causing the problem!

We ordered the fuses in and are now lasering to beat the band!:thumbup:

So, all remaining paid for CABS, SCABS, and LCABS will be shipped by Tuesday!!!!!:thumbup:

Let's Drink!!!!! :thumbup:

Jerry :D

.
 
Jerry Busse said:




An HVAC guy, two different electricians, and 5 days later we discovered that 2 tiny little fuses were causing the problem!

Let's Drink!!!!! :thumbup:

Jerry :D

.
Click to expand...

I bet a plumber wudda solved that in 10 minutes! :D

Glad you didnt have a nuclear shop meltdown.
Thanks for the update.
 
If all else fails, hit it with a wrench!

Thanks for the update :)
 
You know, I have one simple request. And that is to have sharks with frickin' laser beams attached to their heads! Now evidently my cycloptic colleague informs me that that cannot be done. Ah, would you remind me what I pay you people for, honestly? Throw me a bone here! What do we have?

dr-evil.jpg
 
Thanks for the update Boss!

I'm ready when you are :thumbup: Hopefully # 1 made it out before the crash
 
.


Jerry, You should have just pulled a "Skunk", made them sterile and called them a "Secret Mission Unmarked Tactical" or "SMUT" knife for short. They would sell like crazy and be one of the most collectable editions!!! :eek:


.
 
Jerry Busse said:
Well, we shipped quite a few of the Anorexic BOSS Streets out and then got hit with a calamity of monumental proportions!!!!!!:eek:

Here's what happened. . . . We have separate chillers on our Laser engravers. This makes each of them a stand alone unit. That was done to prevent us from ever having an issue with both of them being down at the same time. . . . Well, as luck would have it, we had an electric outage during some high winds last week. No big deal, so we thought. Wrong! This outage sent some sort of an electrical surge through the laser room that blew out the protective fuses in the control panels of both chillers. We didn't even know that there were protective fuses in the control panels of the chillers!!! :eek: :confused:

Here's where it got confusing. . . This little fuse did not stop the chillers from operating. . . it only stopped the compressors inside from operating!. . . So, we were still circulating water through the lasers but it was not being cooled. A few cycles later and the water was getting super heated and blowing laser bulbs like they were free!!!! :eek:

An HVAC guy, two different electricians, and 5 days later we discovered that 2 tiny little fuses were causing the problem!

We ordered the fuses in and are now lasering to beat the band!:thumbup:

So, all remaining paid for CABS, SCABS, and LCABS will be shipped by Tuesday!!!!!:thumbup:

Let's Drink!!!!! :thumbup:

Jerry :D

.
Click to expand...

Better order some extra fuses:D:thumbup:
 
Bad news boss.

I hate when my lasers break!

Here is the solution


Just take a sharp carbide etcher, and free hand them. Be sure to drink a ton first, so they turn out super sweet!
 
You know the Boss is telling the truth because you just can't make something like that up :D
I'll take a sterile SCAB please =)
Thanks for the update.
 
With all the drinking there. you have an unlimited source of cooling. Just pee on the lasers. You will have to take it in shifts, and it will stink to high heaven (any one who has pissed out a camp fire, or peed on hot iron can attest to this.........don't ask).
 
Liu Kang said:
You know the Boss is telling the truth because you just can't make something like that up :D
I'll take a sterile SCAB please =)
Thanks for the update.
Click to expand...


Well, that's a better story than the one Lexi told me about everyone in the Shop getting the flu last week, after Jerry had made them all get the flu shot.
 
resinguy said:
Well, that's a better story than the one Lexi told me about everyone in the Shop getting the flu last week, after Jerry had made them all get the flu shot.
Click to expand...

That's true also. . . Garth was out most of the week along with half the crew, and now Amy-0 has it and sounds like a man, baby!!!!. . . :eek:
Everyone got the flu shot because one of our favorite girls here is pregnant with twins!!!!!!! :thumbup:

It's just been one of those weeks!!!!!! :eek:

I'm Drinkin'. . . :thumbup:

Jerry :D

.
 
You all can be healed of ailment and kiss Murphey's Law goodbye if you just Bring the MUK.;):D
 
Amy sounds like a "Man Baby"?... :eek::eek:

I hope all the sickly ones get better soon...
 
You must log in or register to reply here.
Back
Top