Another Talonite question

Joined
May 10, 1999
Messages
2,769
Hi all,

This might be a little more scientific question
smile.gif
.

The Talonite is a Cobalt Chromium alloy, right? It has about 28-32% of Chromium, 0,8-1.5% of Carbon, some other elements (not relevant right now) and the balance is Cobalt.

The Chromium is there in form of Chromium Carbides (Cr3C2). The ratio between Cr and C in carbides is about 6.5 to 1. It means that for 1% of Carbon, there should be 6.5% of Chromium. But the Chromium content of Talonite is much higher. Does that mean that there is Chromium in different form? If yes, why? Only carbides actually cut. Can someone explain this?

BTW: I use Talonite knife and regardless of the Chromium content it keeps cutting.....
smile.gif


David

------------------
DIVERTI NESCIO

---------------
My Photopoint pictures

Mikov Knives
 
David

Great question. Very sophisticated. Apparently you know the chemistry involved so I will address it otherwise.

1. Talonite is chromium and other carbides in a matrix. A big part of the chromium is required for the tough, extremely corrosion resistant matrix that holds the carbide crystals in place.

2. Chromium carbides can be in any of three forms: Cr23C6, Cr7C3, Cr3C2 Talonite may or may not contain just one kind of chromium carbide. This kind of catalytic chemistry and the grain size and overall grain growth technologies are highly proprietary.
 
I know it works and it WONT rust..... thats about all


[ 03-26-2001: Message edited by: tom mayo ]
 
Back
Top