Are there semi-circular stones for the Edge Pro?

[jalapeno]

I happened across some "Lansky curved blade hone" stones in coarse, med, fine, ex fine. They appear from a photo to be roughly 3/4" wide and 5" long, with a semi-circular cross section. Are similar stones available for the edge pro (they'd seem to be useful for concave blades)?


If not directly, could these Lansky (there might be others; not sure) stones be popped off their holders without breaking them, and re-attached to a base that fits the edge pro?

 

[Bdtry]

I happened across some "Lansky curved blade hone" stones in coarse, med, fine, ex fine. They appear from a photo to be roughly 3/4" wide and 5" long, with a semi-circular cross section. Are similar stones available for the edge pro (they'd seem to be useful for concave blades)?


If not directly, could these Lansky (there might be others; not sure) stones be popped off their holders without breaking them, and re-attached to a base that fits the edge pro?

This place has a really fine one. https://www.gritomatic.com/collections/edge-pro-stones/products/ruby-ceramic-curved-stone

 

[cbwx34]

Edgepro has ½" wide stones for recurves. Most can be done with the regular stones though. I did this knife with the regular stones... and it has a pretty deep recurve...

...enough of the stone will contact to do the job. (I work the recurve area in both directions for better coverage).