-
The BladeForums.com 2024 Traditional Knife is ready to order! See this thread for details: https://www.bladeforums.com/threads/bladeforums-2024-traditional-knife.2003187/
Price is$300$250 ea (shipped within CONUS). If you live outside the US, I will contact you after your order for extra shipping charges.
Order here: https://www.bladeforums.com/help/2024-traditional/ - Order as many as you like, we have plenty.
Available Knives
- Thread starter navman
- Start date
- Joined
- Mar 4, 2013
- Messages
- 2,999
Walkabout semi skinner in M398, heat treated to 64-65 HRC by Peters'. Hollow ground on a 24" radius platen with a tapered tang. it wears stabilized dyed box elder burl with green G10 liners, secured with a brass corby bolt, tree of life pin and copper lanyard tube. The blade is 3.5 inches long with an overall length of 7.5 inches.
Rides in hand sewn leather with green stitching to compliment the liners.
$290
Rides in hand sewn leather with green stitching to compliment the liners.
$290
- Joined
- Mar 4, 2013
- Messages
- 2,999
This Boot Skinner has "jeans" scales (blue linen and natural linen micarta) with copper hardware and a stainless/CF Trinity decorative pin. The lanyard tube is surrounded by natural micarta. Ground from 1/8" thick CPM S90V on a 24" radius platen and hand satin finished Heat treat by Peters' to 61.5 HRC. BTE thickness is .008 (geometry cuts)! Tapered tang (.020") with a 3.25" blade, 7.5" OAL. Spine is rounded and has a short section of 30LPI thumb serrations.
Sheath is hand stitched in brown leather with a blue ostrich leg inlay and blue stitching to compliment the knife.
$290
Sheath is hand stitched in brown leather with a blue ostrich leg inlay and blue stitching to compliment the knife.
$290
- Joined
- Mar 4, 2013
- Messages
- 2,999
Nordic EDC "Thors Tooth" featuring a tapered partial tang of premium M398. Blade is 3 inches, hollow ground on a 24" radius platen and heat treated to 64 HRC by Peters'. The Blade is secured by 3 copper pins and system 3 epoxy (pins were peened for added strength.) The handle is denim micarta from AKS with a natural canvas micarta core, copper corby bolt and tube. I added some serrations to the top of the handle for indexing. OAL is 7.5 inches. The sheath is a pocket clip leather sheath with some light carving, excellent retention, but releases the blade easily.
$280
$280
- Joined
- Mar 4, 2013
- Messages
- 2,999
Two Drop point hunters, in hollow ground M398 (65 HRC) with 3.5 inch hand satin finished blades ground on a 24 inch radius. Both feature tapered tangs and are 7.5 inches OAL. One is handled in double dyed and stabilized box elder burl with green G10 liners and brass hardware. The other features some premium Tazmanian Blackwood (close relative to Koa) with red G10 liners and stainless steel hardware.
They ride in hand stitched leather sheaths with stitching that compliments the liners.
$290 each
They ride in hand stitched leather sheaths with stitching that compliments the liners.
$290 each