BACKWOODS "DIY" BATCH In 1095

[bacustomknives]

I HAVE A BUNCH OF BLADES FINNISHED UP AND THERE LAYING EVERYWERE SO I DECIDED ILL PART WITH A FEW OF THEM TO GIVE YOU DO IT YOURSELFER'S A STAB AT IT,ALL THESE BLADES ARE FULLY GROUND,FULLY HARDENED FROM TIP TO REAR,AND TEMPERED,READY FOR HANDLES, WITH A CUTTING EDGE PUT ON THEM THERE NOT RAZOR SHARP AS YOU CAN STROP THEM OR SHARPEN THEM HOW YOU WANT,THEY WILL CUT YOU AS IS. TAPE THE CUTTING EDGES UP BEFORE STARTING YOUR PROJECT PLEASE,THEY ALL ARE ALDO'S 1095 CARBON,THEY HAVE BEEN GROUND TO 600 AND POLISHED OUT WITH A FINE NORTON WHEEL,THEN BUFFED WITH WAX. YOU CAN PUT YOUR OWN FINNISH ON THEM,SATIN,HAND RUBBED ECT,SOME MAY HAVE SMALL SCRATCHES ECT,I RARELY DO THIS BUT NO USE IN THEM LAYING IN THE SHOP,AS IM GONNA TAKE A FISHING TRIP ILL GIVE YOU ALL SOMETHING TO DO WHILE IM GONE,THESE ALL ARE 5/32" 1095 STOCK
FIRST ILL TAKE IT BY TIME STAMP AS THESE ARE LISTED ELSEWERE

PAYPAL PLEASE- BACUSTOMKNIVES@YAHOO.COM

FROM TOP TO BOTTOM

#1 7 7/8" OAL 3 3/8" BLADE - DART/TOP SWEDGE- $55 SOLD TO Init
#2 8 1/4" OAL 3 1/2" BLADE - DROP POINT / TOP SWEDGE - $60 SOLD TO F.L.H
#3 7 7/8" OAL 3 1/2" BLADE - HUNTER /TOP BEVEL -$55SOLD TO W.B
#4 8" OAL 3 1/2" BLADE - HUNTER / TOP BEVEL -$60
#5 8 1/8" OAL 3 3/4" BLADE - LAYED BACK HUNTER /TOP SWEDGE - $60 SOLD TO L.CHURL
#6 8 5/8" OAL 4 1/4" BLADE - NEW TIMER / TOP BEVEL - $65
#7 9 1/4" OAL 4 1/4" BLADE - ZERO GROUND SCANDI BUSH KNIFE - $70 SOLD TO DAVE

 

[Tilley Knife]

I'll take this one. Payment sent and thanks. - WB

#3 7 7/8" OAL 3 1/2" BLADE - HUNTER /TOP BEVEL -$55