- Joined
- Nov 11, 2003
- Messages
- 6,787
Bali-Song Sale!
Vintage Benchmade Model 35
some scratches on blade and handles, pivots are fine (not too loose), latch lock-up is tight, meaning perfect. 3" blade. These little 3"ers make a great addition to your collection, and are nice flippers. $150
PCC Model 10 (Pacific Cutlery)
Nice little vintage 3"er. Don't see these too often. It comes with the original vintage sheath, which is one of the less-common vertical and horizontal carry sheaths PCC used for a while on their earlier stuff. This PC 10 has seen some use. Handles are a little loose, but not too bad. Blade and handles have some scratches, and looks like the tip of the blade may have been sharpened at one point. The latch locks up tight in the open position but is loose in the closed position. The tang pin is smushed, but works correctly (the handles don't touch, which is good). If you're looking for a cheap example of a PC 10, this is it. Pat # is printed on the back side. The sheath is used and worn as well. $95
Brand New in the Box Benchmade 42A T-Latch
440C steel, torx screws, beautiful blue to purple anodizing. Comes with original box and sheath.
The anodizing isn't really showing up in the pictures very well, but it's blue on both ends and grades to purple as it moves toward the center of the handles.
$220
Brand New in the Box Benchmade 43 Springlatch
Springlatch version was harder to find! This one is dead mint just the way it arrived from New Graham years ago. Includes box, sheath, paperwork, and bandaids! $220
Vintage Benchmade Model 35
some scratches on blade and handles, pivots are fine (not too loose), latch lock-up is tight, meaning perfect. 3" blade. These little 3"ers make a great addition to your collection, and are nice flippers. $150
PCC Model 10 (Pacific Cutlery)
Nice little vintage 3"er. Don't see these too often. It comes with the original vintage sheath, which is one of the less-common vertical and horizontal carry sheaths PCC used for a while on their earlier stuff. This PC 10 has seen some use. Handles are a little loose, but not too bad. Blade and handles have some scratches, and looks like the tip of the blade may have been sharpened at one point. The latch locks up tight in the open position but is loose in the closed position. The tang pin is smushed, but works correctly (the handles don't touch, which is good). If you're looking for a cheap example of a PC 10, this is it. Pat # is printed on the back side. The sheath is used and worn as well. $95
Brand New in the Box Benchmade 42A T-Latch
440C steel, torx screws, beautiful blue to purple anodizing. Comes with original box and sheath.
The anodizing isn't really showing up in the pictures very well, but it's blue on both ends and grades to purple as it moves toward the center of the handles.
$220
Brand New in the Box Benchmade 43 Springlatch
Springlatch version was harder to find! This one is dead mint just the way it arrived from New Graham years ago. Includes box, sheath, paperwork, and bandaids! $220
