Battle Saw thickness check

[xxwarderxx]

If you picked up a Battle Saw, and have or can measure the thickness, please post the results along with the finish.

Specs were to be approx .220" but I recall one of the early recipients stating theirs was closer to .250".

My Battle Saw has the Desert Sage coating and is .247" thick

 

[Rob_Mob]

Weight too please!!!

 

[AZTimT]

Same color, same thickness, 25.1 oz with micarta. It is exactly the same thickness as my old cgfbm... so can we get a cgfbs?

 

[Tyrade83]

Mine is stripped, measures .235" (5.95mm), and weighs 1.55 lbs (701g) with black micarta scales

 

[xxwarderxx]

Cool. Thanks guys. It will be interesting to see how much variation there is in the thickness between blades and possibly coatings. I'll update my first post with the weight once I have a scale that can give an accurate reading.

 

[KWR]

black = 0.240"
desert sage = 0.243"

Will try & get weight measurements.

 

[Blade Runner 7]

I have 2 Battle Saws. Both black coating with black canvas.

First one
1 lb 9.6 oz
.245" thick

Second one
1 lb 9 oz
.250" thick
I measured each like 10 times. Weird that ever so slightly thicker one is ever so slightly lighter.

 

[AZTimT]

^Probably cbt milling differences on the weight.

 

[SpyderPhreak]

I posted this in the Battle Saw thread:

...

My Battle Saw measurements are:

11 1/8" blade (tip to handle scales)
16 1/2" OAL
0.243" thick INFI
2 3/32" blade height (saw tooth tip to edge, that's a tiny bit more than my NMFBM!!! )
734.2g (25.89 oz)

This one WILL go down in Busse history as one of the coolest, best Busse knives EVER made!!! :thumbup:

Mine is Tanker Grey with Blue/Black G10. :thumbup: FWIW, my CBT doesn't seem to be nearly as deep as some FBM's I've seen.