bk2 teklok

[theaxel]

Hi guys i've been thinking about what my next knife purchase should be and i think ive narrowed it down to a Becker. I would just like to know if the sheath for the bk2 is compatible with a large teklok.
This will be my first becker knife and id just like to see what you guys reackon about it as a weekend sort of edc. And would a bk10,bk16 be a better option, im using it to cut up wood and rope.

And finally one last question, how is the steel, does it rust easily and how is it in comparison to cod steel sk-5?

Sorry about any spelling mistakes this is sent from a phone.

 

[woody_allen]

My advice will be BK2 ,as always Build like a tenk,nearly undestractable. You can sharpen it razor sharp,and blade will hold the edge long time.
As for tek-lock,no problem at all,I got large tek-lock on my BK2 sheath ,you just need to remove that nylon strap.

 

[SideTracked]

Teklok compatible, yes. Weekend edc? Might be a little big but I suppose that is only an issue depending your surroundings. The 10 has a similar blade size but a slimmer bar stock, making it a little better slicer. The 16 is overall more compact and easier to carry.

All of them will process wood just fine, the 2 being the leader of the 3 choices (that 1/4 inch bar stock is unstoppable) but the 10 or 16 might hold the edge (pun intended) when it comes to slicing rope.

I'm not familiar with any cold steel products to compare steels but know 1095. It will rust if not cared for. The blades come coated to help with the issue. Yes you can get them wet but I would be sure to dry it before putting it back in the sheath or leaving it unattended for a few hours. It is not the end of the world if rust does form, a little sanding will solve that problem. I hope I helped, good luck!

 

[theaxel]

Thanks guys im looking forward to when i order it

 

[Tdhurl1103]

You won't be disappointed...at all. I love my 2.....well, I think we all love our 2's.

 

[iwouldhurtafly]

The SK5 steel from CS really cannot hold candle to KA-BAR's 1095CV in edge retention. SK5 can get sharp really fast, but it will not hold it as long as 1095cv. SK5 also is easier to put a sharper edge on, but again it will not hold it as well.

SK5 is more for strength than edge retention, since it is essentially a type of spring steel. With the right HT SK5 can do very well...

1095CV is one of the best production carbon steels on the market because A. its cheap, B. it performs well, C. good edge retention, D. Good overall strength and durability.

I have both the CS Recon Scout and the BK2... if I had to rely on just one I am grabbing the BK2... This is all due to my perception of dependability and my steel preference/performance.

If you have the choice between a BK2 and a BK10... Basically the BK10 is going to be slicier overall, the BK2 is going to be stronger... Both blades will serve you very very very well...

I guess I will have to snap some pics of both.... we will see.

 

[iwouldhurtafly]

Snapped a few quick pics for threads sake...








It has been raining for a couple days now and I am loving it... anyways, not really a steel comparison but I got the BK2 to compete with the CS RS... basically one is more of a fighting knife, one is more of a bush knife.

 

[theaxel]

Wow thanks for those pics and the info on the steels, im prwtty sure youguys have helped me make up my mine.


I guess im geyting a Becker

 

[iwouldhurtafly]

Probably the best choice... the only difference nowadays is that the Recon scout and the trailmaster are being made of 01 tool steel... probably a better choice than SK5, but I do not think it would be better than good ol 1095cv. Could only say if I had a Cold Steel Bowie in 01, but still, the tang difference is pretty ginormous... The BK2 is going to be a lot stronger overall either way.

 

[arizonaranchman]

The Large TekLok is by far the best alteration I've done for my BK2. I love the stock kydex sheath, but hate that floppy nylon belt loop that hangs the knife too low. I like my knife high and close/snug on my hip, not flopping around on the side of my leg (no I don't like tie-downs).

The BK2? Well what can be said that hasn't already been said? It's a super-duty companion that will last you a lifetime. Rust is of no concern unless you just let it lay around in damp conditions or are around salt-water a lot. Use it regularly and rust will never even get a start. If it needs to be stored then wipe it down with oil prior. The BK2 is truly a wonderful working blade.