RokJok
Gold Member
- Joined
- Oct 6, 2000
- Messages
- 4,213
NOTE: Non-thumbnail pic links are 1024 x 768 pixels (SVGA size). FIrst "I'll take it" to my hotmail addy wins -- be sure to include knife make/model in subject line. Payment via US Post Office domestic money order only. Buyer must be at least 18 years old and abide by all applicable laws re: buying and possessing a knife.
Blackjack Reinhardt Kukri and Marauder MK-1 kukris with leather sheaths.
$250 for both of them, $120 for MK-1 and $150 for Reinhardt singly, shipping to USA address included in price.
-- I don't think the Blackjack Reinhardt has ever been used. The markings are pristine. There is a light scratch approx 1/2" long on the right side of the blade that I suspect is from the sheath. Sheath shows scufffing from storage. Stitching is intact and tight on the sheath. Leg tie and leather thong included.
Specs:
Blade Length: 10-3/16" tip-to-handle
Blade Thickness: 3/16" (looks to be 1/64" over 3/16")
Sheath: black leather
Overall Length: 15-5/8"
Blade Steel: AUS-8
Rc: 56-57
-- I've used the MK-1 a few times. Overall in good shape. A chopper that offers extremely good penetration when chopping laurel branches IME. It has what appears to be water spotting on steel (not rust!). The handle on the MK-1 is one of the most comfortable I've experienced -- sort of like the Busse Basics handle shape. There is a very small edge roll near tip (approx 1/16" long and very shallow - should disappear with a few sharpenings). Sheath shows some scuffing & scratches. Double-row stitching on sheath is intact and tight.
Dial-up thumbnail picture: http://i104.photobucket.com/albums/m186/RokJok/knives/th_Blackjack_kukris_3612.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3611.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3612.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3613.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3614.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3615.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3616.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3617.jpg
** SPF ** Cold Steel SRK, Carbon V steel, kraton handle, ambidextrous moulded sheath (kydex?) with nylon webbing belt loop and horizontal/vertical carry lashing point on the rear of the sheath. Knife is slightly used. It has some minor scuffing on blade coating, just some grooves that do not go all the way through.
$55 shipped CONUS.
Dial-up thumbnail picture: http://i104.photobucket.com/albums/m186/RokJok/knives/th_CS_SRK_CarbonV_3627.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3627.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3628.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3629.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3630.jpg
** SPF ** Spyderco Moran Featherweight FB-01, swept-point skinner, VG-10 stainless steel, FRN handle with kraton inserts, kydex sheath. New, never used.
$65 shipped CONUS.
Dial-up thumbnail picture: http://i104.photobucket.com/albums/m186/RokJok/knives/th_Spyderco_Moran_FB01_3643.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Spyderco_Moran_FB01_3643.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Spyderco_Moran_FB01_3644.jpg
Blackjack Reinhardt Kukri and Marauder MK-1 kukris with leather sheaths.
$250 for both of them, $120 for MK-1 and $150 for Reinhardt singly, shipping to USA address included in price.
-- I don't think the Blackjack Reinhardt has ever been used. The markings are pristine. There is a light scratch approx 1/2" long on the right side of the blade that I suspect is from the sheath. Sheath shows scufffing from storage. Stitching is intact and tight on the sheath. Leg tie and leather thong included.
Specs:
Blade Length: 10-3/16" tip-to-handle
Blade Thickness: 3/16" (looks to be 1/64" over 3/16")
Sheath: black leather
Overall Length: 15-5/8"
Blade Steel: AUS-8
Rc: 56-57
-- I've used the MK-1 a few times. Overall in good shape. A chopper that offers extremely good penetration when chopping laurel branches IME. It has what appears to be water spotting on steel (not rust!). The handle on the MK-1 is one of the most comfortable I've experienced -- sort of like the Busse Basics handle shape. There is a very small edge roll near tip (approx 1/16" long and very shallow - should disappear with a few sharpenings). Sheath shows some scuffing & scratches. Double-row stitching on sheath is intact and tight.
Dial-up thumbnail picture: http://i104.photobucket.com/albums/m186/RokJok/knives/th_Blackjack_kukris_3612.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3611.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3612.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3613.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3614.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3615.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3616.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Blackjack_kukris_3617.jpg
** SPF ** Cold Steel SRK, Carbon V steel, kraton handle, ambidextrous moulded sheath (kydex?) with nylon webbing belt loop and horizontal/vertical carry lashing point on the rear of the sheath. Knife is slightly used. It has some minor scuffing on blade coating, just some grooves that do not go all the way through.
$55 shipped CONUS.
Dial-up thumbnail picture: http://i104.photobucket.com/albums/m186/RokJok/knives/th_CS_SRK_CarbonV_3627.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3627.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3628.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3629.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/CS_SRK_CarbonV_3630.jpg
** SPF ** Spyderco Moran Featherweight FB-01, swept-point skinner, VG-10 stainless steel, FRN handle with kraton inserts, kydex sheath. New, never used.
$65 shipped CONUS.
Dial-up thumbnail picture: http://i104.photobucket.com/albums/m186/RokJok/knives/th_Spyderco_Moran_FB01_3643.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Spyderco_Moran_FB01_3643.jpg
http://i104.photobucket.com/albums/m186/RokJok/knives/Spyderco_Moran_FB01_3644.jpg
Last edited:
