lostzebrastripes
Therefore, you will... NARFLE THE GARTHOK!
- Joined
- May 31, 2010
- Messages
- 647
Up for sale today are three knives, and a Knuckle Duster of sorts.
Up first is a Single Finger Knuck (SFK) made by Afrankart on JerzeeDevil.
It's half an inch thick copper, with roughly a one inch diameter hole for your finger.
Only damage on it is a very light patina caused by finger prints.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is SOLD $45 SOLD shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Next is a Spyderco Centofante 3, with box.
Only damage I see is a very light smudge-like patina on the hollow ground part of the blade.
Knife appears to have factory edge, blade is slightly off centered, and the black pocket clip shows no wear.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is WITHDRAWN $40 WITHDRAWN shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Next is a Taylor Seto Manila Folder balisong knife.
This knife has been flipped, and has the twirl marks at the pivots and scuffs on the blade to prove it.
Damage I see on this knife besides the flip marks is that there are spots of black patina inside the brass handles.
Swedge is unsharpened.
Pivot pins are lightly showing on one side of each handle, but handles are as tight as they can be on a channelled construction bali.
Locks up tight in open and closed position.
Weight is 6.9 ounces.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is SOLD $60 SOLD shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Next is a Benchmade 41 SS Limited Edition in D2.
This knife has been flipped and has twirls at the pivots and scuffs on the blade from making contact with the handles.
One thing to note is that this knife has a defect.
The defect is that one of the pivot holes in the handle isn't centered, and the female pivot screw isn't pressed in all the way.
This defect has only affected the lock up.
Though this knife locks up in both open and closed positons, it takes only a little amount of pressure to pop the spring latch when in the closed position.
When in the open position, to pop the spring latch it takes slightly more pressure.
Other then that the only thing to note is that there is no Loc-Tite on the pivot screws.
Weight is 7 ounces.
Comes with Benchmade sheath.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is SOLD $250 SOLD shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Up first is a Single Finger Knuck (SFK) made by Afrankart on JerzeeDevil.
It's half an inch thick copper, with roughly a one inch diameter hole for your finger.
Only damage on it is a very light patina caused by finger prints.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is SOLD $45 SOLD shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Next is a Spyderco Centofante 3, with box.
Only damage I see is a very light smudge-like patina on the hollow ground part of the blade.
Knife appears to have factory edge, blade is slightly off centered, and the black pocket clip shows no wear.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is WITHDRAWN $40 WITHDRAWN shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Next is a Taylor Seto Manila Folder balisong knife.
This knife has been flipped, and has the twirl marks at the pivots and scuffs on the blade to prove it.
Damage I see on this knife besides the flip marks is that there are spots of black patina inside the brass handles.
Swedge is unsharpened.
Pivot pins are lightly showing on one side of each handle, but handles are as tight as they can be on a channelled construction bali.
Locks up tight in open and closed position.
Weight is 6.9 ounces.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is SOLD $60 SOLD shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Next is a Benchmade 41 SS Limited Edition in D2.
This knife has been flipped and has twirls at the pivots and scuffs on the blade from making contact with the handles.
One thing to note is that this knife has a defect.
The defect is that one of the pivot holes in the handle isn't centered, and the female pivot screw isn't pressed in all the way.
This defect has only affected the lock up.
Though this knife locks up in both open and closed positons, it takes only a little amount of pressure to pop the spring latch when in the closed position.
When in the open position, to pop the spring latch it takes slightly more pressure.
Other then that the only thing to note is that there is no Loc-Tite on the pivot screws.
Weight is 7 ounces.
Comes with Benchmade sheath.
First "I'll take it." followed by a PM or E-mail has first crack at it.
Price is SOLD $250 SOLD shipped w/ insurance and delivery conf.
Pay Pal preferred as payment.
Price includes PP and S&H.
USA ONLY
Last edited:
