- Joined
- Apr 12, 2006
- Messages
- 3,079
I have a couple of these listed in another thread, but instead of adding to the long sold list, I started a new thread. PayPal prefered. CONUS only please (looking for a quick sale here so I can buy some new knives). All knives are plain edge and I don't have a digital camera to take pics with, I will see if I can borrow one but it might take awhile. Because of the lack of pics, if you recieve the knife and feel that I didn't describe it accuratley, I will refund your money or make it right somehow. Please let me know if any of my prices are crazy.
1. Benchmade Pika (origanal model with 440c blade), very good con. has been sharpened and has some light scratches on the blade from being used a couple of times. Also has some light scuffs around the edges of the clip from carry.-$20*SOLD*
2. Benchmade Mini-Pika (origanal) same con as above except the scratches, the clip wear is little more present on this one.-$18*SOLD*
3. Benchmade Mini-Ambush mint con.-SOLD
4. Spyderco Delica 4, the clip threads on the right side of the handle are stripped, clip screws won't tighten on this side, left side works fine (I bought it that way, needs to be sent to Spyderco for warranty. I have two clips for this one, one I just bought from Spyderco and it is black, the other came with the knife and is kind of a stonewash finish. Has been sharpened and other than the clip issue is in excellant con.-$30-$27*TRADED*
5. Buck Mayo Northshore, like new con. has been touched up once and it has three very small marks at the top of the handle from one day of carry.-$35-$30
6. Kershaw Chive, like new has been sharpeed once-SOLD
7. HAK Hide Away Knife straight edge S30V (oxidised finish) cordwrapped model (not sure of the size, but I could measure it is interested) has kydex neck sheath. Very good con. has been sharpened with a convex edge.-SOLD
8. Kershaw Boa (factory secondxxx) S30V, very good con. I don't know why is is marked a second except that is had a small dimple in the handle near the pivot (very hard to see unless you know its there. I just gave it a tune up with new torsion bar, lock button, washers, clip, and handle screws. It really only needed a new clip (old one had some scratches) and the torsion bar was a little weak, but I figured a little preventative maintinance/makeover wouldn't hurt.-$65-$60*TRADED*
9. Wood Jewel Big Carving Knife (actually not that big) curly birchwood and reindeer handle, very good con. has some small rust spots on the blade and some use marks.-withdrawn for now
10. Gerber AR 3.00 black blade mint-$12*TRADED*
11. Boker Gaucho Sodbuster Jr. mint-$15-$13
12. Cold Steel Urban Pal (serrated) has been used a little with scratches near the tip and it has been sharpened a couple of times.-$13-$12
13. Benchmade Mini-Grip 555 (440C), very good condition has been sharpened and used very lightly, has two small blemishes on the handle that don't stand out from carry.-$50-$45*TRADED*
14. Kershaw Leek satin finish, Like new, I thinned the edge out a little and it is a great slicer.-SOLD
15. Spyderco Blue Salsa, very good con. has three small nicks in the handle from one day or carry, also has a vey small rough spot on the spine of the blade wich is hard to see and could be smoothed out with a stone.-$35-$33-$30
If you have any questions about anything, send me an e-mail. I would also consider trading for traditional slipjoints (I prefer peanuts, stockmans, muskrats, trappers, pen and jack, bone handles. But would be open to anything) and fixed blades (especially Moras and Puukos)
1. Benchmade Pika (origanal model with 440c blade), very good con. has been sharpened and has some light scratches on the blade from being used a couple of times. Also has some light scuffs around the edges of the clip from carry.-$20*SOLD*
2. Benchmade Mini-Pika (origanal) same con as above except the scratches, the clip wear is little more present on this one.-$18*SOLD*
3. Benchmade Mini-Ambush mint con.-SOLD
4. Spyderco Delica 4, the clip threads on the right side of the handle are stripped, clip screws won't tighten on this side, left side works fine (I bought it that way, needs to be sent to Spyderco for warranty. I have two clips for this one, one I just bought from Spyderco and it is black, the other came with the knife and is kind of a stonewash finish. Has been sharpened and other than the clip issue is in excellant con.-$30-$27*TRADED*
5. Buck Mayo Northshore, like new con. has been touched up once and it has three very small marks at the top of the handle from one day of carry.-$35-$30
6. Kershaw Chive, like new has been sharpeed once-SOLD
7. HAK Hide Away Knife straight edge S30V (oxidised finish) cordwrapped model (not sure of the size, but I could measure it is interested) has kydex neck sheath. Very good con. has been sharpened with a convex edge.-SOLD
8. Kershaw Boa (factory secondxxx) S30V, very good con. I don't know why is is marked a second except that is had a small dimple in the handle near the pivot (very hard to see unless you know its there. I just gave it a tune up with new torsion bar, lock button, washers, clip, and handle screws. It really only needed a new clip (old one had some scratches) and the torsion bar was a little weak, but I figured a little preventative maintinance/makeover wouldn't hurt.-$65-$60*TRADED*
9. Wood Jewel Big Carving Knife (actually not that big) curly birchwood and reindeer handle, very good con. has some small rust spots on the blade and some use marks.-withdrawn for now
10. Gerber AR 3.00 black blade mint-$12*TRADED*
11. Boker Gaucho Sodbuster Jr. mint-$15-$13
12. Cold Steel Urban Pal (serrated) has been used a little with scratches near the tip and it has been sharpened a couple of times.-$13-$12
13. Benchmade Mini-Grip 555 (440C), very good condition has been sharpened and used very lightly, has two small blemishes on the handle that don't stand out from carry.-$50-$45*TRADED*
14. Kershaw Leek satin finish, Like new, I thinned the edge out a little and it is a great slicer.-SOLD
15. Spyderco Blue Salsa, very good con. has three small nicks in the handle from one day or carry, also has a vey small rough spot on the spine of the blade wich is hard to see and could be smoothed out with a stone.-$35-$33-$30
If you have any questions about anything, send me an e-mail. I would also consider trading for traditional slipjoints (I prefer peanuts, stockmans, muskrats, trappers, pen and jack, bone handles. But would be open to anything) and fixed blades (especially Moras and Puukos)
