All prices include delivery confirmation + shipping to the lower 48 states.
International sales are possible but will require working out further details.
US Money orders or cash only, no paypal.
First "I'll" take it posted in this thread gets it.
75$ #1. BM 420 CE. Has seen light use, still in superb condition, just has a couple very minor cosmetic flaws and has been sharpened once on the PE portion using fine ceramic rods.
**TRADED**80$ #2. BM 425 PE. Coated wharncliffe version. Incredibly smooth action, perfect lock-up with room for wear. Has been sharpened a bit by previous owner. Coating is still in near flawless condition.
**TRADED**40$ #3. Kershaw Mini Cyclone PE. Like new with box. Opened and closed it some and cut one or two things with it, that's all. Please note this is the regular version in 13C27, not the Ti/ZDP version.
**TRADED**30$ #4. Spyderco Endura SE. Fully serrated, stainless handles, excellent condition. Only cut one or two things with it and switched the clip to tip up. I'm not sure if it's version 2 or 3, but it's one of the older models.
**SOLD**15$ #5. Spyderco Endura 3 PE. Used. Was SE, re-ground to PE. Thinner than a stock Endura grind. Also added a choil in the FRN handle. Clip is more gray than black. Lock-up and action still tight.
12$ #6. Kershaw Storm PE. Black coated small version. Reprofiled heavily. Was used as a "beater" but didn't get pulled out as much as the Endura 3, so it's still in excellent shape aside from a scratch or two on the handle and my ugly reprofiling job.
**SOLD**10$ #7. Opinel #8. Great condition, previous owner sharpened it.
10$ #8. Victorinox Spartan. New no box. Superficial scratches on the scales from being in my knife drawer.
8$ #9. Victorinox Bantam. Used, reprofiled blade and modified screwdriver tip. Will sell this + Spartan for 16$.
**WITHDRAWN**#10. Victorinox Trekker. Like new no box. Used the screwdriver once and whittled some shavings with the blade. Looks new. Note this is the two handed PE version.
15$ #11. Brusletto Balder. See it at www.ragweedforge.com Like new condition. It came to me with a bad burr but well formed edge, so I used a ceramic rod with very light passes at a raised angle to remove the burr, then stropped it to a hair popping sharp edge. Looking at the blade you wouldn't know I sharpened it at all if I didn't tell you.
**SOLD**100$ #12. Spyderco Yojimbo. Blue handles, PE, has box. Excellent condition. I received it new, carried it a handful of times and cut a few things with it. Still 99%.
If you need additional photos of any of these knives just let me know.
Will consider trades for BM's, Emersons, Spydercos and Kershaws. Will also consider Mora's for the less expensive knives.
Raumien@gmail.com
Here are additional photos of the Yojimbo and two Benchmades
http://i21.tinypic.com/ncmglk.jpg
http://i23.tinypic.com/14m82ds.jpg
http://i20.tinypic.com/2dsi7if.jpg
http://i22.tinypic.com/2hib13a.jpg
http://i20.tinypic.com/avht9s.jpg
http://i22.tinypic.com/1zb81ew.jpg
International sales are possible but will require working out further details.
US Money orders or cash only, no paypal.
First "I'll" take it posted in this thread gets it.
75$ #1. BM 420 CE. Has seen light use, still in superb condition, just has a couple very minor cosmetic flaws and has been sharpened once on the PE portion using fine ceramic rods.
**TRADED**80$ #2. BM 425 PE. Coated wharncliffe version. Incredibly smooth action, perfect lock-up with room for wear. Has been sharpened a bit by previous owner. Coating is still in near flawless condition.
**TRADED**40$ #3. Kershaw Mini Cyclone PE. Like new with box. Opened and closed it some and cut one or two things with it, that's all. Please note this is the regular version in 13C27, not the Ti/ZDP version.
**TRADED**30$ #4. Spyderco Endura SE. Fully serrated, stainless handles, excellent condition. Only cut one or two things with it and switched the clip to tip up. I'm not sure if it's version 2 or 3, but it's one of the older models.
**SOLD**15$ #5. Spyderco Endura 3 PE. Used. Was SE, re-ground to PE. Thinner than a stock Endura grind. Also added a choil in the FRN handle. Clip is more gray than black. Lock-up and action still tight.
12$ #6. Kershaw Storm PE. Black coated small version. Reprofiled heavily. Was used as a "beater" but didn't get pulled out as much as the Endura 3, so it's still in excellent shape aside from a scratch or two on the handle and my ugly reprofiling job.
**SOLD**10$ #7. Opinel #8. Great condition, previous owner sharpened it.
10$ #8. Victorinox Spartan. New no box. Superficial scratches on the scales from being in my knife drawer.
8$ #9. Victorinox Bantam. Used, reprofiled blade and modified screwdriver tip. Will sell this + Spartan for 16$.
**WITHDRAWN**#10. Victorinox Trekker. Like new no box. Used the screwdriver once and whittled some shavings with the blade. Looks new. Note this is the two handed PE version.
15$ #11. Brusletto Balder. See it at www.ragweedforge.com Like new condition. It came to me with a bad burr but well formed edge, so I used a ceramic rod with very light passes at a raised angle to remove the burr, then stropped it to a hair popping sharp edge. Looking at the blade you wouldn't know I sharpened it at all if I didn't tell you.
**SOLD**100$ #12. Spyderco Yojimbo. Blue handles, PE, has box. Excellent condition. I received it new, carried it a handful of times and cut a few things with it. Still 99%.
If you need additional photos of any of these knives just let me know.
Will consider trades for BM's, Emersons, Spydercos and Kershaws. Will also consider Mora's for the less expensive knives.
Raumien@gmail.com
Here are additional photos of the Yojimbo and two Benchmades
http://i21.tinypic.com/ncmglk.jpg
http://i23.tinypic.com/14m82ds.jpg
http://i20.tinypic.com/2dsi7if.jpg
http://i22.tinypic.com/2hib13a.jpg
http://i20.tinypic.com/avht9s.jpg
http://i22.tinypic.com/1zb81ew.jpg
