Branding/Engrving your logo???

R

rueffwt

Joined
Feb 20, 2006
Messages
12
Hi All,

I started making knives about a year ago just using a little craftsman belt/disc sander. I got a Bader B III in november and can't believe the difference it makes!! I've got several questions that maybe someone can help me with. I have gotten much more serious with my knife making, and would really like to add my signature/logo to the blade. How do i do that? What's the best method? On one of my knives i made with the Craftsman sander i used a dremel tool to just freehand an "R" on the base of the blade, but I need to find a better method that will produce a consistent and professional look. Can anybody help me?
 
look up etch-o-matic, if you search this site there are links on how to build your own.It is easy and inexpensive.
 
http://www.etch-o-matic.com/

They have both the etching machines and the equipment for making the stencils yourself. You can make this stuff yourself if you are so inclined, but they are pretty cheap to buy as well.

Rob!
 
When you get set up for etching and you go to have stencils made, may I suggest that you have your initials and last name, and in smaller font below, city and state, so it all comes out even lengthwise with your name above.

Too many times I've seen people searching for the maker of a knife that just has some single initial or other type of logo. They are rarely identified.

If you're proud of your work, make sure everyone knows where it came from and who made it.

You don't have to go real big on those either, where they overpower the blade.:eek:;)
 
Thanks Alot guys! I really appreciate all of your suggestions, and in such a short time. This bladeforum thing really works huh?! :)
 
Im interested in what you guys think and do personally. If you were gonna go all out and just get the absolute best device/way to mark your knives what would you choose? Also, if had to say, what is the best value, that also produces the best result for marking knives? Thanks again for suggestions so far. i hope i can gain even more insight.

Rueff

p.s. Mike, thanks alot for the suggestion of what info to include in the stencil, it's basic stuff like that, that really helps us newbies.
 
I used the electrical chemical etch and a stencil for years and finally bought a stamp for my blades and one for my sheaths a couple of months ago. I prefer the stamped method myself, but it is just that, personal preference. It is more expensive to have stamps made than to etch.
God Bless!
Jim
 
Can you please explain the difference in "look and feel" for stamps vs. etching?
As for stamping on mass produced knives I noticed that sometimes one side of the stamp is too deep and other can hardly seen.
Is it common problem for stamping?
 
Me personaly I like the etch better. I've got a marking methoud's personalizer and it may take a little longer than a stamp, but I can mark when the knife if 99% finished, not before heat treat. Also I etch my mark just as deep as a stamp. I like it better for the controll I have.
 
rueffwt said:
.......................................

Rueff

p.s. Mike, thanks alot for the suggestion of what info to include in the stencil, it's basic stuff like that, that really helps us newbies.
Click to expand...


Y/W, glad it helped.:)
 
alexmin, yes that is a common problem with the stamp. If it is not perpindicular with the surface, which happens easily holding the stamp by hand and striking with a hammer, it will result in an uneven stamp. I have a 12 ton hydraulic press that I stamp in. It took some work to get the press to go straight up and down good enough to suit me though. By the way, I have not got rid of my etching equipment, I will still use it on some things.
Jim
 
Any body use the etch o matic to mark tools? Is this an easy inexpensive way to mark your tool, to prevent theft? will etch wear off easily?
 
joncevans said:
Any body use the etch o matic to mark tools? Is this an easy inexpensive way to mark your tool, to prevent theft? will etch wear off easily?
Click to expand...

Like Will said above, you can etch as deep as you can stamp. With a good etcher, maybe deeper if you wish.
You can have the etch filled with black oxide during the operation or you can leave it clear, depending on blade color.
 
I use a 12 Ton hydraulic press as well when I stamp. I do this before I heat treat or grind the knife. All my stamps come out great. And by the way I can hand remove the etch from a blade with 400 grit. You will not do that with the stamp. God bless and have a great day.

Barkes :thumbup:
http://my.hsonline.net/wizard/knifeshop.htm
1.812.526.6390
 
I have 3 stamps that I use. One is Large it was about $138.40 The other is a mediam size that was about the same. The last one is a small size that was about $ 90.00. All 3 stamps will last over 20 years or more. And I can write it off on taxes for the shop. You do not need 3 stamps if you are doing one size of knives. I hope this will help you. If you need more you can call me.

http://www.henryaevers.com/

Barkes :thumbup:
http://my.hsonline.net/wizard/knifeshop.htm
1.812.526.6390
 
You must log in or register to reply here.
Back
Top