Broken Arrow Tactical - Customizing and Tuning services

[Broken Arrow]

I just wanted to give everyone here a heads up on my new venture. I still need some minor things ironed out before I officially start.

I will be offering a variety of services on several polymer framed guns (Glock, Kahr, Smith and Wesson M&P, Springfield Armory XDs, and HK USP)

Example of some services:

* Tuning for total reliability (feed ramps, chamber, and breach face polished)
* Fitting match barrels
* Sight installs
* Glock grip reductions and grip shortening (example: Glock 17 with grip cut down to take Glock 19 mags - less printing under clothing)

* Stippling on frames (back, sides, or 360 degrees)
* Removing finger grooves
* Rounding trigger guards (on select models)
* Trigger jobs on select pistols


Also, in the near future, I will be doing work on long guns: Remington 700, Remington 870, M14s, and ARs.

Thanks in advance!

If you have questions please PM or email me : Sorry, this was deemed an ad by the Super Mods. Ads are not permitted by non-paying member

Examples of some of my work.

Here are some pictures of my customized Beretta 92F.
Work done: my reliability package, tuned trigger (smooth 10 lb. DA and 4 lb. SA trigger pull), Wolff springs, and thinned / recontoured grip panels with my stippling. The custom grips that I made (thinned and reshaped) makes the fat grip Beretta feel more lively in the hand. Also, when your hands are wet, the gun will not be slippery in you hand.

Before

After

I just finished customizing my new Glock 20. I didn't know if Glock was going to make a 20SF, so I built one.

Brand new Glock 20 (picked up on Feb. 14, 08) - BEFORE

AFTER - Polished all internal parts, hand fitted a Bar-Sto G20 10mm Barrel, Tru-Glo T.F.O. sights, Ny-1 Trigger, Ghost 3.5 connector, ISMI 22 lb. recoil spring, ISMI Stainless steel guide rod, Grip reduction and stippling (done by me ) That's it for now.

Here is my Glock 27 - grip reduction and stippling.

My third customized Glock, G23. Same as the G27, grip reduction and stippling.

 

[Broken Arrow]

Here is my Glock 34 with a partial grip reduction and my stippling job.

My customized Glock 20 with my grip reduction and stippling.

My customized Glock 21 SF with stippling on the sides.

For the Airsoft fans - my Glock 18

 

[kamagong]

Good luck on the new venture BA.

 

[Steely_Gunz]

Looks great, BA. However, I'm not really sure if this is exactly kosher in the forums. It's not really selling a service, but it sort of is. You're not a paying member. I'm asking the higher ups what the ruling should be. I'll let y'all know once I get an answer.

Regardless, great looking mods you have there.

 

[tedwca]

Nice work, you do a beautiful job.

I'm also a little concerned about it being viewed as SPAM. Perhaps removing the contact information will move it from the SPAM category to just letting a bunch of your friends know about your new endeavor.

Good luck with the new business!!

 

[wildmanh]

BA, 3 things;

#1. You didn't mention so, Do you have an FFL?
#2. Probably should get a Gold or Platium Membership to post stuff like this to be on the safe side. And
#3 Good luck on your venture. Hope you can make it work.

It's nice to see some tuning on the Beretta's. The stock grips work for me but some friends I shoot with dislike the fat grips. They would rather shoot my 1911 then the 9mm Berettas. Good luck!

Heber

 

[Steely_Gunz]

OK, got some feedback from Cougar on this thread. It has been deemed an ad by a non-paying member. Until I hear from a higher up, I have edited out the contact information and I'm going to lock this thread.

BA, once again, great looking stuff:thumbup: However, you gotta upgrade to a paying member to post it up on BFC.

 

[tedwca]

Here's a couple things you can do.

1. Buy a Gold or Platinum membership and you can post to the For Sale: Gadgets & Gear forum and add a link to your website in your signature.
2. If you go Platinum you can add a custom user title announcing you're a master gunsmith, etc.

Regardless, I wish you the best of luck