Last Visible Canary
actively parsing hurf durf
- Joined
- Nov 28, 2006
- Messages
- 4,577
Busse Combat AK47 w/sheath - 600$ SOLD PF
Busse Combat Basic 9 w/factory kydex - 325 300$ TRADED/SOLD PF
khukuri house Jung Bahadur - 60 50$TRADED/SOLD PF
Himalayan Imports 9/16" patang - 150 130$ SOLD PF
Himalayan Imports - D Gaurd fighter - 180 150 135$
Himalayan Imports 20" sirupate - 80 75$
himalayan Imports - 25" sirupate - 110 100$
Himalayan Imports bilton - 25 20$ SOLD PF
leatherman juice pro+ sheath (same tools as the xe6)- 30$
CRKT M1 folder - 35$
All items are shipped via usps priority mail. If you would like insurance on any of the items, add 4$ to the price. I accept paypal (sethmurdoc (at) hotmail.com) and money order. I won't be able to ship this until monday, but I should be able to respond saturday morning, and night, and then sunday morning and night. (I'll be traveling in between).
You can email me at SethMurdoc (at) hotmail.com, or SethMurdoc (at) comcast.net. Thanks for looking
Busse Combat AK47 w/sheath - This is a user. Dont want to sell it, but continued unemployment requires it. It has reletively minor (but visible) smoothed out coating near the center of the blade, and at the tip. there is a small chip in the coating on the corner of the spine in the middle of hte blade, as well as near the ricasso on the spine. the pommel tip has the coating smoothed to steel at the corners. the tip and pommel smoothing is due to having been thrown at a wooden target
That being said, there is no visible edge deformation to speak of, though it is not as sharp as it was when I got it. The sheath is not pretty, but it is fully functional. the tube fasteners are spaced at roughly the correct intervals for a large techlock, but I'm not actually sure if one will fit, or if it would be comfortable to wear in that fashion. It does not come with a belt loop.
Busse Combat Basic 9 w/factory kydex - Basically mint. there is some very slight smoothing along the edges of the spine from the kydex, but otherwise it has never been used for antyhing, and has no visible wear.
Khukuri house Jung Bahadur - This is basically villiger model quality. the sanding job on the surface is very visible, and uneven it its sanding pattern. I removed the paint form the handle because it was latex based and purely decorative. I basically consider this a project show peice, or a rehandle project. I'm pricing at 60 because thats roughly what it cost me to get from khukuri house, and it's no longer in production from them. The handle is pretty much to small to use, though I havent actaully used it yet.
The handle of the jung Bahadur:
5 1/2" of grippable handle length
2 1/2" circumfrance at the index finger
3" circumfrance at center of grip
2" cricumfrance at pinky
http://www.bladeforums.com/forums/attachment.php?attachmentid=67852&stc=1&d=1172089421
This is a picture of the spine of the Bhutan/patang sword next to the spine of the Busse Basic 9
The HI Bhutan sword is a custom order. The blade is 9/16" thick at the ricasso area. much more blade heavy then what you'll find with the standard patangs.
http://www.bladeforums.com/forums/attachment.php?attachmentid=64273&d=1166507435
Busse Combat Basic 9 w/factory kydex - 325 300$ TRADED/SOLD PF
khukuri house Jung Bahadur - 60 50$TRADED/SOLD PF
Himalayan Imports 9/16" patang - 150 130$ SOLD PF
Himalayan Imports - D Gaurd fighter - 180 150 135$
Himalayan Imports 20" sirupate - 80 75$
himalayan Imports - 25" sirupate - 110 100$
Himalayan Imports bilton - 25 20$ SOLD PF
leatherman juice pro+ sheath (same tools as the xe6)- 30$
CRKT M1 folder - 35$
All items are shipped via usps priority mail. If you would like insurance on any of the items, add 4$ to the price. I accept paypal (sethmurdoc (at) hotmail.com) and money order. I won't be able to ship this until monday, but I should be able to respond saturday morning, and night, and then sunday morning and night. (I'll be traveling in between).
You can email me at SethMurdoc (at) hotmail.com, or SethMurdoc (at) comcast.net. Thanks for looking
Busse Combat AK47 w/sheath - This is a user. Dont want to sell it, but continued unemployment requires it. It has reletively minor (but visible) smoothed out coating near the center of the blade, and at the tip. there is a small chip in the coating on the corner of the spine in the middle of hte blade, as well as near the ricasso on the spine. the pommel tip has the coating smoothed to steel at the corners. the tip and pommel smoothing is due to having been thrown at a wooden target
That being said, there is no visible edge deformation to speak of, though it is not as sharp as it was when I got it. The sheath is not pretty, but it is fully functional. the tube fasteners are spaced at roughly the correct intervals for a large techlock, but I'm not actually sure if one will fit, or if it would be comfortable to wear in that fashion. It does not come with a belt loop.
Busse Combat Basic 9 w/factory kydex - Basically mint. there is some very slight smoothing along the edges of the spine from the kydex, but otherwise it has never been used for antyhing, and has no visible wear.
Khukuri house Jung Bahadur - This is basically villiger model quality. the sanding job on the surface is very visible, and uneven it its sanding pattern. I removed the paint form the handle because it was latex based and purely decorative. I basically consider this a project show peice, or a rehandle project. I'm pricing at 60 because thats roughly what it cost me to get from khukuri house, and it's no longer in production from them. The handle is pretty much to small to use, though I havent actaully used it yet.
The handle of the jung Bahadur:
5 1/2" of grippable handle length
2 1/2" circumfrance at the index finger
3" circumfrance at center of grip
2" cricumfrance at pinky
http://www.bladeforums.com/forums/attachment.php?attachmentid=67852&stc=1&d=1172089421
This is a picture of the spine of the Bhutan/patang sword next to the spine of the Busse Basic 9
The HI Bhutan sword is a custom order. The blade is 9/16" thick at the ricasso area. much more blade heavy then what you'll find with the standard patangs.
http://www.bladeforums.com/forums/attachment.php?attachmentid=64273&d=1166507435
:foot: