Busse blade name???

jstn

jstn

Joined
Jun 27, 2012
Messages
3,737
A few months ago (approximately) Busse offered a knife described as a good all-around camp knife with thinner blade stock. I wanted but didn't bite. Now I am trying to remember the name to possibly buy one. Not sure if they have even shipped out yet or not. Thanks for any help!
 
Wanting to say it was the Hog Badger but I don't believe it was going to be a thin blade.
 
Flak Jack Specs:
Blade Length: Approx. 6 1/4"
Over All Length: Approx. 11 3/4"
Thickness: Approx. .170"
Steel: INFI or SR-101
Hardness: 58-60 Rc
Finish: Hand Applied Satin Finish, BIG DC, or Coated
 
Was this it?
HOG Badger Specs:
Blade Length: Approx. 5.9"
Over All Length: Approx. 10.9"
Thickness: Approx. 210"
Steel: INFI or SR-101
Hardness: 58-60 Rc
Bevel Flat Sabre
Handle Material: Optional
Finish: Optional

OsuLhGN.jpg
 
Jerry Busse said:
Introducing The Busse Combat "Flak Jack":cool:

This lightweight blade is perfectly suited for use as a day-camper/hiker and is torqued and ready for heavy abuse on the battlefield. :thumbsup:

The Short Armored Swedge (SAS) reinforces the point while greatly increasing penetration. :thumbsup: :cool: It does all of this without sacrificing the beloved real estate of those who love to baton the spine while prepping for campfires, shelter building, etc. . . :thumbsup::cool:

The all new "Flak Jack" will leave those who are lucky enough to score one absolutely gobsmacked! :eek:o_O

The Flak Jack is destined to make an important addition to any collector's or heavy abuser's war chest. :cool:

There are 5 renditions of this wicked blade available, including a Very Limited INFI Edition from the Busse Custom Shop, a Satin Finished INFI edition, a BIG DC INFI edition, a coated INFI Combat Grade edition and an SR-101 Battle Grade edition which will have the PB discount of $40.00! :cool:

Let's Drink! :thumbsup:

Jerry :D
Click to expand...
 
Jerry Busse said:
PARK RANGER​
Satin Finish
Park%20Ranger%20Satin%203-X3.jpg

Specs:
OAL: Approx. 8.4"
Blade Length: Approx. 4"
Steel: INFI or SR-101
Hardness: 58-60 Rc
Blade Width at Widest point: Approx. 1.3"
Thickness: Approx. .145"

Busse Combat is proud to introduce this thin EDC with a very ergonomic, full-length handle.

It features a thinly ground drop point blade that makes it perfect for use as a skinner or EDC.

It is available in a variety of blade finishes, steel choices, and handle options.

The Park Ranger is being offered in both INFI and SR-101 steel in a wide, saber ground platform, making it tough enough to handle whatever you throw at it.

The INFI version is being offered in a Hand Applied Satin finish, a Busse Industrial Grade Double Cut (BIG DC) Finish, and a coated version.

The BIG DC Finish will be hand ground along the outer perimeter and will have light machine marks visible through the Double Cut finish.

The SR-101 Battle Grade version is being offered in a coated version ONLY.

Base Prices:
INFI Steel with a Hand Applied Satin Finish: $327.00
INFI Steel with a Busse Industrial Grade Double Cut (BIG DC) Finish: $277.00
INFI Steel Combat Grade with your choice of coating: $247.00
Battle Grade SR-101 Steel with your choice of coating: Regular Price if ran separately = $187.00. . . "Piggy Back Special" $157.00. . You save $30.00!!!

Handle Options:
Black, Tan, Maroon, or Green Canvas Micarta No extra charge.
Black G10 +$25.00
Multi Colored G10: Red and Black, Tan and Black, Blue and Black, Green and Black, Orange and Black +$35.00

Coating:
Black, Desert Sage, Muddy Brown, Forest Green, Midnight Blue, Desert Bronze, and Hammered Silver at No extra charge

BIG DC Finish
Park%20Ranger%20DC%205-X4.jpg


Combat Grade
Park%20Ranger%20CG%202-X4.jpg


Battle Grade
Park%20Ranger%20BG-X4.jpg

Click to expand...

I’d say Park Ranger
 
The Park Ranger is not even finished. I'd be thrilled if the Flak Jack came before my birthday which is in May.
 
I'd call in and get on the waiting list. You never know. There have been some awesome blades released since those and it is the holiday season which always bites the pocketbook so there may be some cancelations.
 
clampdaddy said:
I'd call in and get on the waiting list. You never know. There have been some awesome blades released since those and it is the holiday season which always bites the pocketbook so there may be some cancelations.
Click to expand...
Some of us are hoping ! Myself included :)
 
I think I've managed to pick up every blade I've asked to be put on the wait-list for. Or at least been contacted and offered for purchase.
 
mpjustin said:
Was this it?
HOG Badger Specs:
Blade Length: Approx. 5.9"
Over All Length: Approx. 10.9"
Thickness: Approx. 210"
Steel: INFI or SR-101
Hardness: 58-60 Rc
Bevel Flat Sabre
Handle Material: Optional
Finish: Optional

OsuLhGN.jpg
Click to expand...
My man! I think you nailed it. I was hoping not to have to pull out my knife case, which is just a big modified rifle case to take more pictures. Had to pull it out any way because for some reason I don't remember there being a lanyard hole.
 
Last edited:
Rusty Shakleford said:
My man! I think you nailed it. I was hoping not to have to pull out my knife case, which is just a big modified rifle case to take more pictures. Had to pull it out any way because for some reason I don't remember there being a lanyard hole.

Anyways, what do you suppose would be a decent asking price for this knife on ebay? My dad gave it to me along with a bunch of bark river knives but for reasons I won't go into I want to get rid of them. As an avid knife collector letting some go like the brk ambush and grizzly cub really stung.

Edit: kinda wanna keep this one but I'd be down to trade for a fix blade knife of equal value made from magnacut. Used or new
Click to expand...
You can't ask for pricing without paid membership on BF!
 
You must log in or register to reply here.
Back
Top