carbon fiber 940 or 943 scales giveaway! Winner chosen

jkwithawave

.....
Joined
Sep 8, 2011
Messages
2,693
Winner #17 GronK!


I recently bought a 940 off the exchange that came with both the stock scales and custom carbon fiber scales. I personally prefer the stock ones so I'm going to be giving these carbon fiber scales away to one of you lucky guys or gals.

A few things about them. They are a little thicker than stock scales, maybe 1-2 mm. Tip up right hand only. They come with the outside handle screws but not the tiny middle ones. The clips screws are a little slimmer than the BM screws. It will come with two and a BM deep carry clip. The previous owner took a Dremel to them so there's two grooves on them. Not entirely clean, but if the winner is handy with a Dremel or sand paper could easily be cleaned up.

Oh, somehow I forgot this detail. I'll close It down Thursday or Friday next week and draw a winner.



Rules

-US only
- paying members may enter
- registered users who have been here since 5/2/2014 may enter
- must be an active participant in the forums, not just on the exchange or here for giveaways
-1 entry per person

Good luck to all!





 
Last edited:
Not an entry, but thank you for the Great chance at scales for a Really Good edc blade. This will make aubergine Very happy!
 
I'll give it a shot! The c.f. on those scales is simply amazing! Really appreciate the giveaway.. somebody is gonna be happy!!
 
Back
Top