Caswell edx

JCaswell

JCaswell

Joined
Mar 12, 2006
Messages
2,264
Here are pix of the first EDX (one of 15 in the prototype batch).
It got plenty of pass-around time at the G2 show in Vegas last weekend!
It was also the happy recipient of "Most Unique Design" award.

The EDX is a heavy-duty cutting tool with thick Titanium frame (each side is .220 near the pivot and tapers to about .140 toward the back.)
Blade length is 3 1/4 and .160 thick, bronze bushings.

The EDX introduces V 2.0 of the patent-pending In-Line Clip which, in this case, is ONE PIECE with the lockbar. As a result, the clip retracts when the lockbar drops into place to lock the blade, and cams out to deploy when the blade is folded.
There is a strong detent for open and shut positions, but the EDX be flicked open with ease by means of the large 7/16 titanium thumbstuds.

The EDX also features the new patent-pending "LockDown Pivot System."
This is a special pivot system that allow for fine blade adjustment like a standard pivot, but unlike a standard pivot The "LockDown Pivot" is tightened down hard to become a stand-off, or structural member of the assembly---not a loose screw as with other pivots. This is beneficial because it offers structural support/rigidity/strength at the pivot point, a big improvement over conventional pivot technology.

Because of the enhanced assembly rigidity and location of this rigidity, the LockDown opens up new design opportunities, such as on the EDX. The EDX features two pivots, front and back and no other stand-offs or fasteners. It would not have been possible to do this (and still have a superiorly rigid assembly) without the "LockDown".

In case you're wondering, the DataMatrix code on the back of the blade replaces the standard litany of marks you'd expect on a knife. It can be read with a standard laser reader, or with a smartphone and one of the better free datamatrix-reader aps. IN fact, you should be able to scan it right off the screen with your phone.
It reads:

Caswell Knives
EDX (prototype)
CMP154CM, Bos

I'm pretty sure this represents the first time Datamatrix has been used on a knife.

Anyway, Hope you enjoy.
 

Attachments

  • EDXfrontopenmat.jpg
    EDXfrontopenmat.jpg
    49.5 KB · Views: 446
  • EDXfrontclosedmat.jpg
    EDXfrontclosedmat.jpg
    54.7 KB · Views: 417
  • EDXbackmat.jpg
    EDXbackmat.jpg
    45.5 KB · Views: 222
  • EDXbackopenscreen.jpg
    EDXbackopenscreen.jpg
    103.1 KB · Views: 262
I got the chance to handle this and discuss its design at length with Joe at The Gathering. For those of you who are interested in folders take note. This has smooth action with a retracting clip which is part of the locking mechanism. True genius. Joe really engineers his products well, the ease of use and safety of the lock is very impressive.

Eric
 
I really like this. First time seeing it.

As hard-use as it appears, I am drawn to the usage of the curves which blend into one another at the front. Just visually intriguing and gratifying.

Congrats on the well-deserved award.

Good for YOU!

Coop
 
Great work, Joe......I know you'd said you had a trick or two up your sleeve.....no kidding, huh?!? :D
 
Wow that is a great design and innovative at that. I love the sheepsfoot blade as well. Will you be making this part of your line that you can order?
 
Thanks for the kind words, everyone!

Barrabas74:
We'll be making run of these that should begin delivery in spring/summer '11.


BTW, The website now reflects the EDX and new CK-2. ---so there are a few more technical details there!:)
 
What's the deal with this piece! Is it ever going to be made? I am supposed to be on a "waiting list", but sooooo much time has passed.
All I can say is, I hope he has a day job!

Jeff
 
I've been told in the last few weeks that he's working on the first batch now, and had outside vendor delays for some time.

Yes, we're all anxious. I'm on the list as well. Let's hope for progress soon!

Coop
 
I got mine, with my favorite serial number, going on 2 years ago...... ;)

standard.jpg


It was one of the Protos but the 'production' batch should be along this Fall. :)
 
Sorry for the long absence from this thread!

Coop is right, there were delays with vendors --- crazy, stupid stuff. Eventually I gave up, fired them and dropped the $70K plus to bring those ops in house.
Making EDX parts all day every day now.

I'm pretty OCD about details, so cycle times are longer than they probably could be, but things are coming off looking very good.

Like Dudley says, I'm hoping to be able to begin delivery later this year.

The parts take a long time to make. Handle halves are machined from 1/4 Titanium plate, clip/lockbar and pivot hardware is done in hardened 17-4 and, etc. Plus, there are a lot of them. That's the only 'slowdown' now---the time it takes to make the parts x 200.

Thanks to everyone for their patience and interest in the EDX! Delivering this knife remains my top priority!
 
People don't realize how much planning and coordination go into making even something as simple as a folding knife. Particularly when it's your own money financing the operation. All it takes is one "minor" screw up on tolerances somewhere and the whole project is crap ... and your money is gone.

I honestly marvel at how something as complicated as an automobile or airplane ever gets made.

Dashiell Hammett once said, "The outcome of successful planning always looks like luck to saps."

Not saying anyone is a sap, just that most folks – including myself when I started out producing products – don't realize the amount of work that goes into even simple industrial production.

Good luck Joe, hang in there!
 
Thanks for checking in buddy and glad to hear that you're still taking nourishment...... ;)
 
^^^ To have Kevin Wilkins weigh in on the build's complexity is resounding.

Joe: Thanks for the update. I look forward to when you have to create a little shipping area... ;)

Coop
 
I've been drooling/waiting for mine too. Good that you are doing well and moving along.
My best to you and yours
ben
 
You must log in or register to reply here.
Back
Top