Check out the Scrap Yard Forum - Build your own Weiner.

UDDwaine

UDDwaine

Joined
Apr 8, 2007
Messages
2,680
Just like the Tank Buster, Dan is allowing buyers to build their own Weiner.

Options are:

Anorexic
Boney
Chubby
Double Cut
Chisel Cut
Stripped and Polished

and a few more options to be named later.



:-)
 
CHISEL CUT! :barf::barf::barf:

Good lawd... what is the world coming to!!! :eek:


I only hope Lycosa sends a thank you letter to Dan and Jerry... :p
 
Id want my mine stripped and polished :D
 
Last edited:
How exactly does one apply a chisel cut? :confused: Start hammering away on the blank with a chisel? Is there a particular pattern to follow?

It seems like the cuts into the steel wouldn't have any benefit, and would in fact have a lot of downsides like gathering gunk, catching on the medium being cut and decreasing the overall integrity of the knife by adding multiple stress points to list a few.

Now a chisel edge I can understand. I wouldn't want one. Just my personal preference, but at least I know what it is and have used them before. A chisel cut though, I'm befuddled.

∞
 
UDDwaine said:
Just like the Tank Buster, Dan is allowing buyers to build their own Weiner.

Options are:

Anorexic
Boney
Chubby
Double Cut
Chisel Cut
Stripped and Polished

and a few more options to be named later.



:-)
Click to expand...

I was just there and didn't see the thread, can you link it for me
 
RVO3VOM said:
How exactly does one apply a chisel cut? :confused: Start hammering away on the blank with a chisel? Is there a particular pattern to follow?

It seems like the cuts into the steel wouldn't have any benefit, and would in fact have a lot of downsides like gathering gunk, catching on the medium being cut and decreasing the overall integrity of the knife by adding multiple stress points to list a few.

Now a chisel edge I can understand. I wouldn't want one. Just my personal preference, but at least I know what it is and have used them before. A chisel cut though, I'm befuddled.

∞
Click to expand...

Who said anything about cutting into steel?
 
So they make a chisel-cut knife for Lycosa and we've got 100's of posts to the Hog-Muk thread and they don't make that. What is this world coming to?
 
UDDwaine said:
Who said anything about cutting into steel?
Click to expand...

Since a Double Cut finish is applied to the blade I figured that the Chisel Cut finish must also be applied to the blade. I could be wrong and the Chisel Cut may be applied to the handle instead. Why this would be done to a Resiprene-C handle I have no idea, but we are talking about Scrap Yard Dawgs here so anything is possible. :eek: :D ;)


I believe Lycosa has been asking for a CHISEL EDGE.


∞
 
RVO3VOM said:
Since a Double Cut finish is applied to the blade I figured that the Chisel Cut finish must also be applied to the blade. I could be wrong and the Chisel Cut may be applied to the handle instead. Why this would be done to a Resiprene-C handle I have no idea, but we are talking about Scrap Yard Dawgs here so anything is possible. :eek: :D ;)


I believe Lycosa has been asking for a CHISEL EDGE.


∞
Click to expand...

Read between the lines just a little more... :-)
 
You must log in or register to reply here.
Back
Top