- Joined
- Oct 16, 2010
- Messages
- 5,628
The first knife out of my new shop in Maine! I've had this piece of stag for about two years and designed the knife around the scales. 
The 3/16" thick D-2 stock was deeply hollow ground with a 2" wheel to .035" and 25 degree bevels applied for a robust edge suitable for chopping open boxes or other less delicate work.....the harpoon style clip is sharpened similarly. The highly tapered tang is tapered down to about .015" at the butt. I hope you like it!
V/R,
TK
3/16" D-2 stock
HT to Rc 59-60
8 1/2" OAL
4 1/4" Double hollow ground blade
Pinned/soldered guard
Spine thumb serrations
600 grit satin flats and furniture
Ultrafine scotchbrite hollowgrinds
Premium Sambar stag scales
416 Stainless furniture
Tapered tang with red liners
R or L hand sheath - specify
The 3/16" thick D-2 stock was deeply hollow ground with a 2" wheel to .035" and 25 degree bevels applied for a robust edge suitable for chopping open boxes or other less delicate work.....the harpoon style clip is sharpened similarly. The highly tapered tang is tapered down to about .015" at the butt. I hope you like it! V/R,
TK
3/16" D-2 stock
HT to Rc 59-60
8 1/2" OAL
4 1/4" Double hollow ground blade
Pinned/soldered guard
Spine thumb serrations
600 grit satin flats and furniture
Ultrafine scotchbrite hollowgrinds
Premium Sambar stag scales
416 Stainless furniture
Tapered tang with red liners
R or L hand sheath - specify
