Cop Tool kydex sheath belt clip

[Mike2636]

Can anyone point me to a belt clip for the Kydex sheath for the Boker Cop Tool. The included leather sheath is about twice as long as the tool. The Kydex that I ordered at the same time has no clip !!! It has three holes on the side and one on the bottom. I would really like to find one big enough for a duty belt but I'll take what I can find.

Thanx,
Mike

 

[Kiah]

What is the center to center distance on the sheath's hole spacing and how wide is your duty belt?

Edit: Looked it up and I'm guessing the widest hole spacing is 1.5"? If so, a Large Tek-Lok should suit your need if your belt isn't wider than 2.25".

 

[Mike2636]

What is the center to center distance on the sheath's hole spacing and how wide is your duty belt?

Edit: Looked it up and I'm guessing the widest hole spacing is 1.5"? If so, a Large Tek-Lok should suit your need if your belt isn't wider than 2.25".

I've spent half of an hour trying to upload an image and gave up. Your guess of 1.5" appears to be accurate. However, the large Tek-Lok is prolly overkill and IMO takes up too much "real estate". Your reply did send me in the right direction. The small molle-lock looks about right. The obvious issue is that the mounting holes are all on one side of the sheath. Thanx for the reply.
Mike

 

[Kiah]

I've spent half of an hour trying to upload an image and gave up. Your guess of 1.5" appears to be accurate. However, the large Tek-Lok is prolly overkill and IMO takes up too much "real estate". Your reply did send me in the right direction. The small molle-lock looks about right. The obvious issue is that the mounting holes are all on one side of the sheath. Thanx for the reply.
Mike

No disagreement on the bulkiness of the Tek-Lok. Not a fan myself. You might check out the sheath making > mounting section of KnifeKits and see if anything there suits your need. As for the MOLLE-Lok, they have a very narrow opening and aren't really made to go on a belt (unless it has MOLLE webbing sewn on).