- Joined
- Jan 9, 2011
- Messages
- 416
Afternoon all! Recently finished these and wanted to share. These are all listed in the knife maker for sale section if you're interested.
Steel is CPM 154 58-60Rc
All have a high polish with mill scale left on the flats.
All are 3/32" thick and 1" tall. They will make excellent slicers and are shaving sharp! These knives also
are very comfortable and fill the hand nicely. I wear medium to large gloves and can fit all four fingers on the handles.
Cord wrap- Convex ground with top swedge. 6 1/8" OAL, 3" grip to tip. The handle is wraped with one
bottom layer of gutted OD paracord and one top layer of complete black paracord.
It has been epoxy soaked. Black kydex sheath.
Jade/ ghost green 1/4" thick g10 - Convex ground with clip point. 5 1/8" OAL, 2 3/8" grip to tip.
Handle has black liners and is fastened with epoxy and 1/4" carbon fiber pins. Coyote brown kydex sheath.
Coyote brown 1/8" thick g10- Convex ground drop point. 5 11/16" OAL, 2 9/16" grip to tip.
Handle has black liners and is fastened with epoxy and 1/4" carbon fiber tubes. Black kydex sheath.
Textured black 1/4" thick g10- Hollow ground drop point. 5 3/4" OAL, 2 9/16" grip to tip.
Handle is fastened with epoxy and flared stainless tubes. Black kydex sheath.
All sheaths are riveted for large teklok and have positive retention with no worries of the blade falling out during inverted carry.
Thanks for looking and have a good one!
Steel is CPM 154 58-60Rc
All have a high polish with mill scale left on the flats.
All are 3/32" thick and 1" tall. They will make excellent slicers and are shaving sharp! These knives also
are very comfortable and fill the hand nicely. I wear medium to large gloves and can fit all four fingers on the handles.
Cord wrap- Convex ground with top swedge. 6 1/8" OAL, 3" grip to tip. The handle is wraped with one
bottom layer of gutted OD paracord and one top layer of complete black paracord.
It has been epoxy soaked. Black kydex sheath.
Jade/ ghost green 1/4" thick g10 - Convex ground with clip point. 5 1/8" OAL, 2 3/8" grip to tip.
Handle has black liners and is fastened with epoxy and 1/4" carbon fiber pins. Coyote brown kydex sheath.
Coyote brown 1/8" thick g10- Convex ground drop point. 5 11/16" OAL, 2 9/16" grip to tip.
Handle has black liners and is fastened with epoxy and 1/4" carbon fiber tubes. Black kydex sheath.
Textured black 1/4" thick g10- Hollow ground drop point. 5 3/4" OAL, 2 9/16" grip to tip.
Handle is fastened with epoxy and flared stainless tubes. Black kydex sheath.
All sheaths are riveted for large teklok and have positive retention with no worries of the blade falling out during inverted carry.
Thanks for looking and have a good one!
