Current (or coming soon) Becker Line Up Comparison Chart

[cautioning]

So, I was thinking it would be a good resource to have a table comparing all the differences of the Becker line up. I found different numbers from various sources and took my best guess at determining the most accurate source. Please check it out and tell me if you see any errors, or if you want me to add anything.

Here it is in PDF form: Click Me

[table="width: 500, class: grid, align: center"]
[tr]
[td]Becker Knife Current Production Knives (2/2012)[/td]
[td]BK-02 - Campanion[/td]
[td]BK-03 - Tac Tool [/td]
[td]BK-04 - MachAx[/td]
[td]BK-05 - Magnum Camp[/td]
[td]BK-07 - Combat Utility[/td]
[td]BK-09 - Combat Bowie[/td]
[td]BK-11 - Necker[/td]
[td]BK-13 - Remora[/td]
[td]BK-14 - EsKaBar[/td]
[td]BK-15 Trailing Point[/td]
[td]BK-16 Drop Point[/td]
[td]BK-17 Clip Point[/td]
[/tr]
[tr]
[td]Blade shape [/td]
[td]drop point[/td]
[td]chisel point[/td]
[td]clip point[/td]
[td]trailing point[/td]
[td]clip point[/td]
[td]clip point[/td]
[td]drop point[/td]
[td]drop point[/td]
[td]drop point[/td]
[td]trailing point[/td]
[td]drop point[/td]
[td]clip point[/td]
[/tr]
[tr]
[td]Edge Angle[/td]
[td]20 degrees[/td]
[td]15 degrees[/td]
[td]??[/td]
[td]20 degrees[/td]
[td]20 degrees[/td]
[td]20 degrees[/td]
[td]15 degrees[/td]
[td]15 degrees[/td]
[td]15 degrees[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[/tr]
[tr]
[td]Grind[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[td]flat[/td]
[/tr]
[tr]
[td]Steel[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]440A Stainless Steel[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[td]1095 CroVan[/td]
[/tr]
[tr]
[td]Rc hardness[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]55-57[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[td]56-58[/td]
[/tr]
[tr]
[td]Blade length[/td]
[td]5.25 inches[/td]
[td]7 inches[/td]
[td]14.6875 inches[/td]
[td]8.0 inches[/td]
[td]7 inches[/td]
[td] 9 inches[/td]
[td]3.25 inches[/td]
[td]2.25 inches[/td]
[td]3.25 inches[/td]
[td]5.5 inches[/td]
[td]4.375 inches[/td]
[td]4.375 inches[/td]
[/tr]
[tr]
[td]Blade height[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[/tr]
[tr]
[td]Overall length[/td]
[td]10.5 inches[/td]
[td]12.5 inches[/td]
[td]9.375 inches[/td]
[td]13.5 inches[/td]
[td]12.75 inches[/td]
[td]14.75 inches[/td]
[td]6.75 inches[/td]
[td]5.125 inches[/td]
[td] 7.0 inches[/td]
[td]10.375 inches[/td]
[td]9.25 inches[/td]
[td]9.25 inches[/td]
[/tr]
[tr]
[td]Blade thickness[/td]
[td]0.25 inches[/td]
[td]0.25 inches[/td]
[td].188 inches[/td]
[td].188 inches[/td]
[td].188 inches[/td]
[td]0.188 inches[/td]
[td]0.165 inch[/td]
[td]0.125 inch[/td]
[td]0.165 inch[/td]
[td]0.165 inch[/td]
[td]0.165 inch[/td]
[td]0.165 inch[/td]
[/tr]
[tr]
[td]Knife Weight[/td]
[td]13.34 ounces[/td]
[td]20.8 ounces [/td]
[td]15.2 oz[/td]
[td]12.0 oz[/td]
[td]13.6 ounces[/td]
[td]16.8 ounces[/td]
[td]2.4 ounces[/td]
[td]1.1 ounces[/td]
[td]2.65 ounces[/td]
[td]6.2 ounces[/td]
[td]6.7 ounces[/td]
[td]6.6 ounces[/td]
[/tr]
[tr]
[td]Knife + Sheath Weight[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[/tr]
[tr]
[td]Handle[/td]
[td]Grivory-GV-6H[/td]
[td]Grivory-GV-6H[/td]
[td]Grivory-GV-6H[/td]
[td]Grivory-GV-6H[/td]
[td]Grivory-GV-6H[/td]
[td]Grivory-GV-6H[/td]
[td]Skeletonized - optional micarta handle[/td]
[td]Skeletonized / bead blasted[/td]
[td]Skeletonized - optional Zytel Handles[/td]
[td]2 sets of Zytel black/coyote brown[/td]
[td]2 sets of Zytel black/coyote brown[/td]
[td]2 sets of Zytel black/coyote brown[/td]
[/tr]
[tr]
[td]Sheath[/td]
[td]Hard Plastic w/ detachable nylon webbing for belt carry[/td]
[td]Hard Plastic w/ detachable nylon webbing for belt carry[/td]
[td]Heavy-Duty Polyester w/ liner, front pocket and sheath for Remora[/td]
[td]Heavy-Duty Polyester w/ liner, front pocket and sheath for Remora[/td]
[td]Heavy-Duty Polyester w/ liner, front pocket and sheath for Remora[/td]
[td]Heavy-Duty Polyester w/ liner, front pocket and sheath for Remora[/td]
[td]Hard Plastic - 550 cord included (for wrapping handle or neck carry) optional belt clip[/td]
[td]Hard Plastic[/td]
[td]Hard Plastic - 550 cord included (for wrapping handle or neck carry) optional belt clip[/td]
[td]Tan Cordura Nylon w/ liner, MOLLE Compatible[/td]
[td]Tan Cordura Nylon w/ liner, MOLLE Compatible[/td]
[td]Tan Cordura Nylon w/ liner, MOLLE Compatible[/td]
[/tr]
[tr]
[td]Knife origin[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[td]USA[/td]
[/tr]
[tr]
[td]Sheath origin[/td]
[td]China[/td]
[td]Taiwan[/td]
[td]??[/td]
[td]China[/td]
[td]China[/td]
[td]China[/td]
[td]Taiwan[/td]
[td]China[/td]
[td]Taiwan[/td]
[td]??[/td]
[td]??[/td]
[td]??[/td]
[/tr]
[tr]
[td]MSRP[/td]
[td]US$112.06[/td]
[td]US$151.60[/td]
[td]US$135.67[/td]
[td]US$128.04[/td]
[td]US$125.16[/td]
[td]US$141.16[/td]
[td]US$59.26[/td]
[td]US$32.96[/td]
[td]US$59.26[/td]
[td]US$107.49[/td]
[td]US$107.49[/td]
[td]US$107.49[/td]
[/tr]
[tr]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[/tr]
[tr]
[td]Ka Bar Accessories[/td]
[td]Green canvas micarta handle set - US$40.00[/td]
[td]Green canvas micarta handle set - US$40.00[/td]
[td]Green canvas micarta handle set - US$40.00[/td]
[td]Green canvas micarta handle set - US$40.00[/td]
[td]Green canvas micarta handle set - US$40.00[/td]
[td]Green canvas micarta handle set - US$40.00[/td]
[td]Green canvas micarta handle set - US$30.00[/td]
[td][/td]
[td]2 sets of Zytel handles black/orange - US$16.37[/td]
[td]Not yet in production - Micarta handles - US$??.??[/td]
[td]Not yet in production - Micarta handles - US$??.??[/td]
[td]Not yet in production - Micarta handles - US$??.??[/td]
[/tr]
[tr]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td][/td]
[td]Metal Belt Clip - US$11.50[/td]
[td][/td]
[td]Metal Belt Clip - US$11.50[/td]
[td][/td]
[td][/td]
[td][/td]
[/tr]
[tr]
[td][/td]
[/tr]
[/table]


Edit: I gave up on trying to embed it and figured out how to convert it to a table.

 

[The Warrior]

WTF?

 

[Murphnuge]

Did I win yet?!

 

[cautioning]

yeah... sorry guys. I just made up a spreadsheet comparing all the beckers and I was trying out different code and then hitting preview post. I hit the post button by accident. I am going to continue working on it while and then edit the post and add it. I guess we can get the ball rolling on the thread though and I'll get back to trying to embed. I'll update my main post within the next couple of minutes.

 

[tradewater]

Thanks for the chance, I'll take #645.

 

[The Warrior]

I think the winner has already been announced.

 

[cautioning]

Did I win yet?!

LOL Huh?

If you guys could let me know if that links works for you that would be sweet.

 

[Murphnuge]

Trade, it only goes up to 473. Anyway, spreadsheet looks good to me. Did you consult the sharp kitty's database?

 

[bld522]

Yep. Got it.

 

[Murphnuge]

LOL Huh?

If you guys could let me know if that links works for you that would be sweet.

Running joke round here, unless I really did win something? Yeah, link worked great for me.

 

[Bladite]

for the current line up the PDF is the way to go for the most accurate official information.

then, when we have knives in hand, we can measure and mic them and see what's up.

you strippers should also mic yours so we can determine overall coating thicknesses.

and of course, for historical purposes... yeah, there's that thing over there... it's mostly right.

 

[Murphnuge]

for the current line up the PDF is the way to go for the most accurate official information.

then, when we have knives in hand, we can measure and mic them and see what's up.

you strippers should also mic yours so we can determine overall coating thicknesses.

and of course, for historical purposes... yeah, there's that thing over there... it's mostly right.

We prefer, entertainers.

 

[cautioning]

I used the blade database and the new pdf for most things. I had to search a couple of things. I put in the weight with sheath and blade height because I figured that would be good info to have on hand. I am hoping some of you might have some numbers I could update it with. It sucks I wasn't able to embed the google doc as updating it will be more difficult and we lose the pretty grid lines. If anyone has code I could try to embed with that would be sweet. Would we want to have stripped and unstripped thicknesses? I am not sure how exact we want this to be, would we want posted specs or personal specs as those will change user to user more dependent on how calibrated their instruments are or if they got a thick/thin one. I don't really know and I am down for whatever. This is for everyone so however people feel and I will update the post.


I am going to be constantly updating errors... I just spotted a big one 8)

 

[cautioning]

Oh, haha no winners here... only losers!

 

[cautioning]

Nice, I got lines added. Any ideas on having to scroll right? (I'm not on a widescreen, is there any scrolling for you?)

 

[Bladite]

your best bet is to print the document as a PDF, wide format, and see what you can do with hosting that.

not everyone can view a spreadsheet, and certainly not with proper formatting. printed, you can tailor it how you like.